Rohm BU4S71G2 Single gate cmos logic ics gate> Datasheet

General-purpose CMOS Logic IC Series (BU4S,BU4000B Series)
Single Gate CMOS Logic ICs
<Logic Gate>
BU4S01G2, BU4S11G2, BU4SU69G2,BU4S71G2, BU4S81G2, BU4S584G2
No.09050EAT01
●Description
The BU4SxxxG2 are 1ch logic ICs encapsulated in an SSOP5 package.
They are interchangeable with the genaral-purpose BU4000B series.
●Features
1) Low power consumption
2) Surface mount package (SSOP5)
3) Broad operating supply voltage range: 3V-16V
4) High input impedance
5) High fan out
6) L-TTL2 and LS-TTL1 inputs can be driven directly.
7) Function compatible with BU4000B series (1ch).
●Applications
Suitable for use where low power consumption and a high degree of noise tolerance are required.
●Lineup
Single Gate CMOS Logic
Logic Gate
1
circuit
NOR
gate
BU4S01G2
(Single 2-input NOR gate)
1
circuit
NAND
gate
BU4S11G2
(Single 2-input NAND gate)
1
circuit
INV
gate
BU4SU69G2 (Single inverter gate)
1
circuit
OR
gate
BU4S71G2
(Single OR gate)
1
circuit
AND
gate
BU4S81G2
(Single 2-input AND gate)
1
circuit
INV
gate
BU4S584G2 (Single Schmitt trigger inverter)
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
1/16
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Absolute Maximum Ratings
Limit
Unit
BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2 BU4S81G2 BU4S584G2
VDD
-0.3 to 18
V
Iin
±10
mA
Topr
-40 to 85
℃
Tstg
-55 to 150
℃
VIN
-0.3 to VDD+0.3
V
Tjmax
150
℃
Parameter
Symbol
Power supply voltage
Supply current
Operating temperature
Storage temperature
Input voltage
Maximum junction temperature
●Recommended Operating Conditions
Parameter
Symbol
Operating power supply
Input voltage
VDD
VIN
Limit
Unit
BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2 BU4S81G2 BU4S584G2
3 to 16
V
0 to VDD
V
●Thermal Derating Curve
●Input / output Equivalent Circuits
1400
VDD
VDD
VDD
VDD
GND
GND
GND
GND
1200
Power Dissipation Pd〔mW〕
670[mV] BU4S Series
(*1)
1000
BU4S01G2
BU4S11G2
BU4SU69G2
BU4S71G2
BU4S81G2
BU4S584G2
800
600
<Input>
400
200
(*1)
5.3
85℃
0
0
25
50
75
100
125
Ambient temperature Ta〔℃〕
150
175
<Output>
UNIT
mW/℃
When used at Ta=25[°C] or above, values of above are reduced per 1[°C].
Power dissipation is the value for mounting 70[mm] x 70[mm] x 1.6[mm]
FR4 glass epoxy circuit board (copper foil area is 3% or less).
●Switching Characteristics
20[ns]
20[ns]
Description of symbols
(1) tPHL: Time up to 50% of rise time of input waveform
~ 50% of fall time of output waveform
(2) tPLH: Time up to 50% of fall time of input waveform
~ 50% of rise time of output waveform
(3) tTHL: Time up to 90% ~ 10% of fall time of output waveform
(4) tTLH: Time up to 10% ~ 90% of rise time of output waveform
90%
50%
Input
10%
①tPHL
②tPLH
90%
Output
50%
10%
④tTLH
③tTHL
20[ns]
20[ns]
90%
50%
Input
10%
②tpHL
①tpLH
90%
Description of symbols
(1) tPLH: Time up to 50% of rise time of input waveform
~50% of rise time of output waveform
(2) tPHL: Time up to 50% of fall time of input waveform
~ 50% of fall time of output waveform
(3) tTLH: Time up to 10% ~ 90% of rise time of output waveform
(4) tTHL: Time up to 90% ~ 10% of fall time of output waveform
50%
Output
10%
③tTLH
④tTHL
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2/16
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics(BU4S01G2)
DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
7.0
Input “H” voltage
VIH
11.0
-
Input “L” voltage
Input “H” current
Input “L” current
VIL
IIH
IIL
Output “H” voltage
VOH
Output “L” voltage
VOL
Output “H” current
Output “L” current
Static supply current
IOH
IOL
IDD
Unit
V
VDD[V]
5
10
15
-
-
1.5
3.0
-
-
4.0
4.95
9.95
14.95
-0.51
-2.1
-1.3
-
0.3
-0.3
0.05
0.05
0.05
-
-3.4
-
-
15
0.51
1.3
-
-
5
10
3.4
-
-
-
-
0.25
0.5
1.0
V
5
10
15
μA
μA
V
V
mA
mA
15
15
5
10
15
5
10
15
5
5
10
15
μA
5
10
15
Switching Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
70
5
Output rising time
tTLH
35
ns
10
30
15
70
5
Output falling time
tTHL
35
ns
10
30
15
85
5
tPLH
ns
40
10
30
15
Propagation delay time
85
5
tPHL
40
ns
10
30
15
Input capacitance
CIN
5
pF
5
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
3/16
Condition
VOUT=0.5[V]
VOUT=1.0[V]
VOUT=1.5[V]
|IOUT|<1[μA]
Fig.
