ITF F1G8A Saw bandpass filter f1g8a Datasheet

SAW Bandpass Filter F1G8A
Features
PCS applications
Usable bandwidth 58.9 MHz
No impedance matching require for operation at 50 Ω
SMD Package 1.4 mm × 1.0 mm× 0.5 mm
Single-ended Operation
Package Dimensions
4
5
1
2
3
Side View
Top View
Bottom View
Pin Configuration
1
Input
4
Output
2, 3, 5
Ground
Maximum Ratings
Parameter
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-30
25
85
Storage Temperature Range
°C
-
-
-
Power Handling Capability
dBm
-
-
-
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
1/7
SAW Bandpass Filter F1G8A
Specifications
Fc =1880.0MHz
Terminating source impedance
:
Terminating load impedance
: single 50Ω
Center Frequency
Insertion Loss (1850.6~1909.4 MHz)
Amplitude Ripple (1850.6~1909.4 MHz)
Relative Attenuation
D.C. ~ 1570 MHz
1570 ~ 1580 MHz
1580 ~ 1770 MHz
1770 ~ 1829.4 MHz
1930.6 ~ 1989.4 MHz
1989.4 ~ 3000 MHz
VSWR (1850.6~1909.4 MHz)
single 50Ω
Minimum
Typical
Maximum
MHz
-
1880.0
-
dB
-
2.4
4.8
dB p-p
-
1.3
2.7
dB
40.0
35.0
30.0
20.0
17.0
12.0
48.0
46.0
54.0
39.0
39.0
22.0
-
-
-
2.0
2.5
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
2/7
SAW Bandpass Filter F1G8A
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
3/7
SAW Bandpass Filter F1G8A
Typical Performance
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
4/7
SAW Bandpass Filter F1G8A
S11, S22 VSWR
S11, S22 Smith Chart
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
5/7
SAW Bandpass Filter F1G8A
S21 Wide Band
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
6/7
SAW Bandpass Filter F1G8A
Packing Specification
1. Reeling Quantity : 3,000 pcs / reel (or 15,000 pcs / reel)
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
NCLL01-F1G8A
Rev. Date
2010-12-17
Rev.
PS01
7/7
Similar pages