EPCOS B43524K4687M000 Aluminum electrolytic capacitor Datasheet

Aluminum electrolytic capacitors
Capacitors with 4-pin snap-in terminals and solder
pins
Series/Type:
B43514, B43524
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Capacitors with 4-pin snap-in terminals and solder pins
B43514, B43524
Extended temperature range 105 °C
Long-life grade capacitors
Applications
Frequency converters
Professional switch-mode power supplies
Features
Long useful life
High reliability and high ripple current capability
High volumetric efficiency
Many different case sizes
Pinning ensures correct insertion
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB (B43514
only)
Overload protection by safety vent in case
Terminals
4-pin snap-in terminals (6.3 mm and 4.5 mm length)
Solder pin mounting on printed circuit boards, pins fit
standardized spacings on PCB
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 19
B43514
B43524
B43514, B43524
Extended temperature range 105 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
350 ... 450 V DC
1.1 VR
390 ... 2200 µF
±20% M
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Useful life
105 °C; VR; IAC,R
85 °C; VR; IAC,max
40 °C; VR; 2.2 IAC,R
Voltage endurance test
105 °C; VR
Vibration resistance
test
Characteristics at low
temperature
Approx. 20 nH
> 3000 h
> 7000 h
> 200000 h
2000 h
Requirements:
∆C/C
≤ ±30% of initial value
ESR
≤ 3 times initial specified limit
Ileak
≤ initial specified limit
Post test requirements:
≤ ±10% of initial value
∆C/C
≤ 1.3 times initial specified limit
ESR
≤ initial specified limit
Ileak
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.35 mm, frequency range 10 ... 55 Hz,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Max. impedance ratio
at 100 Hz
VR
≤ 400 V
Z -25 °C / Z 20 °C 4
Z -40 °C / Z 20 °C 7
> 400 V
7
14
IEC climatic category
To IEC 60068-1:
VR ≤ 400 V DC: 40/105/56 (40 °C/+105 °C/56 days damp heat test)
VR > 400 V DC: 25/105/56 (25 °C/+105 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
40 °C to +105 °C but the impedance at 40 °C should be taken into
consideration.
Detail specification
Sectional specification
Similar to CECC 30301-808
IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 19
B43514, B43524
Extended temperature range 105 °C
Dimensional drawings
B43514, 4-pin snap-in terminals, PVC insulation
Dimensions
(mm)
d +1 l ±2
Approx.
weight (g)
Packing
units (pcs.)
35
35
35
35
50
60
70
80
63
76
88
101
60
36
36
36
40
40
40
40
40
40
40
40
50
60
70
80
90
100
71
89
107
125
143
161
178
33
33
33
33
33
33
33
45
45
45
45
45
45
45
40
50
60
70
80
90
100
90
113
136
158
181
204
226
28
28
28
28
28
28
28
Standard snap-in terminals:
length (6.3 ±1) mm.
Also available with length of (4.5 1) mm.
All pin holes must be drilled into the
PC-board, since the unconnected pins serve
as mountings. These pins must be soldered
to isolated pads or pads with the same
potential as the negative pole.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 19
B43514, B43524
Extended temperature range 105 °C
B43514, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side
Dimensions
Approx.
(mm)
weight (g)
d +1.4 l +2.2/2
Packing
units (pcs.)
35
35
35
35
50
60
70
80
63
76
88
101
60
36
36
36
40
40
40
40
40
40
40
40
50
60
70
80
90
100
71
89
107
125
143
161
178
33
33
33
33
33
33
33
45
45
45
45
45
45
45
40
50
60
70
80
90
100
90
113
136
158
181
204
226
28
28
28
28
28
28
28
Standard snap-in terminals:
length 6.3 +1/1.4 mm. Also available with length
of 4.5 1.4 mm. PET insulation cap is positioned
under the insulation sleeve.
All pin holes must be drilled into the PC-board,
since the unconnected pins serve as mountings.
These pins must be soldered to isolated pads or
pads with the same potential as the negative
pole.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 19
B43514, B43524
Extended temperature range 105 °C
B43524, solder pins
Pole markings: Plus: +; Minus: All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings.
These pins must be soldered to isolated pads or pads with the same potential as the negative
pole.
Dimensions
(mm)
d +1 Imax
Approx.
weight (g)
Packing
units (pcs.)
