ITT E211J50AV2K22 Sealed miniature rocker and lever handle switch Datasheet

C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
Features/Benefits
• Sealed against solder and cleaning
Typical Applications
• Telecommunications
process contaminants
• Instrumentation
• ESD Resistance—all actuator options • Computers & peripherals
• Rocker, case & bushing UL 94V-0
• RoUS compliant
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS
@125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models):
5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC.
See page H-37 for additional ratings.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0).
ACTUATOR: Nylon, black standard, internal o-ring seal standard
with all actuators.
FRAME: Spring steel, black standard.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
ACTUATOR PIVOT & MOUNTING BRACKET: Nylon.
ACTUATOR PIVOT RETAINER: Stainless steel.
CONTACTS & TERMINALS: B contact material: Copper alloy, with gold
plate over nickel plate. Q contact material: Copper alloy, silver
plated. See page H-37 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel.
Standoff: Nylon standard, aluminum available, consult Customer
Service Center.
ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break
cycles at full load. E3XX models: 30,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator
options: 15,000 V DC max. @ sea level, actuator to terminals.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
Rocker
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages H-26 through H-39. For additional options not shown in catalog, consult Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
E101 SP On-None-On
E103 SP On-Off-On
E105 SP Mom.-Off-Mom.
E107 SP On-Off-Mom.
E108 SP On-None-Mom.
E201 DP On-None-On
E203 DP On-Off-On
E205 DP Mom.-Off-Mom.
E207 DP On-Off-Mom.
E208 DP On-None-Mom.
E211 DP On-On-On
E213 DP On-On-Mom.
E215 DP Mom.-On-Mom.
E301 3P On-None-On
Actuator
J1 .531 long rocker
J2 Lever
J3 .906" long rocker
J11 Rocker with frame
J21 Lever with frame
J50 .362" long rocker
J60 Lever
J90 Lever
Terminations
A
Right angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
C
PC Thru-hole
Z
Solder lug
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460" high, V-bracket
V7 .630" high, V-bracket
V8 .953" high, V-bracket
V21 .555" high, V-bracket, snap-in
V31 .460" high, V-bracket, snap-in
Contact Material
B Gold
K Gold, tin-lead
P Gold, matte tin
Q Silver
M Silver, tin-lead
S Silver, matte-tin
G Gold over silver
L Gold over silver, tin-lead
R Gold over silver, matte-tin
Seal
E Epoxy
Actuator Color
2 Black
Frame Color
3 Red
2 Black
NONE No frame color required
Metal Frame Color
(J11, J21 Actuators)
2 Black
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–26
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
SP
MODEL
NO.
POS. 2
CONNECTED TERMINALS
POS. 3
C&K marking on opposite side
E101
ON
NONE
ON
E103
ON
OFF
ON
E105
MOM.
OFF
MOM.
E107
ON
OFF
MOM.
E108
ON
NONE
MOM.
POS. 1
POS. 2
POS. 3
C&K marking on opposite side
SCHEMATIC
N/A
OPEN
2-3
2-1
SPDT
N/A
SPDT
Terminal Nos.
For Reference Only
Part number shown: E101J1ZBE2
E201
ON
NONE
ON
E203
ON
OFF
ON
E205
MOM.
OFF
MOM.
E207
ON
OFF
MOM.
E208
ON
NONE
MOM.
E211**
ON
ON
ON
E213**
ON
ON
MOM.
E215**
MOM.
ON
MOM.
DP
N/A
OPEN
2-3,5-6
2-1,5-4
N/A
2-3,5-4
DPDT
DPDT
MOM. = Momentary
All models
** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog.
Rocker
Terminal Nos.
For Reference Only
Part number shown: E201J1ZBE2
with all options when ordered with G, L, M or Q contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–27
www.ittcannon.com
H
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
C&K marking on opposite side
E301
3P
SWITCH FUNCTION
POS. 2
POS. 3
ON
NONE
ON
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
C&K marking on opposite side
2-3,5-6,8-9
N/A
SCHEMATIC
2-1,5-4,8-7
3PDT
3PDT
Terminal Nos.
For Reference Only
Part number shown: E301J1ZBE2
MOM. = Momentary
All models
with all options when ordered with G, L, M or Q contact material.