No
1
2
3
VOUT=4.5[V]
VOUT=9.0[V]
VOUT=13.5[V]
|IOUT|<1[μA]
1
2
VIH=15[V]
VIL=0[V]
-
|IOUT|<1[μA]
VIN=VSS
4
|IOUT|<1[μA]
VIN=VDD
5
VOH=4.6[V]
VOH=2.5[V]
VOH=9.5[V]
VOH=13.5[V]
VIN=VSS
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VIN=VDD
VIN=VSS,VDD
3
4
5
-
Condition
Fig.
No
-
6
-
7
-
8
-
9
-
-
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics(BU4S11G2)
DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
Input “H” voltage
Input “L” voltage
Input “H” current
Input “L” current
VIH
VIL
IIH
IIL
Output “H” voltage
VOH
Output “L” voltage
VOL
Output “H” current
IOH
Output “L” current
IOL
Static supply current
IDD
Unit
VDD[V]
5
10
3.5
7.0
-
-
11.0
-
-
15
-
-
1.5
3.0
5
10
-
-
4.0
4.95
9.95
14.95
-0.51
-2.1
-1.3
-
0.3
-0.3
0.05
0.05
0.05
-
-3.4
-
-
15
0.51
1.3
-
-
5
10
3.4
-
-
-
-
0.25
0.5
1.0
V
V
15
μA
μA
V
V
mA
mA
15
15
5
10
15
5
10
15
5
5
10
15
μA
5
10
15
Switching Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
70
5
Output rising time
tTLH
35
ns
10
30
15
70
5
Output falling time
tTHL
35
ns
10
30
15
85
5
tPLH
ns
40
10
30
15
Propagation delay time
85
5
tPHL
40
ns
10
30
15
Input capacitance
CIN
5
pF
5
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
4/16
Condition
VOUT=0.5[V]
VOUT=1.0[V]
VOUT=1.5[V]
|IOUT|<1[μA]
VOUT=4.5[V]
VOUT=9.0[V]
VOUT=13.5[V]
|IOUT|<1[μA]
VIH=15[V]
VIL=0[V]
Fig.
No
10
11
12
10
11
12
-
|IOUT|<1[μA]
VIN=VSS
13
|IOUT|<1[μA]
VIN=VDD
14
VOH=4.6[V]
VOH=2.5[V]
VOH=9.5[V]
VOH=13.5[V]
VIN=VSS
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VIN=VDD
VIN=VSS,VDD
13
14
-
Condition
Fig.
No
-
15
-
16
-
17
-
18
-
-
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics(BU4SU69G2)
DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
4.0
8.0
Input “H” voltage
VIH
Input “L” voltage
Input “H” current
Input “L” current
VIL
IIH
IIL
Output “H” voltage
VOH
Output “L” voltage
VOL
Output “H” current
Output “L” current
Static supply current
IOH
IOL
IDD
Unit
V
VDD[V]
5
10
12.0
-
-
15
-
-
1.0
2.0
5
10
-
-
3.0
4.95
9.95
14.95
-0.51
-2.1
-1.3
-
0.3
-0.3
0.05
0.05
0.05
-
-3.4
-
-
15
0.51
1.3
-
-
5
10
3.4
-
-
-
-
0.25
0.5
1.0
V
15
μA
μA
V
V
mA
mA
15
15
5
10
15
5
10
15
5
5
10
15
μA
5
10
15
Switching Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
70
5
Output rising time
tTLH
35
ns
10
30
15
70
5
Output falling time
tTHL
35
ns
10
30
15
55
5
tPLH
ns
30
10
25
15
Propagation delay time
55
5
tPHL
30
ns
10
25
15
Input capacitance
CIN
5
pF
5
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
5/16
Condition
Fig.