35
35
35
35
54
64
74
84
63
76
88
101
60
36
36
36
40
40
40
40
40
40
40
44
54
64
74
84
94
104
71
89
107
125
143
161
178
33
33
33
33
33
33
33
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 19
B43514, B43524
Extended temperature range 105 °C
Packing of 4-pin snap-in terminal and solder pin capacitors
For ecological reasons the packing is pure cardboard.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
4-pin snap-in terminal capacitors
Terminal version
Insulation version
PVC
PVC plus PET cap
Standard terminals 6.3 mm
M000
M080
Short terminals 4.5 mm
M007
M087
Ordering examples:
B43514A9188M007
}
B43514A9188M080
}
4-pin snap-in capacitor with short terminals and standard PVC
insulation
4-pin snap-in capacitor with standard terminals and PVC insulation
with additional PET insulation cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 19
B43514, B43524
Extended temperature range 105 °C
Overview of available types
VR (V DC)
350
400
420
450
35 × 50
40 × 40
35 × 50
40 × 40
35 × 50
40 × 40
35 × 60
40 × 50
35 × 60
40 × 50
45 × 40
Case dimensions d × l (mm)
CR (µF)
390
470
560
35 × 50
40 × 40
35 × 60
40 × 50
45 × 40
35 × 70
40 × 50
45 × 40
35 × 70
40 × 60
45 × 50
680
35 × 60
40 × 50
35 × 70
40 × 50
45 × 50
35 × 70
40 × 60
45 × 50
35 × 80
40 × 60
45 × 50
820
35 × 70
40 × 50
45 × 40
35 × 80
40 × 60
45 × 50
35 × 80
40 × 70
45 × 50
40 × 70
45 × 60
1000
35 × 80
40 × 60
45 × 50
40 × 70
45 × 60
40 × 80
45 × 60
40 × 80
45 × 70
1200
40 × 70
45 × 60
40 × 80
45 × 70
40 × 100
45 × 70
40 × 100
45 × 80
1500
40 × 90
45 × 70
45 × 80
45 × 90
45 × 100
1800
40 × 100
45 × 80
45 × 100
45 × 100
2200
45 × 100
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 19
B43514, B43524
Extended temperature range 105 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 350 V DC
560
35 × 50
560
40 × 40
680
35 × 60
680
40 × 50
820
35 × 70
820
40 × 50
820
45 × 40
1000
35 × 80
1000
40 × 60
1000
45 × 50
1200
40 × 70
1200
45 × 60
1500
40 × 90
1500
45 × 70
1800
40 × 100
1800
45 × 80
2200
45 × 100
VR = 400 V DC
470
35 × 50
470
40 × 40
560
35 × 60
560
40 × 50
560
45 × 40
680
35 × 70
680
40 × 50
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,max
100 Hz
85 °C
A
IAC,R
Ordering code
100 Hz (composition see
105 °C below)
A
160
160
130
130
110
110
110
90
90
90
75
75
60
60
50
50
40
250
250
200
200
170
170
170
140
140
140
120
120
100
100
80
80
65
200
200
160
160
140
140
140
110
110
110
100
100
75
75
65
65
50
6.05
5.90
7.14
7.03
8.34
7.72
7.20
9.72
9.11
8.56
10.5
10.0
13.0
11.8
14.9
13.6
16.5
4.52
4.41
5.34
5.26
6.23
5.77
5.39
7.27
6.82
6.41
7.92
7.49
9.79
8.86
11.2
10.2
12.3
2.24
2.18
2.64
2.60
3.08
2.85
2.66
3.60
3.37
3.17
3.92
3.70
4.84
4.39
5.54
5.06
6.11
B435*4K4567M0##
B435*4L4567M0##
B435*4K4687M0##
B435*4L4687M0##
B435*4K4827M0##
B435*4L4827M0##
B43514M4827M0##
B435*4K4108M0##
B435*4L4108M0##
B43514M4108M0##
B435*4K4128M0##
B43514L4128M0##
B435*4B4158M0##
B43514D4158M0##
B435*4A4188M0##
B43514B4188M0##
B43514A4228M0##
190
190
160
160
160
130
130
290
290
250
250
250
200
200
240
240
200
200
200
160
160
5.54
5.41
6.48
6.38
5.95
7.59
7.03
4.14
4.04
4.85
4.77
4.45
5.68
5.26
2.05
2.00
2.40
2.36
2.20
2.81
2.60
B435*4K9477M0##
B435*4L9477M0##
B435*4K9567M0##
B435*4L9567M0##
B43514M9567M0##
B435*4K9687M0##
B435*4L9687M0##
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
2 = solder pin
Please read Cautions and warnings and
Important notes at the end of this document.