** Wiring for 3-way switch, see Technical Data section of this catalog.
ACTUATOR COLOR
ACTUATOR–PANEL REAR MOUNT
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
3
RED
J1
LEVER
J2
LEVER
ACTUATOR
Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer
Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on switches with panel
mounting bracket. Internal o-ring actuator seal
standard. Actuators available separately, see
page H-37. Hardware available seperately, see
Technical Data section of this catalog. J1, J2 actuators available with C, Z or Z3 terminations.
PANEL MOUNTING
Rocker
J1 & J2 Actuators
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–28
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–REAR MOUNT
J11
ACTUATOR
FRAME COLOR
ROCKER WITH FRAME
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
3
RED
OPTION
CODE
2
FRAME COLOR
BLACK
NOTE: This option has reduced anti-static capability.
J21
Actuator finish: Matte, frame finish: gloss.
Other colors, custom actuator markings
and legends available, consult Customer
Service Center.
LEVER WITH FRAME
NOTE: Internal o-ring actuator seal standard.
Actuators & frames available separately, see
page H-37. Hardware available seperately, see
Technical Data section of this catalog. N. J11
& J21 actuators available with C, Z & Z3 terminations.
PANEL MOUNTING
NOTE: This option has reduced anti-static capability.
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J1
ROCKER
OPTION
CODE
J2
ACTUATOR
COLOR
2
BLACK
3
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
LEVER
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–29
www.ittcannon.com
Rocker
NOTE: Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on
switches with panel mounting bracket. Internal
o-ring actuator seal standard. Actuators
available separately, see page H-37. Hardware
available seperately, see Technical Data section of this catalog. J1, J2 actuators available
with A, A3, AV2, AV3, V2-V61 terminations.
H
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J3
OPTION
CODE
ROCKER
ACTUATOR
COLOR
2
BLACK
3
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch
thick panel are supplied standard on switches
with panel mounting bracket. Internal o-ring
actuator seal standard. Actuators available
separately, see page H-37. Hardware available
seperately, see Technical Data section of this
catalog.
J50
ROCKER
J60
LEVER
J90
LEVER
J3 actuators available with AV2, AV3
& V2-V61 terminations. Some permissible actuator/termination combinations may lack clearance
between actuator and PC board, and care must
be exercised to accommodate this condition.
J50, J60 & J90 actuators available with
A, AV2, AV3, V2 – V61 terminations.
TERMINATIONS
Z
C
SOLDER LUG
PC THRU-HOLE
Rocker
PC MOUNTING
SPDT thru 3PDT
Not available with K, L, P, S, & R or M contact
materials. Available actuators, see page H-37.
SPDT thru 3PDT
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–30
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
Z3
QUICK CONNECT
SPDT thru 3PDT
A
Not available with K, L, P, S, & R or M contact materials. Available
actuators, see pages H-28 thru H-30. Mating quick connector
available; order part number 530100000, page H-38.
RIGHT ANGLE, PC THRU-HOLE
E101J1ABE2
Horizontal Actuation
SPDT
A3
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
NOTE: Not available with J3, J50, J60 and J90 actuators.
Available actuators, see pages H-28 thru H-30.
Terminal bend radii and lead-in manufacturing option.
A
NOTE: PC mounting pattern must clear
switch support leg.
RIGHT ANGLE, PC THRU-HOLE
E201J1ABE2
Horizontal Actuation
DPDT
A3
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
Rocker
NOTE: Not available with J3 actuator.
Available actuators, see pages H-28 and H-30.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–31
www.ittcannon.com
H
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
E301J1ABE2
Horizontal Actuation
3PDT
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
Actuator Shown In Pos. 1
AV3
SECTION A-A
E101J1AV2BE2
Vertical Actuation
SPDT
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
Rocker
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–32
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E201J1AV2BE2
Vertical Actuation
DPDT
AV3
SECTION A-A
Actuator Shown In Pos. 1
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E301J1AV2BE2
Vertical Actuation
3PDT
AV3
SECTION A-A
Actuator Shown In Pos. 1
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
Rocker
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–33
www.ittcannon.com
H
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V5
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
Actuator Shown In Pos. 1
E101J1V5BE2
Vertical Actuation
SPDT
SECTION A-A
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
V5
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
SECTION A-A
Actuator Shown In Pos. 1
E201J1V5BE2
Vertical Actuation
DPDT
Rocker
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–34
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E101J1__BE2
SPDT
OPTION
CODE
DIM ‘A’
V21
.555 (14, 10)
V6
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
NOTE: Available actuators, see pages H-28 and H-30.