No
VOUT=0.5[V]
VOUT=1.0[V]
VOUT=1.5[V]
|IOUT|<1[μA]
19
20
VOUT=4.5[V]
VOUT=9.0[V]
VOUT=13.5[V]
|IOUT|<1[μA]
19
20
VIH=15[V]
VIL=0[V]
21
21
-
|IOUT|<1[μA]
VIN=VSS
22
|IOUT|<1[μA]
VIN=VDD
23
VOH=4.6[V]
VOH=2.5[V]
VOH=9.5[V]
VOH=13.5[V]
VIN=VSS
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VIN=VDD
VIN=VSS,VDD
22
23
-
Condition
Fig.
No
-
24
-
25
-
26
-
27
-
-
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics(BU4S71G2)
DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
4.95
Output “H” voltage
VOH
9.95
14.95
0.05
Output “L” voltage
VOL
0.05
0.05
-0.51
-2.1
Output “H” current
IOH
-1.3
-3.4
0.51
Output “L” current
IOL
1.3
3.4
0.25
Static supply current
IDD
0.5
1.0
Unit
V
V
μA
μA
V
V
mA
mA
μA
VDD[V]
5
10
15
5
10
15
18
18
5
10
15
5
10
15
5
5
10
15
5
10
15
5
10
15
Switching Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
70
5
Output rising time
tTLH
35
ns
10
30
15
70
5
Output falling time
tTHL
35
ns
10
30
15
90
5
tPLH
ns
45
10
30
15
Propagation delay time
90
5
tPHL
45
ns
10
30
15
Input capacitance
CIN
5
pF
5
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
6/16
Condition
|IOUT|<1[μA]
|IOUT|<1[μA]
VIH=18[V]
VIL=0[V]
Fig.
No
28
29
30
28
29
30
-
|IOUT|<1[μA]
VIN=VSS or VDD
31
|IOUT|<1[μA]
VIN=VSS
32
VOH=4.6[V]
VOH=2.5[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VIN=VSS,VDD
31
32
-
Condition
Fig.
No
-
33
-
34
-
35
-
36
-
-
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics(BU4S81G2)
DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
3.5
Input “H” voltage
VIH
7.0
11.0
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
4.95
Output “H” voltage
VOH
9.95
14.95
0.05
Output “L” voltage
VOL
0.05
0.05
-0.51
-2.1
Output “H” current
IOH
-1.3
-3.4
0.51
Output “L” current
IOL
1.3
3.4
0.25
Static supply current
IDD
0.5
1.0
Unit
V
V
μA
μA
V
V
mA
mA
μA
VDD[V]
5
10
15
5
10
15
18
18
5
10
15
5
10
15
5
5
10
15
5
10
15
5
10
15
Switching Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
-
70
35
30
70
35
30
90
-
-
45
-
-
30
-
15
-
90
-
5
tPHL
-
45
-
CIN
-
30
5
-
Output rising time
tTLH
Output falling time
tTHL
tPLH
Propagation delay time
Input capacitance
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
7/16
ns
ns
ns
5
10
15
5
10
15
5
10
Condition
|IOUT|<1[μA]
|IOUT|<1[μA]
VIH=18[V]
VIL=0[V]
Fig.
No
37
38
39
37
38
39
-
|IOUT|<1[μA]
VIN=VSS or VDD
40
|IOUT|<1[μA]
VIN=VSS
41
VOH=4.6[V]
VOH=2.5[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
VIN=VSS,VDD
40
41
-
Condition
Fig.
No
-
42
-
43
-
44
ns
10
-
45
pF
15
5
-
-
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics(BU4S584G2)
DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃])
Standard Value
Parameter
Symbol
MIN
TYP
MAX
2.6
3.5
Input “H” voltage
VIH
7.0
11.0
0.4
1.5
Input “L” voltage
VIL
3.0
4.0
Input “H” current
IIH
0.3
Input “L” current
IIL
-0.3
2.95
4.95
Output “H” voltage
VOH
9.95
14.95
0.05
0.05
Output “L” voltage
VOL
0.05
0.05
-0.1
-0.51
Output “H” current
IOH
-2.1
-1.3
-3.4
0.1
0.51
Output “L” current
IOL
1.3
3.4
0.1
0.5
0.15
0.6
Hysteresis voltage
VH
0.25
1.0
0.40
1.5
0.2
0.25
Supply current
IDD
0.5
1.0
Unit
V
V
μA
μA
V
V
mA
mA
V
μA
VDD[V]
3
5
10
15
3
5
10
15
15
15
3
5
10
15
3
5
10
15
3
5
5
10
15
3
5
10
15
3
5
10
15
3
5
10
15
Switching Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃],CL=50[pF])
Standard Value
Parameter
Symbol
Unit
MIN
TYP
MAX
VDD[V]
140
3
70
5
Output rising time
tTLH
ns
35
10
30
15
140
3
70
5
Output falling time
tTHL
ns
35
10
30
15
230
3
125
5
tPLH
ns
60
10
50
15
Propagation delay time
230
3
125
5
tPHL
ns
60
10
50
15
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
8/16
Condition
-
Fig.
