WTE BAW56W-T3 Surface mount fast switching diode Datasheet

BAW56W
WTE
POWER SEMICONDUCTORS
SURFACE MOUNT FAST SWITCHING DIODE
Features
!
High Conductance
L
!
!
Fast Switching
Surface Mount Package Ideally Suited for
Automatic Insertion
! For General Purpose and Switching
B
! Plastic Material – UL Recognition Flammability
Classification 94V-O
A
TOP VIEW
C
M
E
D
H
Dim
A
B
C
D
E
G
H
J
K
L
M
Mechanical Data
!
!
!
!
!
!
Case: SOT-323, Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 0.006 grams (approx.)
Mounting Position: Any
Marking: JC
K
J
G
TOP VIEW
SOT-323
Min
Max
0.30
0.40
1.15
1.35
2.00
2.20
0.65 Nominal
0.30
0.40
1.20
1.40
1.80
2.20
—
0.10
0.90
1.10
0.25
—
0.05
0.15
All Dimensions in mm
Maximum Ratings @TA=25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Non-Repetitive Peak Reverse Voltage
VRM
100
V
VRRM
VRWM
VR
75
V
Forward Continuous Current (Note 1)
IF
300
mA
Average Rectified Output Current (Note 1)
IO
150
mA
IFSM
2.0
A
Pd
200
mW
RJA
625
K/W
Tj, TSTG
-65 to +150
°C
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Peak Forward Surge Current (Note 1)
@ t < 1.0µs
Power Dissipation (Note 1)
Typical Thermal Resistance, Junction to Ambient Air (Note 1)
Operating and Storage Temperature Range
Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Symbol
Min
Max
Unit
Test Condition
Forward Voltage
VF
—
—
0.855
1.0
V
@ IF = 10mA
@ IF = 50mA
Reverse Leakage Current
IR
—
2.5
µA
@ VR = 75V
Junction Capacitance
Cj
—
2.0
pF
VR = 0V, f = 1.0MHz
Reverse Recovery Time
trr
—
6.0
nS
IF = IR = 10mA,
IRR = 0.1 x IR, RL = 100
Note: 1. Device mounted on fiberglass substrate 40 x 40 x 1.5mm.
BAW56W
1 of 3
© 2002 Won-Top Electronics
10,000
100
IR, LEAKAGE CURRENT (nA)
IF, INSTANTANEOUS FORWARD CURRENT (mA)
1000
10
1.0
0.1
1000
100
10
VR = 20V
1
0.01
0
1
2
100
200
Tj, JUNCTION TEMPERATURE (°C)
Fig. 2 Leakage Current vs Junction Temperature
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Forward Characteristics
BAW56W
0
2 of 3
© 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.!
Package Type
Shipping Quantity
BAW56W-T1
SOT-323
3000/Tape & Reel
BAW56W-T3
SOT-323
10000/Tape & Reel
Products listed in bold are WTE Preferred devices.
!
T1 suffix refers to a 7” reel. T3 suffix refers to a 13” reel.
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
RECOMMENDED FOOTPRINT
0.035
(0.90)
0.075
(1.90)
0.035
(0.90)
0.028
(0.70)
0.025
(0.64)
inches(mm)
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
BAW56W
We power your everyday.
3 of 3
© 2002 Won-Top Electronics
Similar pages