Kingbright AP23YC/F-F01 3x2.4mm smd chip led lamp Datasheet

3x2.4mm SMD CHIP LED LAMP
AP23YC/F-F01
YELLOW
Features
z3mmx2.4mm SMT LED, 1.05mm THICKNESS.
Description
zLOW POWER CONSUMPTION.
The Yellow source color devices are made with Gallium
zWIDE VIEWING ANGLE.
Arsenide Phosphide on Gallium Phosphide Yellow Light
zIDEAL FOR BACKLIGHT AND INDICATOR.
Emitting Diode.
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO:DSAF1212
REV NO: V.1
DATE: MAR/17/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203002782-01
Selection Guide
Part No.
Dice
AP23YC/F-F01
Iv (mcd)
@ 20mA
Lens Type
YELLOW (GaAsP/GaP)
Viewing
Angle
Min.
Typ.
2θ1/2
2.6
8
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Yellow
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
-40°C To +85°C
Operating / Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO:DSAF1212
REV NO: V.1
DATE: MAR/17/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203002782-01
Yellow
AP23YC/F-F01
SPEC NO:DSAF1212
REV NO: V.1
DATE: MAR/17/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203002782-01
AP23YC/F-F01
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO:DSAF1212
REV NO: V.1
DATE: MAR/17/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1203002782-01
Similar pages