2SC2482 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SC2482 High-Voltage Switching and Amplifier Applications Color TV Horizontal Driver Applications Color TV Chroma Output Applications • Unit: mm High breakdown voltage: VCEO = 300 V • Small collector output capacitance: Cob = 3.0 pF (typ.) • Recommended for chroma output and driver applications for line-operated TV horizontal. Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 300 V Collector-emitter voltage VCEO 300 V Emitter-base voltage VEBO 7 V Collector current IC 100 mA Base current IB 50 mA JEDEC Collector power dissipation PC 900 mW JEITA Junction temperature Tj 150 °C Tstg −55 to 150 °C Storage temperature range TOSHIBA TO-92MOD ― 2-5J1A Weight: 0.36 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SC2482 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 240 V, IE = 0 ― ― 1.0 μA Emitter cut-off current IEBO VEB = 7 V, IC = 0 ― ― 1.0 μA VCE = 10 V, IC = 4 mA 20 ― ― hFE (1) DC current gain hFE (2) VCE = 10 V, IC = 20 mA 30 ― 150 Collector-emitter saturation voltage VCE (sat) IC = 10 mA, IB = 1 mA ― ― 1.0 V Base-emitter saturation voltage VBE (sat) IC = 10 mA, IB = 1 mA ― ― 1.0 V VCE = 10 V, IC = 20 mA 50 ― ― MHz VCB = 20 V, IE = 0, f = 1 MHz ― 3.0 ― pF Transition frequency fT Collector output capacitance Cob Marking C2482 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SC2482 IC – VCE hFE – IC 120 1000 Common emitter Ta = 25°C 6 Collector current IC (mA) 4 3 300 2 DC current gain hFE 100 80 1 60 0.6 40 0.4 20 IB = 0.2 mA 0 0 Common emitter Ta = 25°C 500 VCE = 20 V 100 10 50 30 5 10 0 4 8 12 16 Collector-emitter voltage 20 5 0.3 24 1 VCE (V) hFE – IC Common emitter VCE = 10 V Collector-emitter saturation voltage VCE (sat) (V) DC current gain hFE (mA) VCE (sat) – IC 300 Ta = 100°C 100 50 −25 25 30 10 1 3 30 10 Collector current IC Common emitter Ta = 25°C 5 3 1 0.5 0.3 IC/IB = 10 5 0.1 0.05 0.3 100 2 1 (mA) 3 VCE (sat) – IC 100 (mA) VBE (sat) – IC 10 Common emitter IC/IB = 5 Common emitter IC/IB = 5 5 Base-emitter saturation voltage VBE (sat) (V) 5 30 10 Collector current IC 10 Collector-emitter saturation voltage VCE (sat) (V) 100 10 500 3 1 0.5 0.3 Ta = 100°C 0.1 Ta = 25°C 3 1 0.5 0.3 0.0 −25 0.05 0.3 30 10 Collector current IC 1000 5 0.3 3 1 3 25 30 10 Collector current IC 0.05 0.3 100 (mA) 1 3 Collector current IC 3 30 10 100 (mA) 2006-11-09 2SC2482 IC – VBE fT – IC Transition frequency fT (MHz) 100 Common emitter Collector current IC (mA) VCE = 10 V 80 60 Ta = 100°C 25 −25 40 1000 Common emitter Ta = 25°C 500 300 100 VCE = 20 V 50 5 30 10 20 10 0 0.2 0.4 0.6 0.8 Base-emitter voltage 1.0 5 0.3 1.2 VBE (V) 1 3 Collector current IC Cob – VCB 100 (mA) Safe Operating Area 300 IE = 0 300 μs* IC max (pulsed)* f = 1 MHz 50 Ta = 25°C (mA) 30 Collector current IC Collector output capacitance Cob (pF) 100 30 10 10 5 3 1 100 IC max (continuous) 1 ms 10 ms* 100 ms* 50 500 ms* 30 DC operation Ta = 25°C 10 *: Single nonrepetitive pulse 5 Ta = 25°C Curves must be derated linearly with 0.5 0.3 1 3 10 Collector-base voltage 30 increase in temperature. 100 2 3 VCB (V) 10 VCE max 30 Collector-emitter voltage 4 100 300 VCE (V) 2006-11-09 2SC2482 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-09