Copal CS-4-12NC Rotary selector switches (smd) Datasheet

ROTARY SELECTOR SWITCHES (SMD)
CS-4
INTERNAL STRUCTURE
RoHS compliant
①
②
③
④
⑤
⑥
⑦
Part name
■ FEATURES
O RoHS compliant
O Optimum for high density board mounting applications
O Compatible with most automatic pick & place machinery
(J-hook and Gull wing types only)
O Compatible with reflow and wave soldering
O Protection against dust and washable after soldering
O Excellent reliability due to precious metal contact
Material
Flammability
UL94V-0
①
Rotor
Polyphenylenesulphide
②
Cover
Stainless steel (SUS 304)
③
“O” ring
④
Fixed contact
⑤
Terminal pin
⑥
Housing
⑦
Slider contact
Silicone rubber
UL94HB
Copper alloy, Gold-plated
Epoxy
UL94V-0
※ LCP
( LC polymer)
Multi metal alloy
※:1 pole 4 contacts only
■ PART NUMBER DESIGNATION
CS-4 - 1 3 N T A
Series name
Shape of terminal
A:J-hook
B:Gull wing
C:Through hole pins
No. of poles
Form of packaging
1:1 pole
2:2 poles
T:Taping (Reel)
Blank:Bulk in plastic bag
No. of contacts
2:2 contacts
3:3 contacts
4:4 contacts
Contact timing
N:Non-shorting (1 pole 3, 4 contacts only)
Y:Non-shorting with neutral detent
(1pole 2 contacts, 2 poles 2 contacts)
X:Non-shorting without neutral detent (1 pole 2 contacts only)
※ Please refer to the LIST OF PART NUMBERS when placing orders.
CS-4
ROTARY SELECTOR SWITCHES (SMD)
■ SCHEMATICS DIAGRAMS
O1 pole 2 contacts
Series
O1 pole 3 contacts
Switching specifications
Schematic
Series
Switching specifications
C
C
CS-4-12YA
〃
YTA
〃
YB
〃
YTB
〃
YC
C
1
ON
XTA
〃
XB
〃
XTB
〃
XC
〃
NB
〃
NTB
2
3
C
OFF
C
〃
NTA
2
1
2
2
ON
O2 poles 2 contacts
1
ON
2
1
Series
2
C
Switching specifications
1
ON
1
C
2
2
C
1
C
1
CS-4-22YA
〃
Switching specifications
Schematic
〃
〃
NB
〃
NTB
C
2
OFF
YB
1
C
〃
1
YTB
C
2
C
2
2
ON
2
C
NTA
〃
1
1
YTA
ON
3
C
1
C
4
Schematic
ON
2
O1 pole 4 contacts
CS-4-14NA
3
C
C
C
2
ON
C
NC
1
3
C
ON
Series
C
ON
1
〃
1
C
CS-4-13NA
C
2
1
CS-4-12XA
Schematic
2
1
ON
2
C
C
3
4
ON
C
3
4
ON
■ LIST OF PART NUMBERS
Circuit type
1 pole
2 contacts
With neutral detent
Without neutral detent
1 pole 3 contacts
1 pole 4 contacts
2 poles 2 contacts
Form of packaging
A
J-hook
B
Gull wing
Taping
Plastic bag
Taping
Plastic bag
Taping
Plastic bag
Taping
Plastic bag
Taping
Plastic bag
CS-4-12YTA
CS-4-12YA
CS-4-12XTA
CS-4-12XA
CS-4-13NTA
CS-4-13NA
CS-4-14NTA
CS-4-14NA
CS-4-22YTA
CS-4-22YA
CS-4-12YTB
CS-4-12YB
CS-4-12XTB
CS-4-12XB
CS-4-13NTB
CS-4-13NB
CS-4-14NTB
CS-4-14NB
CS-4-22YTB
CS-4-22YB
: Not manufactured
※ Verify the above part numbers when placing orders.
Taping version can be supplied only in reel unit.