No
46
47
48
-
46
47
48
VIH=15[V]
VIL=0[V]
-
|IOUT|<1[μA]
VIN=VSS
49
|IOUT|<1[μA]
VIN=VDD
50
VOH=2.7[V]
VOH=4.6 [V]
VOH=2.5[V]
VOH=9.5[V]
VOH=13.5[V]
VOL=0.3[V]
VOL=0.4[V]
VOL=0.5[V]
VOL=1.5[V]
-
VIN=VSS or VDD
49
50
-
-
Condition
Fig.
No
-
51
-
52
-
53
-
54
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics Curves(BU4S01G2)
6
20
12
[BU4S10G2]
[BU4S10G2]
5
[BU4S01G2]
10
3
85[℃]
25[℃]
-40[℃]
2
8
85[℃]
25[℃]
Output Voltage [V]
Output Voltage [V]
Output Voltage [V]
15
4
-40[℃]
6
4
85[℃]
25[℃] -40[℃]
10
5
1
2
0
0
0
0
1
2
3
4
5
0
2
4
Input Voltage [V]
6
8
Fig.2
Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
50
20
VDD=5[V]
-40[℃]
25[℃]
10
40
85[℃]
30
20
VDD=10[V]
-40[℃]
25[℃]
10
5
10
15
20
0
5
Output Voltage [V]
10
-50
20
100
VDD=5[V]
VDD=10[V]
0
25
75
100
200
150
VDD=3 [V]
100
VDD=5 [V]
VDD=10[V]
50
200
VDD=3 [V]
150
100
VDD=5 [V]
50
VDD=10[V]
VDD=16[V]
0
-50
Fig.7
Output falling time tTHL
100
[BU4S01G2]
Operating Tempretrue Range
VDD=16[V]
50
75
Fig.6
Output rising time tTLH
Operating Tempretrue Range
0
Ambient Temperature [℃]
50
250
VDD=16[V]
0
25
-25
Ambient Temperature [℃]
Propagation Delay Time[ns]
Propagation Delay Time[ns]
VDD=3[V]
0
VDD=10[V]
[BU4S10G2]
Operating Tempretrue Range
-25
VDD=5[V]
VDD=16[V]
250
-50
100
0
15
[BU4S10G2]
50
VDD=3[V]
Fig.5
Output sink current-voltage characteristics
250
150
150
Output Voltage [V]
Fig.4
Output source current-voltage characteristics
200
Operating Voltage Range
50
85[℃]
-40[℃]
25[℃]
VDD=5[V]
85[℃]
0
0
200
-40[℃]
25[℃]
85[℃]
0
[BU4S01G2]
VDD=15[V]
Output Rise Time[ns]
Output Sink Current [mA]
Output Source Current [mA]
VDD=10[V]
-40[℃]
25[℃]
85[℃]
15
250
[BU4S10G2]
VDD=15[V]
-40[℃]
25[℃]
85[℃]
30
10
Fig.3
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
50
[BU4S10G2]
40
5
Input Voltage [V]
Input Voltage [V]
Fig.1
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
Output Fall Time[ns]
0
10
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.8
Propagation delay time tPLH
Fig.9
Propagation delay time tPHL
●Pinout Diagram ・Pin Description・Input / Output Table
VDD
Y
5
4
1
2
3
A
B
VSS
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
PIN
1
2
3
4
5
PIN NAME
A
B
VSS
Y
VDD
I/O
I
I
O
-
9/16
PIN FUNCTION
Input
Input
Power supply(-)
Output
Power supply(+)
A
L
L
H
H
B
L
H
L
H
Y
H
L
L
L
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Characteristics Curves(BU4S11G2)
6
12
20
[BU4S11G2]
[BU4S11G2]
[BU4S11G2]
85[℃]
5
25[℃]
-40[℃]
10
25[℃]
-40[℃]
3
2
8
85[℃]
25[℃]
Output Voltage [V]
85[℃]
Output Voltage [V]
Output Voltage [V]
15
4
-40[℃]
6
4
10
5
1
2
0
0
1
2
3
4
0
5
0
5
Input Voltage [V]
Output Sink Current [mA]
VDD=10[V]
-40[℃]
25[℃]
85[℃]
20
VDD=5[V]
-40[℃]
25[℃]
10
85[℃]
30
20
VDD=10[V]
-40[℃]
25[℃]
10
0
85[℃]
-40[℃]
25[℃] VDD=5[V]
85[℃]
0
5
10
15
20
0
5
Output Voltage [V]
Propagation Delay Time[ns]
VDD=3[V]
150
VDD=5[V]
VDD=10[V]
-50
-25
0
25
VDD=10[V]
VDD=16[V]
0
15
20
-50
-25
75
100
250
VDD=3[V]
200
150
VDD=5[V]
100
VDD=10[V]
50
75
100
Fig.15
Output rising time tTLH
[BU4S11G2]
Operating Temperature Range
250
VDD=3[V]
200
150
100
VDD=5[V]
50
VDD=10[V]
VDD=16[V]
-25
0
25
50
75
100
-50
-25
Ambient Temperature [℃]
Fig.16
Output falling time tTHL
50
0
-50
Ambient Temperature [℃]
25
300
0
50
0
Ambient Temperature [℃]