V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E201J1__BE2
DPDT
OPTION
CODE
DIM ‘A’
V21
.555 (14, 10)
V6
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
NOTE: Available actuators, see pages H-28 and H-30.
V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
DIM ‘A’
V21
.555 (14, 10)
V7
.630 (16, 00)
V8
.953 (24, 21)
Rocker
E301J1__BE2
3PDT
NOTE: Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–35
www.ittcannon.com
H
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E101J1__BE2
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
V4
.630 (16,00)
NOTE: Available actuators, see pages H-28 and H-30.
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E201J1__BE2
DPDT
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
V4
.630 (16,00)
NOTE: Available actuators, see pages H-28 and H-30.
V4
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
Rocker
PC MOUNTING
E301J1__BE2
3PDT
OPTION
CODE
DIM ‘A’
V41
.630 (16,00)
NOTE: Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–36
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
CONTACT MATERIAL
OPTION
CODE
RoHS
RoHS
COMPLIANT * COMPATIBLE *
B
K
P
Q
M
S
G
L
R
YES
YES
NO
YES
YES
YES
YES
YES
NO
YES
YES
YES
YES
YES
NO
YES
YES
YES
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
GOLD 1
GOLD 1
LOW LEVEL/
TIN-LEAD 6
DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
MATTE-TIN 7
SILVER 5
POWER
E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @
250 V AC.
E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
TIN-LEAD 6
LOW LEVEL/DRY
MATTE-TIN 7
CIRCUIT OR POWER
E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR
7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @
125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
TIN-LEAD 6
SILVER 4,5
MATTE-TIN 7
GOLD 3
GOLD OVER
SILVER
2,3
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options when ordered with G, L, M, Q, S & R contact material.
B contact material standard with all terminations.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver
plate. Or copper alloy, silver plated.
K, L , M, P R & S contact materials not available with Z terminations.
6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
7 TERMINALS: Copper alloy, with matte-tin over nickel plate.
SEAL
E
EPOXY SEAL
AVAILABLE HARDWARE
J3 Actuator
J1, J11 Actuators
PART NO.
PART NO.
PART NO.
760502263 BLACK
760503000 RED
766602263 BLACK
766603000 RED
776A02263 BLACK
776A03000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
J50 Actuator
J60 Actuator
J90 Actuator
PART NO.
PART NO.
PART NO.
775A02263 BLACK
775A03000 RED
613802263 BLACK
598103000 RED
598002263 BLACK
598003000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Rocker
J2, J21 Actuators
NOTE: Additional nuts, screws and lockwashers available separately, see Technical
Data section of this catalog. Other colors available, consult Customer Service Center.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–37
www.ittcannon.com
H
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Fits Z3 Termination
female connector
Frame for J11, J21 Actuators
J50, J60 & J90 Actuators
MATTE
GLOSS
PART NO.
PART NO.
PART NO.
486702000
486802000 BLACK
PART NO.
764500746 BLACK ENAMEL
764601106 RETAINING SPRING
530100000
Material: Spring Steel
Material: Nylon
Finish: Matte or Gloss
Available in loose pieces.
NOTE: Additional nuts, screws and lockwashers available separately, see Technical
Data section of this catalog. Other colors available, consult Customer Service Center.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame.
Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
J1 & J2 Actuators
.047” (1,19) PANEL THK.
.062” (1,57) PANEL THK.
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
452902263
452903000
452702263
452703000
452802263
452803000
452602263 BLACK
452603000 RED
.047” (1,19) PANEL THK.
.062” (1,57) PANEL THK.
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432502263
432503000
432602263
432603000
432702263
432703000
432802263 BLACK
432803000 RED
J50, J60 & J90 Actuators
Rocker
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
.005 R. MAX.
(0,13) TYP.
.797 – .803
(20,24 – 20,40)
For part numbers
4325xxxxx, 4326xxxxx
.495 – .505
(12,57 – 12,83)
.005 R.
.495 – .505
(0,13)
(12,57 – 12,83)
MAX. TYP.
.595 – .605
(15,11 – 15,37)
For part numbers
4327xxxxx, 4328xxxxx
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.620 – .625
(15,75 – 15,88)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–38
www.ittcannon.com
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Panel Inserts
Will fit separate snap-in frames for
J50, J60, J90 actuators.
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
WITH HOLE FOR LED
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
894903000
476602000 BLACK
476603000 RED
Special colors, custom markings available, consult Customer Service Center.
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–39
www.ittcannon.com
H
Similar pages