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Page 9 of 19
B43514, B43524
Extended temperature range 105 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 400 V DC
680
45 × 50
820
35 × 80
820
40 × 60
820
45 × 50
1000
40 × 70
1000
45 × 60
1200
40 × 80
1200
45 × 70
1500
45 × 80
1800
45 × 100
VR = 420 V DC
390
35 × 50
390
40 × 40
470
35 × 60
470
40 × 50
560
35 × 70
560
40 × 50
560
45 × 40
680
35 × 70
680
40 × 60
680
45 × 50
820
35 × 80
820
40 × 70
820
45 × 50
1000
40 × 80
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,max
100 Hz
85 °C
A
IAC,R
Ordering code
100 Hz (composition see
105 °C below)
A
130
110
110
110
90
90
75
75
60
50
200
170
170
170
140
140
120
120
100
80
160
140
140
140
110
110
100
100
75
65
7.06
8.80
8.25
7.75
9.66
9.14
11.1
10.6
12.4
14.9
5.28
6.58
6.17
5.80
7.23
6.83
8.35
7.93
9.33
11.1
2.61
3.26
3.05
2.87
3.58
3.38
4.13
3.92
4.62
5.53
B43514M9687M0##
B435*4K9827M0##
B435*4L9827M0##
B43514M9827M0##
B435*4K9108M0##
B43514L9108M0##
B435*4K9128M0##
B43514L9128M0##
B43514B9158M0##
B43514A9188M0##
390
390
330
330
270
270
270
230
230
230
190
190
190
150
600
600
500
500
420
420
420
340
340
340
290
290
290
240
480
480
400
400
330
330
330
280
280
280
230
230
230
190
5.05
4.93
5.94
5.84
6.89
6.38
5.95
7.59
7.51
7.06
8.80
8.75
7.75
10.1
3.77
3.68
4.44
4.37
5.15
4.77
4.45
5.68
5.62
5.28
6.58
6.55
5.80
7.62
1.87
1.82
2.20
2.16
2.55
2.36
2.20
2.81
2.78
2.61
3.26
3.24
2.87
3.77
B435*4K0397M0##
B435*4L0397M0##
B435*4K0477M0##
B435*4L0477M0##
B435*4K0567M0##
B435*4L0567M0##
B43514M0567M0##
B435*4K0687M0##
B435*4L0687M0##
B43514M0687M0##
B435*4K0827M0##
B435*4L0827M0##
B43514M0827M0##
B435*4K0108M0##
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
2 = solder pin
Please read Cautions and warnings and
Important notes at the end of this document.
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Page 10 of 19
B43514, B43524
Extended temperature range 105 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 420 V DC
1000
45 × 60
1200
40 × 100
1200
45 × 70
1500
45 × 90
1800
45 × 100
VR = 450 V DC
390
35 × 50
390
40 × 40
470
35 × 60
470
40 × 50
470
45 × 40
560
35 × 70
560
40 × 60
560
45 × 50
680
35 × 80
680
40 × 60
680
45 × 50
820
40 × 70
820
45 × 60
1000
40 × 80
1000
45 × 70
1200
40 × 100
1200
45 × 80
1500
45 × 100
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,max
100 Hz
85 °C
A
IAC,R
Ordering code
100 Hz (composition see
105 °C below)
A
150
130
130
100
85
240
200
200
160
130
190
160
160
130
110
9.14
12.2
10.6
13.0
14.9
6.83
9.15
7.93
9.78
11.1
3.38
4.52
3.92
4.84
5.53
B43514L0108M0##
B435*4A0128M0##
B43514B0128M0##
B43514B0158M0##
B43514A0188M0##
390
390
330
330
330
270
270
270
230
230
230
190
190
150
150
130
130
100
600
600
500
500
500
420
420
420
340
340
340
290
290
240
240
200
200
160
480
480
400
400
400
330
330
330
280
280
280
230
230
190
190
160
160
130
5.05
4.93
5.94
5.84
5.45
6.89
6.82
6.41
8.01
7.51
7.06
8.75
8.27
10.1
9.67
12.2
11.1
13.6
3.77
3.68
4.44
4.37
4.08
5.15
5.10
4.79
5.99
5.62
5.28
6.55
6.19
7.62
7.24
9.15
8.35
10.2
1.87
1.82
2.20
2.16
2.02
2.55
2.52
2.37
2.96
2.78
2.61
3.24
3.06
3.77
3.58
4.52
4.13
5.05
B435*4K5397M0##
B435*4L5397M0##
B435*4K5477M0##
B435*4L5477M0##
B43514M5477M0##
B435*4K5567M0##
B435*4L5567M0##
B43514M5567M0##
B435*4K5687M0##
B435*4L5687M0##
B43514M5687M0##
B435*4K5827M0##
B43514L5827M0##
B435*4K5108M0##
B43514L5108M0##
B435*4B5128M0##
B43514C5128M0##
B43514B5158M0##
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
2 = solder pin
Please read Cautions and warnings and
Important notes at the end of this document.
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Page 11 of 19
B43514, B43524
Extended temperature range 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Frequency factor of permissible
ripple current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" on how to interpret the useful life graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 19
B43514, B43524
Extended temperature range 105 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 19
B43514, B43524
Extended temperature range 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 19
B43514, B43524
Extended temperature range 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Polarity
Make sure that polar capacitors are connected
with the right polarity.
Reverse voltage
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperatur.
Upper category
temperature
Maintenance
Mounting
position of screw
terminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
Reference
Chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1.
"Mounting positions of
capacitors with screw
terminals"
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 19
B43514, B43524
Extended temperature range 105 °C
Topic
Soldering,
cleaning agents
Passive
flammability
Active
flammability
Safety information
Reference
Chapter "General
technical information"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Avoid external energy, such as fire or electricity.
8.1
"Passive flammability"
Avoid overload of the capacitors.
8.2
"Active flammability"
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 19
Reference
Chapter "Capacitors
with screw terminals"
"Screw terminals accessories"
B43514, B43524
Extended temperature range 105 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Rated ripple current for base cooling
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,rms
IAC,f
IAC,max
IAC,R
IAC,R (B)
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
∆T
TA
TC
TB
t
∆t
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Becherbodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 17 of 19
B43514, B43524
Extended temperature range 105 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 19
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 19 of 19
Similar pages