VDD=16[V]
VDD=16[V]
0
VDD=5[V]
100
[BU4S11G2]
Operating Temperature Range
250
50
VDD=3[V]
150
50
300
[BU4S11G2]
Operating Temperature Range
100
Operating Voltage Range
200
Fig.14
Output sink current-voltage characteristics
300
200
[BU4S11G2]
Output Voltage [V]
Fig.13
Output source current-voltage characteristics
Output Fall Time[ns]
10
15
250
VDD=15[V]
-40[℃]
25[℃]
40
10
300
[BU4S11G2]
85[℃]
0
5
Fig.12
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
Propagation Delay Time[ns]
Output Source Current [mA]
50
85[℃]
30
0
Input Voltage [V]
Fig.11
Output voltage-Input voltage haracteristics
(VDD=10[V] / VSS=0[V])
[BU4S11G2]
VDD=15[V]
-40[℃]
25[℃]
40
15
Input Voltage [V]
Fig.10
Output voltage-Input voltage characteristics
(VDD=5[V ]/ VSS=0[V])
50
10
Output Rise Time[ns]
0
Fig.17
Propagation delay time tPLH
0
25
50
75
100
Ambient Temperature [℃]
Fig.18
Propagation delay time tPHL
●Pinout Diagram ・Pin Description・Input / Output Table
VDD
Y
5
4
1
2
3
A
B
VSS
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
PIN
1
2
3
4
5
PIN NAME
A
B
VSS
Y
VDD
I/O
I
I
O
-
10/16
PIN FUNCTION
Input
Input
Power supply(-)
Output
Power supply(+)
A
L
L
H
H
B
L
H
L
H
Y
H
H
H
L
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Charasteristics Curves (BU4SU69G2)
6
12
20
[BU4S69G2]
25[℃]
10
-40[℃]
85[℃]
25[℃]
[BU4S69G2]
-40[℃]
85[℃]
15
4
3
2
Output Voltage [V]
85[℃]
Output Voltage [V]
Output Voltage [V]
5
[BU4S69G2]
8
6
4
25[℃]
-40[℃]
10
5
2
1
0
0
0
1
2
3
4
0
0
5
2
4
8
Fig.19
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
0
VDD=10[V]
-40[℃]
25[℃]
20
85[℃]
VDD=5[V]
-40[℃]
25[℃]
10
40
VDD=15[V]
-40[℃]
25[℃]
30
VDD=10[V]
-40[℃]
25[℃]
20
VDD=5[V]
-40[℃]
10
10
15
20
0
5
Output Voltage [V]
10
15
20
-50
-25
50
75
100
Fig.24
Output rising time tTLH
250
VDD=5[V]
VDD=10[V]
Operating Temperature Range
Propagation Delay Time[ns]
Propagation Delay Time[ns]
100
150
VDD=3[V]
100
VDD=5[V]
50
VDD=10[V]
VDD=16[V]
Operating Temperature Range
[BU4S69G2]
200
VDD=3[V]
150
100
VDD=5[V]
50
VDD=10[V]
VDD=16[V]
0
0
75
25
Operating Temperature Range
150
50
0
Ambient Temperature [℃]
[BU4S69G2]
VDD=3[V]
25
VDD=10[V]
VDD=16[V]
200
0
50
0
[BU4S69G2]
-25
VDD=5[V]
Fig.23
Output sink current-voltage characteristics
200
-50
100
Output Voltage [V]
Fig.22
Output source current-voltage characteristics
50
VDD=3[V]
150
25[℃]
85[℃]
0
5
85[℃]
85[℃]
85[℃]
0
0
[BU4S69G2]
Operating Temperature Range
Output Rise Time[ns]
Output Sink Current [mA]
30
15
200
[BU4S69G2]
85[℃]
10
Fig.21
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
50
[BU4S69G2]
VDD=15[V]
-40[℃]
25[℃]
40
5
Input Voltage [V]
Fig.20
Output voltage-Input voltagecharacteristics
(VDD=10[V] / VSS=0[V])
50
Output Fall Time[ns]
10
Input Voltage [V]
Input Voltage [V]
Output Source Current [mA]
6
100
VDD=16[V]
0
-50
-25
Ambient Temperature [℃]
0
25
50
75
100
-50
-25
Ambient Temperature [℃]
Fig.25
Output falling time tTHL
Fig.26
Propagation delay time tPLH
0
25
50
75
100
Ambient Temperature [℃]
Fig.27
Propagation delay time tPHL
●Pinout Diagram・Pin Description・Input / Output Table
VDD
Y
5
4
1
2
3
NC
A
VSS
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
PIN
1
2
3
4
5
PIN NAME
NC
A
VSS
Y
VDD
I/O
I
O
-
11/16
PIN FUNCTION
NC
Input
Power supply(-)
Output
Power supply(+)
A
L