C
Through hole pin
CS-4-12YC
CS-4-12XC
Pieces in package
500 pcs. /reel
50 pcs./pack
500 pcs./reel
50 pcs./pack
500 pcs./reel
50 pcs./pack
500 pcs./reel
50 pcs./pack
500 pcs./reel
50 pcs./pack
CS-4
ROTARY SELECTOR SWITCHES (SMD)
■ STANDARD SPECIFICATIONS
1 pole 2 contacts
1 pole 3 contacts
1 pole 4 contacts
■ ELECTRICAL CHARACTERISTICS
2 poles 2 contacts
Operating temperature range
− 25 ~ 70 °C
Contact rating
Maximum current
Minimum current
Maximum voltage
Minimum voltage
Storage temperature range
− 40 ~ 70 °C
Contact timing
Circuit type
Sealing
Net weight
No. of positions
Non-shorting
100 mΩ maximum
Contact resistance
Washable by “O” ring
※ Please refer to page 150, 151
100 MΩ (DC500 V) minimum
Insulation resistance
Approx. 0.08 g (CS-4-12, CS-4-13)
Approx. 0.1 g (CS-4-14, CS-4-22)
■ MECHANICAL CHARACTERISTICS
0.5 VA
100 mA
1 μA
16 V
20 mV
AC500 V, 60 s
Dielectric strength
■ ENVIRONMENTAL CHARACTERISTICS
Amplitude 1.5 mm or
Acceleration 98 m/s2,
10-500-10 Hz,
3 directions for 2 h each
490 m/s2, 11 ms
6 directions for 3 times each
200 cycles minimum
DC16 V, 30 mA
2, 3, 4
Vibration
Adjustment torque
10 mN·m {102 gf·cm} maximum
Stopper strength
25 mN·m {255 gf·cm} minimum
Soldering heat
45°
90° (CS-4-12X only)
Load life
245 ± 3 °C, 2 ~ 3 s
Humidity (Steady state)
Flow : 260 ± 3 °C as the temperature
in a pot of molten solder,
immersion from head of terminal to backside of board,
5 ~ 6 s, two times maximum
Reflow : Peak temperature 255 °C
(Please refer to the profile below.)
Manual soldering:350 ± 10 °C, 3 ~ 4 s
Shear (Adhesion)
5 N {0.51 kgf}, 10 s
Substrate bending
Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength
5 N {0.51 kgf}, 10 s
{ } : Reference only
40 °C, Relative humidity 90 ~ 95 %, 48 h
High temperature exposure
70 °C, 16 h
Low temperature exposure
− 40 °C, 16 h
Thermal shock
− 40 (0.5 h) ~ 70 °C (0.5 h), 5 cycles
〈Reflow profile for soldering heat evaluation〉
(C)
250
Peak : 250
+5
0
C
Over 230 C
Temperature
Stepping angle
Shock
200
150
180 C
Pre Heating Zone
150 C
90 30 s
100
50
30 10 s
Heating time
Soldering Zone
Reflow : two times maximum
CS-4
ROTARY SELECTOR SWITCHES (SMD)
■ OUTLINE DIMENSIONS
Unless otherwise specified, tolerance: ± 0.3
OCS-4-12YA
OCS-4-12YB
1.2
Production date code
Production date code
C
2.3
1
OCS-4-12YC
2.3
1
2.54
41
2.3
2.35
OCS-4-12XC
0.6 W × 2.3 L × 0.5 D
0.35 min.
Production date code
5
2.3
0.35 min.
2
3 – 0.6
t = 0.15
Production date code
C
4.5
6.2
4.5
C
1.2
5.08
0.6 W × 2.3 L × 0.5 D
2 – 0.8
t = 0.15
1
2
2.3
5
2.35
OCS-4-13NA
41
2.54
OCS-4-13NB
0.6 W × 2.3 L × 0.5 D
0.6 W × 2.3 L × 0.5 D
1.2
0.35 min.
Production date code
Production date code
C
2.3
1.3
3 – 0.5
t = 0.15
1.3
6.2
1.2
1 2 3
5
2.3
1.3
3 – 0.5
t = 0.15
1.3
OCS-4-14NB
0.6 W × 2.3 L × 0.5 D
0.6 W × 2.3 L × 0.5 D
6 – 0.5
t = 0.15
Production date code
4 3 2
2.3
1.3
1.3
135
Moving range
5
2.3
0.35 min.
3 – 45
Step angle
3 – 45
Step angle
4 3 2
135
Moving range
6 – 0.5
t = 0.15
6.2
NC C 1
4.5
3
4.5
5.2– 00.5
Production date code
0.35 min.
OCS-4-14NA
0.35 min.
