TOSHIBA TLYK37TP

TLYK37TP(K53MT1,F)
TOSHIBA LED Lamp
InGaAℓP Yellow Light Emission
TLYK37TP(K53MT1,F)
Panel Circuit Indicator
Unit: mm
•
φ5 mm package
•
InGaAℓP technology
•
Transparent lens
•
High intensity light emission
•
Excellent low current light output
•
Applications : Various types of information panels, backlightings, etc.
•
Stopper lead type is also available.
TLYK37T(F)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
IF (Note1)
50
mA
Reverse voltage
VR
4
V
Power dissipation
PD
125
mW
Operating temperature range
Topr
−40 to 100
°C
Storage temperature range
Tstg
−40 to 120
°C
JEDEC
―
JEITA
―
TOSHIBA
4-5BD1
Weight: 0.31 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note1: Forward current derating
IF – Ta
Allowable forward current
IF (mA)
80
60
40
20
0
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
Marktech
Optoelectronics
For part availability and ordering information please call Toll Free: 800.984.5337
Website: www.marktechopto.com | Email: [email protected]
1
2010-03-18
TLYK37TP(K53MT1,F)
Electrical and Optical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Typ.
Max
Unit
1.85
2.25
2.45
V
⎯
⎯
50
µA
3380
6800
19000
mcd
Forward voltage
VF
IF = 20 mA
Reverse current
IR
VR = 4 V
Luminous intensity
IV
IF = 20 mA
Peak emission wavelength
λP
IF = 20 mA
⎯
594
⎯
nm
Spectral line half width
∆λ
IF = 20 mA
⎯
13
⎯
nm
Dominant wavelength
λd
IF = 20 mA
587
590
593
nm
Note2:
(Note 2)
Min
(Note 2)
(Note 2)
Lamps are classified into the following ranks according to their dominant wavelength and luminous intensity,
forward voltage.
Each packing box includes single luminous Intensity class and single dominant wavelength class.
Dominant wavelength_ rank classification
Rank
Min
Max
Accuracy
2
587
590
±2nm
3
590
593
Unit
⎯
nm
IV _ rank classification
Rank
Min
Max
U
3380
6010
V
6010
10700
W
10700
19000
Unit
Accuracy
±22.5%
⎯
mcd
Forward voltage _ rank classification
Rank
Min
Max
A
1.85
2.05
B
2.05
2.25
C
2.25
2.45
Unit
V
Accuracy
±0.05V
⎯
Precaution
Please be careful of the followings
• Soldering temperature: 260°C max
Soldering time: 3 s max
(Soldering portion of lead: up to 1.6 mm from the body of the device)
•
If the lead is formed, the lead should be formed up to 1.6 mm from the body of the device without forming stress
to the resin. Soldering should be performed after lead forming.
•
This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure
that it will not be affected by this IR light.
2
2010-03-18
TLYK37TP(K53MT1,F)
IF – V F
100
IV – IF
30000
Ta = 25°C
Ta = 25°C
Luminous intensity IV (mcd)
(mA)
50
Forward current IF
30
10
5
3
1
1.6
1.8
2.2
2.0
2.4
Forward voltage VF
5000
3000
1000
500
300
100
2.8
2.6
10000
1
3
(V)
5
10
Forward current IF
30
50
100
640
660
(mA)
Relative Luminous Intensity
Wavelength
IV – Tc
1.0
10
IF = 20 mA
Ta = 25°C
5
Relative luminous intensity
Relative luminous intensity IV
0.8
3
1
0.5
0.3
0.1
−20
0
20
40
60
0.6
0.4
0.2
0
540
80
Case temperature Tc (°C)
560
580
600
620
Wavelength λ (nm)
Radiation Pattern
Ta = 25 °C
20°
10°
0°
10°
20°
30°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
80°
90°
0
0.2
0.4
0.6
0.8
90°
1.0
3
2010-03-18
TLYK37TP(K53MT1,F)
4
2010-03-18
TLYK37TP(K53MT1,F)
5
2010-03-18
TLYK37TP(K53MT1,F)
6
2010-03-18
TLYK37TP(K53MT1,F)
RESTRICTIONS ON PRODUCT USE
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the
information in this document, and related hardware, software and systems (collectively “Product”) without notice.
•
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
•
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware,
software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of
human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create
designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply
with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications,
the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA
Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for.
Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a)
determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the
applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application
circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment,
measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in
this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high
levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious
property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in
nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains,
ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety
devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use
Product for Unintended Use unless specifically permitted in this document.
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
•
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable laws or regulations.
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA
for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product.
No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
•
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS
OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO
LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR
INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF
OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR
IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF
INFORMATION, OR NONINFRINGEMENT.
•
Product may include products using GaAs (Gallium Arsenide). GaAs is harmful to humans if consumed or absorbed, whether
in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose
GaAs in Product.
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or
missile technology products (mass destruction weapons). Product and related software and technology may be controlled
under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and
re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export
laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of
Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or
losses occurring as a result of noncompliance with applicable laws and regulations.
7
2010-03-18