H
Y
H
L
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Charasteristics Curves (BU4S71G2)
6
12
[BU4S71G2]
20
[BU4S71G2]
[BU4S71G2]
10
5
85[℃]
25[℃]
-40[℃]
4
85[℃]
3
25[℃] -40[℃]
2
85[℃] 25[℃] -40[℃]
8
6
4
Output Voltage [V]
Output Voltage [V]
Output Voltage [V]
15
10
5
2
1
0
0
0
1
2
3
4
0
0
5
2
4
6
8
10
50
85[℃]
VDD=10[V]
-40[℃]
25[℃]
85[℃]
VDD=5[V]
-40[℃]
25[℃]
10
40
-40[℃]
25[℃]
85[℃]
30
VDD=10[V]
-40[℃]
25[℃]
85[℃]
VDD=5[V]
10
85[℃]
0
0
5
10
15
20
0
5
Output Voltage [V]
Propagation Delay Time[ns]
Output Fall Time[ns]
VDD=3[V]
150
100
VDD=5[V]
50
VDD=10[V]
-50
-25
0
25
50
100
VDD=5[V]
VDD=10[V]
VDD=16[V]
10
15
-50
20
-25
0
250
150
VDD=5[V]
VDD=10[V]
50
200
150
VDD=3[V]
100
VDD=5[V]
50
VDD=10[V]
VDD=16[V]
0
75
100
100
Operating Temperature Range
VDD=3[V]
100
75
[BU4S71G2]
Operating Temperature Range
200
50
Fig.33
Rising time tTLH
[BU4S71G2]
250
25
Ambient Temperature[℃]
VDD=16[V]
VDD=16[V]
0
150
0
300
Operating Temperature Range
200
VDD=3[V]
Fig.32
Output sink current-voltage characteristics
[BU4S71G2]
250
200
Output Voltage [V]
Fig.31
Output source current-voltage characteristics
300
Operating Temperature Range
50
-40[℃]
25[℃]
85[℃]
0
[BU4S71G2]
250
VDD=15[V]
20
15
300
[BU4S71G2]
Propagation Delay Time[ns]
20
10
Fig.30
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
Output Rise Time [ns]
[BU4S71G2]
VDD=15[V]
-40[℃]
25[℃]
Output Sink Current [mA]
Output Source Current [mA]
50
30
5
Input Voltage [V]
Fig.29
Fig.28
Output voltage-Input voltage characteristics Output voltage-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
(VDD=5[V]/ VSS=0[V])
40
0
Input Voltage [V]
Input Voltage [V]
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.34
falling time tTHL
Fig.35
Propagation delay time tPLH
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.36
Propagation delay time tPHL
●Pinout Diagram・Pin Description・Input / Output Table
VDD
Y
5
4
1
2
3
A
B
VSS
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
PIN
1
2
3
4
5
PIN NAME
A
B
VSS
Y
VDD
I/O
I
I
O
-
12/16
PIN FUNCTION
Input
Input
Power supply(-)
Output
Power supply(+)
A
L
L
H
H
B
L
H
L
H
Y
L
H
H
H
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Charasteristics Curves(BU4S81G2)
6
12
[BU4S81G2]
5
20
[BU4S81G2]
[BU4S81G2]
10
85[℃]
25[℃]
-40[℃]
4
85[℃] 25[℃] -40[℃]
3
2
8
85[℃] 25[℃] -40[℃]
6
4
Output Voltage [V]
Output Voltage [V]
Output Voltage [V]
15
10
5
1
2
0
0
1
2
3
4
5
0
0
2
4
Input Voltage [V]
50
Output Sink Current [mA]
Output Source Current [mA]
85[℃]
VDD=10[V]
-40[℃]
25[℃]
85[℃]
VDD=5[V]
-40[℃]
25[℃]
10
40
10
15
[BU4S81G2]
200
85[℃]
30
VDD=10[V]
-40[℃]
25[℃]
85[℃]
VDD=5[V]
10
10
15
20
Output Voltage [V]
Fig.40
Output source current-voltage characteristics
Fig.41
Output sink current-voltage characteristics
100
VDD=5[V]
VDD=10[V]
200
VDD=3[V]
150
100
VDD=5[V]
50
VDD=10[V]
VDD=16[V]
0
25
50
75
100
75
100
250
VDD=3[V]
200
150
VDD=5[V]
100
VDD=10[V]
50
VDD=16[V]
0
-25
50
[BU4S81G2]
Operating Temperature Range
VDD=16[V]
0
25
300
Propagation Delay Time[ns]
Propagation Delay Time[ns]
Output Fall Time[ns]
VDD=3[V]
150
0
Fig.42
Output rising time tTLH
Operating Temperature Range
200
-25
Ambient Temperature [℃]
[BU4S81G2]
Operating Temperature Range
-50
VDD=10[V]
-50
250
[BU4S81G2]
50
VDD=5[V]
0
Output Voltage [V]
