3.5 x2.8mm SMD CHIP LED LAMP Part Number: APED3528PBC/A-F01 PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z SINGLE COLOR. The Blue source color devices are made with InGaN z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER on SiC Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. z IDEAL FOR BACKLIGHTING. It is recommended to use a wrist band or anti-electrostatic z AVAILABLE ON TAPE AND REEL. glove when handling the LEDs. z PACKAGE: 500PCS / REEL. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF4595 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203004176 Selection Guide Part No. Dice APED3528PBC/A-F01 Lens Type Blue (InGaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 50 150 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF4595 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203004176 Blue APED3528PBC/A-F01 SPEC NO: DSAF4595 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203004176 APED3528PBC/A-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF4595 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203004176 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF4595 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu APED3528PBC/A-F01 DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203004176