5
4.5
3
4.5
5.2 – 00.5
C
2 3
5
2 – 0.8
t = 0.15
2
5
OCS-4-12XB
3
5.2 – 00.5
4.5
5.08
4.5
2
5
1.2
C
C
NC C 1
2 – 0.8
t = 0.15
2.35
0.6 W × 2.3 L × 0.5 D
Production date code
3 – 0.6
t = 0.15
Production date code
1
2.3
OCS-4-12XA
0.6 W × 2.3 L × 0.5 D
1
2
5
2.35
0.35 min.
2 – 0.8
t = 0.15
2
5
1.2
6.2
4.5
3
4.5
5.2 – 00.5
C
1
0.35 min.
0.6 W × 2.3 L × 0.5 D
0.6 W × 2.3 L × 0.5 D
1
(Unit: mm)
1.3
1.3
CS-4
ROTARY SELECTOR SWITCHES (SMD)
■ OUTLINE DIMENSIONS
Unless otherwise specified, tolerance: ± 0.3
0.6 W × 2.3 L × 0.5 D
0.6 W × 2.3 L × 0.5 D
1
3
4.5
1 C
2
5
2.3
1.3
1.3
2
Production date code
C 1
5
2.3
■ RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS
OCS-4-12YA
OCS-4-12XA
6 – 0.5
t = 0.15
6.2
2 C
Production date code
4.5
2
5.2– 00.5
1 C
6 – 0.5
t = 0.15
0.35 min.
OCS-4-22YB
0.35 min.
OCS-4-22YA
(Unit: mm)
1.3
2
(Unit: mm)
OCS-4-12YB
OCS-4-12XB
2
0
2
2
0
4
2
2
2
1.6
1.6
2.35
1.3
1.5
0.6
1.3
0
1.3
1.5
5
0.6
1.5
1.3
1.3
OCS-4-14NB
OCS-4-22YB
3
0.6
1.5
0
0
1.5
1.3
OCS-4-14NA
OCS-4-22YA
2
OCS-4-13NB
1.5
1.5
0.6
1.5
0
2.35
3
2
OCS-4-13NA
1.6
5
1.6
1.3
1.3
1.3
Note) The zero point is the center of mounting.
CS-4
ROTARY SELECTOR SWITCHES (SMD)
■ SOLDERING CONDITIONS
When dip-soldering CS-4-13NA, NB or CS-4-22YA, YB,
solder bridges may occur between terminals depending
upon soldering conditions.
In order to prevent such bridges,vertical flow direction is
recommended as shown in the below figure.
For dip-soldering,preheating should be done after applying flux.
Handle carefully in case of parallel flow direction in which
solder bridges occur more often because solder flow
moves toward the vertical direction against the terminals.
In addition, other soldering conditions such as soldering
temperature, preheating temperature, specific gravity of
flux, and belt speed affect the occurrence of bridges.
Depending on flux to be applied, markings may, though at
rare case, disappear or fade out at soldering. Please make
sure before its use.
Flow direction
CS-4-13NA, NB
CS-4-22YA, YB
P.C.B.
P.C.B.
Vertical
Solder
bath
Parallel
Solder
bath
CS-4
ROTARY SELECTOR SWITCHES (SMD)
■ PACKAGING SPECIFICATIONS
<Taping packaging specifications>
OTaping version is packaged in 500 pcs. per reel.
Orders will be accepted for units of 500 pcs., i.e., 500,
1000, 1500 pcs., etc.
O Taping version is boxed with 4 reels (2000 pcs.).
Maximum number of consecutive missing pieces=2
Leader length and reel dimension are shown in the diagrams below:
OReel dimensions
OEmbossed tape dimensions
(Unit: mm)
(Conforms to JIS C 0806-3)
(In accordance with EIAJ ET-7200A)
Empty
Filled
13
Empty
φ 21±0.8
End
2±0.5
Direction of feed
φ 60 +10
Head
40 mm min.
20 pitches min.
Leader
400 mm min.
φ 13±0.2
0
φ 180 –1.5
OCS-4- □□□ TA/CS-4- □□□ TB
15.4±1
(Conforms to JIS C 0806)
(Unit: mm)
80.1
40.1
20.05
1.750.1
φ 1.5 +0.1
0
+1
0
0.30.1
(CS-4A)
12
5.50.05
Installation example
2.7
Direction of feed
<Bulk pack specifications>
OThe smallest unit of bulk pack in a plastic bag is 10 pcs.
per pack. Orders will be accepted for unit of minimum 10
pcs., i.e., 10, 20, 30 pcs. , etc.
O Boxing of bulk in a plastic bag is performed with 50 pcs.
(standard 500 pcs.) per box.
Similar pages