250
100
VDD=16[V]
85[℃]
5
VDD=3[V]
150
50
-40[℃]
25[℃]
0
20
15
Operating Temperature Range
-40[℃]
25[℃]
20
10
250
VDD=15[V]
0
5
5
Fig.39
Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
[BU4S81G2]
85[℃]
0
0
0
Input Voltage [V]
50
-40[℃]
25[℃]
20
10
Fig.38
Output voltae-Input voltage characteristics
(VDD=10[V] / VSS=0[V])
[BU4S81G2]
VDD=15[V]
30
8
Input Voltage [V]
Fig.37
Output voltage-Iput voltage characteristics
(VDD=5[V] / VSS=0[V])
40
6
Output Rise Time[ns]
0
0
-50
-25
0
25
50
75
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.43
Output falling time tTHL
Fig.44
Propagation delay time tPLH
100
-50
-25
0
25
50
75
100
Ambient Temperature [℃]
Fig.45
Propagation delay time tPHL
●Pinout Diagram・Pin Description・Input / Output Table
VDD
Y
5
4
1
2
3
A
B
VSS
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
PIN
1
2
3
4
5
PIN NAME
NC
A
VSS
Y
VDD
I/O
I
O
-
13/16
PIN FUNCTION
Input
Input
Power supply(-)
Output
Power supply(+)
A
L
L
H
H
B
L
H
L
H
Y
L
L
L
H
2009.06 - Rev.A
Technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
●Electrical Charasteristics Curves(BU4S584G2)
6
12
[BU4S584G2]
20
[BU4S584G2]
[BU4S584G2]
10
5
85[℃] 25[℃] -40[℃]
3
2
8
Output Voltage [V]
Output Voltage [V]
Output Voltage [V]
15
4
85[℃] 25[℃] -40[℃]
6
4
85[℃] 25[℃] -40[℃]
10
5
2
1
0
0
2
3
4
0
0
5
2
4
Fig.46
Output voltage-Input voltage characteristics
(VDD=5[V] / VSS=0[V])
50
VDD=15[V]
-40[℃]
25[℃]
Output Sink Current [mA]
Output Source Current [mA]
[BU4S584G2]
85[℃]
VDD=10[V]
-40[℃]
25[℃]
85[℃]
20
VDD=5[V]
-40[℃]
25[℃]
10
0
40
10
15
85[℃]
30
VDD=10[V]
-40[℃]
25[℃]
20
85[℃]
VDD=5[V]
10
5
Propagation Delay Time[ns]
Output Fall Time[ns]
100
VDD=5[V]
VDD=10[V]
VDD=10[V]
10
15
20
-50
-25
50
75
100
150
VDD=5[V]
VDD=10[V]
Ambient Temperature [℃]
-25
0
25
50
VDD=3[V]
200
150
100
VDD=5[V]
50
VDD=10[V]
75
100
VDD=16[V]
-50
-25
Fig.53
Propagation delay time tPLH
0
25
50
75
100
Ambient Temperature [℃]
Ambient Temperature [℃]
Fig.52
Output falling time tTHL
100
[BU4S584G2]
0
-50
75
Operating Temperature Range
250
VDD=3[V]
0
25
50
300
200
50
25
Fig.51
Output rising time tTLH
[BU4S584G2]
100
0
Ambient Temperature [℃]
VDD=16[V]
VDD=16[V]
0
VDD=5[V]
VDD=16[V]
Operating Temperature Range
150
-25
100
0
250
[BU4S584G2]
-50
VDD=3[V]
Fig.50
Output sink current-voltage characteristics
Operating Temperature Range
0
150
Output Voltage [V]
VDD=3[V]
15
[BU4S584G2]
50
85[℃]
0
Fig.49
Output source current-voltage characteristics
50
250
-40[℃]
25[℃]
20
200
10
200
-40[℃]
25[℃]
Output Voltage [V]
250
5
Input Voltage [V]
VDD=15[V]
0
5
0
[BU4S584G2]
85[℃]
0
10
Fig.48
Fig.47
Output voltage-Input voltage characteristics Output voltage-Input voltage characteristics
(VDD=15[V] / VSS=0[V])
(VDD=10[V] / VSS=0[V])
50
30
8
Input Voltage [V]
Input Voltage [V]
40
6
Output Rise Time[ns]
1
Output Rise Time[ns]
0
Fig.54
Propagation delay time tPHL
●Pinout Diagram・Pin Description・Input / Output Table
VDD
Y
5
4
1
2
3
NC
A
VSS
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
PIN
1
2
3
4
5
PIN NAME
NC
A
VSS
Y
VDD
I/O
I
O
-
14/16
PIN FUNCTION
NC
Input
Power supply(-)
Output
Power supply(+)
A
L
H
Y
H
L
2009.06 - Rev.A
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
Technical Note
●Notes for use
1. Absolute Maximum ratings
