Gigabit Media Converters EL9100 Series Hardened 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Media Converter UL508 Overview The EL9100 Series provides media conversion between 10/100/1000BASE-T(X) and 1000BASE-SX-LX Fiber. Built specifically for mission-critical applications in harsh environments, the EL9100’s hardened design features high shock & vibration resistance, electrical noise immunity, wide operating temperature range from -40°C to 75°C, and ruggedized aluminum housing. With triple power inputs, link down alarming, Link-Fault-Pass-Through and a wide range of fiber connectivity options, the EL9100 is the ideal media converter for environments where connectivity is crucial. Spotlight • Gigabit Connectivity ◦◦ Auto 10/100/1000BASE-TX and 1000BASE-SX/LX/BX Ethernet transmission conversion ◦◦ 1000Mbps Full duplex, 10/100MBps Full/Half duplex ◦◦ Full wire-speed forwarding rate • UL508 Certification ◦◦ Specific design for industrial communication applications with UL508 safety certification • Wide Operating Temperature ◦◦ -40°C to 75°C wide operating temperature range design is suitable for installation in outdoor cabinet EL9100 Series 1 www.EtherWAN.com rev. A1.1 Hardware Specifications Technology Standards DIP Switch • IEEE802.3 10BASE-T • IEEE802.3u 100BASE-TX • IEEE802.3ab 1000BASE-T • IEEE802.3z 1000BASE-SX/1000BASE-LX • IEEE802.3x full duplex and flow control • No.1: LFPT on/off • No.2: Alarm for copper port on/off • No.3: Alarm for fiber port on/off • No.4: Auto-negotiation for fiber port on/off Alarm Contact Forward and Filtering Rate • Relay contact rating with current 1A @ 30VDC, 0.5A @ 120VAC • 1,488,100pps for 1000Mbps Processing Type Environment • Auto Negotiation • Half duplex back-pressure and IEEE802.3x full-duplex flow control • Auto-MDI/MDIX Operating Temperature • -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Power Storage Temperature • -40°C to 85°C (-40°F to 185°F) Input Voltage Ambient Relative Humidity • 12 to 48VDC (Terminal Block) • 12VDC (DC Jack) • 5% to 95% (non-condensing) Regulatory Approvals Power Consumption • 7.68W Max, 0.16A @ 48VDC ISO Protection • Manufactured in an ISO9001 facility • Overload current protection • Reverse polarity protection EMI FCC Part 15B, Class A EN61000-6-4 EN55022 EN61000-3-2 EN61000-3-3 Safety UL508 EMS EN61000-6-2 Mechanical Casing • Aluminum Case • IP30 Dimensions • 50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight • 0.8Kg (1.76lbs.) Installation • DIN-Rail (Top hat type 35mm), Panel, or Rack mounting • EN61000-4-2 (ESD Standards) • EN61000-4-3 (Radiated RFI Standards) • EN61000-4-4 (Burst Standards) • EN61000-4-5 (Surge Standards) • EN61000-4-6 (Induced RFI Standards) • EN61000-4-8 (Magnetic Field Standards) Interface Ethernet Port • 10/100/1000BASE-TX: 1 port • 1000BASE-SX/LX/BX: 1 port LED Indicators Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) IEC60068-2-27 Ea (Shock) FED STD 101C Method 5007.1 (Free fall w/ package) Industrial Compliance NEMA TS1 & TS2 • Per Unit: Power1 Power2 Power3 Fault LFPT • Per 10/100/1000BASE-TX Port: Link/ACT 100M 1000M Full-duplex/Collision • Per 1000SX/LX/BX Port: Link/Act EL9100 Series 2 www.EtherWAN.com rev. A1.1 Application Diagram Telecommunication Room A Telecommunication Room B Gigabit Switch Gigabit Switch Cat.5 Fiberoptic Ethernet Max. distance up to 120km 1000BASE-SX/LX/BX fiber EL9100 Series EL9100 Series Building-to-building application 2 er D 1 er w Po GND er w Po w Po - + 3 Dimensions - + 50mm (1.97”) 135mm (5.31”) Top Front Side Back 110mm (4.33”) Bottom EL9100 Series 3 www.EtherWAN.com rev. A1.1 Ordering Information Model EL9100-X1B 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter Gigabit Port Options (X) 3 1000BASE-SX(SC) - 550m 4 1000BASE-SX (SC) - 2Km 5 1000BASE-SX (ST) - 550m A 1000BASE-LX (SC) - 10Km B 1000BASE-LX (SC) - 20Km E 1000BASE-LX (SC) - 40Km (1310nm) H 1000BASE-LX (ST) - 10Km (1310nm) I 1000BASE-LX (ST) - 20Km (1310nm) R 1000BASE-BX (SC) WDM-TX:1310nm/RX:1550nm - 20Km S 1000BASE-BX (SC) WDM-TX:1550nm/RX: 1310nm - 20Km * DIN-Rail mounting kit included Optional Accessories DR-30-24 30W/1.5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block) DR-60-24 60W/2.5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block) DR-75-24 75W/3.2A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block) DR-120-24 120W/5A DIN-Rail 24VDC Industrial Power Supply (For Terminal Block) 41-136046-X 36W/3A 12VDC hardened power adapter with open wire in aluminum housing (For Terminal Block); (X) = 1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA 41-136044-X 36W/3A 12VDC hardened power adapter with latched DC jack in aluminum housing (For DC Jack); (X) = 1: US, 2: EU, 3: UK, 4: AU, 5: JP, 6: SA EL9100 Series 4 www.EtherWAN.com rev. A1.1