2SA1932 TOSHIBA Transistor Silicon PNP Epitaxial Type 2SA1932 Power Amplifier Applications Driver Stage Amplifier Applications • High transition frequency: fT = 70 MHz (typ.) • Complementary to 2SC5174 Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −230 V Collector-emitter voltage VCEO −230 V Emitter-base voltage VEBO −5 V Collector current IC −1 A Base current IB −0.1 A Collector power dissipation PC 1.8 W Junction temperature Tj 150 °C JEDEC ― Tstg −55 to 150 °C JEITA ― Storage temperature range TOSHIBA 2-10T1A Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in Weight: 1.5 g (typ.) temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SA1932 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = −230 V, IE = 0 ― ― −1.0 μA Emitter cut-off current IEBO VEB = −5 V, IC = 0 ― ― −1.0 μA V (BR) CEO IC = −10 mA, IB = 0 −230 ― ― V Collector-emitter breakdown voltage DC current gain hFE VCE = −5 V, IC = −100 mA 100 ― 320 VCE (sat) IC = −500 mA, IB = −50 mA ― ― −1.5 V Base-emitter voltage VBE VCE = −5 V, IC = −500 mA ― ― −1.0 V Transition frequency fT VCE = −10 V, IC = −100 mA ― 70 ― MHz VCB = −10 V, IE = 0, f = 1 MHz ― 30 ― pF Collector-emitter saturation voltage Collector output capacitance Cob Marking A1932 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SA1932 IC – VCE IC – VBE −1.0 −1.0 −10 Common emitter VCE = −5 V −8 (A) −0.8 −6 Collector current IC Collector current IC (A) −20 −0.6 −4 −0.4 IB = −2 mA −0.2 −0.8 Ta = 100°C −0.6 25 −25 −0.4 −0.2 Common emitter Ta = 25°C 0 0 −2 −4 −6 −8 Collector-emitter voltage 0 0 −10 VCE (V) −0.2 −0.4 25 −25 50 30 10 −0.003 −0.01 −0.03 −1.4 VBE (V) Common emitter Ta = 100°C 100 −1.2 VCE (sat) – IC −0.1 −0.3 Collector current IC −1 −3 Collector-emitter saturation voltage VCE (sat) (V) DC current gain hFE 300 −1.0 −3 Common emitter VCE = −5 V 500 −0.8 Base-emitter voltage hEF – IC 1000 −0.6 (A) −1 IC/IB = 10 −0.5 −0.3 Ta = 100°C −0.1 −0.05 −0.03 −0.01 −0.003 −25 −0.01 25 −0.03 −0.1 −0.3 Collector current IC −1 −3 (A) fT – IC Transition frequency fT (MHz) 500 300 Common emitter VCE = −10 V Ta = 25°C 100 50 30 10 −5 −10 −30 −100 Collector current IC −300 −1000 (mA) 3 2006-11-09 2SA1932 rth – tw Transient thermal resistance rth (°C/W) 300 Curves should be applied in thermal limited area. (Single nonrepetitive pulse) Ta = 25°C 100 30 10 3 1 0.3 0.001 0.01 0.1 1 Pulse width 10 tw 100 (s) Safe Operating Area PC – Ta −5 2.0 IC max (pulsed)* (W) −3 1.6 (A) −0.5 Collector current IC −1 Collector power dissipation PC IC max (continuous) −0.3 1000 1 ms* 10 ms* 100 ms* DC operation Ta = 25°C −0.1 −0.05 −0.03 *: Single nonrepetitive pulse Ta = 25°C −0.01 Curves must be derated linearly with increase in −0.005 VCEO max temperature. −0.003 −1 −3 −5 −10 −30 −50 −100 1.2 0.8 0.4 0 0 25 50 75 100 125 150 175 Ambient temperature Ta (°C) −300 −500 Collector-emitter voltage VCE (V) 4 2006-11-09 2SA1932 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-09