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down the devices, thus making impossible to identify breaking mode, such as short circuit or an open circuit. If any
over rated values will expect to exceed the absolute maximum ratings, consider adding circuit protection devices, such as
fuses.
2. Connecting the power supply connector backward
Connecting of the power supply in reverse polarity can damage IC. Take precautions when connecting the power supply
lines. An external direction diode can be added.
3. Power supply lines
Design PCB layout pattern to provide low impedance GND and supply lines. To obtain a low noise ground and supply line,
separate the ground section and supply lines of the digital and analog blocks. Furthermore, for all power supply terminals to
ICs, connect a capacitor between the power supply and the GND terminal. When applying electrolytic capacitors in the
circuit, not that capacitance characteristic values are reduced at low temperatures.
4. GND voltage
The potential of GND pin must be minimum potential in all operating conditions.
5. Thermal design
Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions.
6. Inter-pin shorts and mounting errors
Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any
connection error or if pins are shorted together.
7. Actions in strong electromagnetic field
Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to
malfunction.
8. Testing on application boards
When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress.
Always discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or
removing it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic measure.
Use similar precaution when transporting or storing the IC.
9. Ground Wiring Pattern
When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns, placing
a signal ground point at the ground potential of application so that the pattern wiring resistance and voltage variations
caused by large currents do not cause variations in the small signal ground voltage. Be careful not to change the GND wiring
pattern of any external components, either.
10. Unused input terminals
Connect all unused input terminals to VDD or VSS in order to prevent excessive current or oscillation.
Insertion of a resistor (100kΩ approx.) is also recommended.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
15/16
2009.06 - Rev.A
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2
Technical Note
●Ordering part number
B
U
4
Part No.
S
0
1
G
Part No.
4S01 , 4S11
4SU69 , 4S71
4S81 , 4S584
2
-
T
Package
G2: SSOP5
R
Packaging and forming specification
TR: Embossed tape and reel
SSOP5
5
4
1
2
0.2Min.
+0.2
1.6 −0.1
2.8±0.2
<Tape and Reel information>
+6°
4° −4°
2.9±0.2
3
Tape
Embossed carrier tape
Quantity
3000pcs
Direction
of feed
TR
The direction is the 1pin of product is at the upper right when you hold
( reel on the left hand and you pull out the tape on the right hand
1pin
+0.05
0.13 −0.03
0.05±0.05
1.1±0.05
1.25Max.
)
+0.05
0.42 −0.04
0.95
0.1
Direction of feed
(Unit : mm)
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
Reel
16/16
∗ Order quantity needs to be multiple of the minimum quantity.
2009.06 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A
Similar pages