Cypress CY2304NZZXC-1T Four output pci-x and general purpose buffer Datasheet

CY2304NZ
Four Output PCI-X and
General Purpose Buffer
Four Output PCI-X and General Purpose Buffer
Features
Functional Description
■
One input to four output buffer/driver
The CY2304NZ is a low-cost buffer designed to distribute
high-speed clocks for PCI-X and other applications. The device
operates at 3.3 V and outputs can run up to 140 MHz.
■
General-purpose or PCI-X clock buffer
■
Buffers all frequencies from DC to 140 MHz
■
Output-to-output skew less than 100 ps
■
Space-saving 8-pin TSSOP package
■
3.3 V operation
■
60 ps typical output-output skew
Table 1. Function Table
Inputs
Outputs
BUF_IN
OE
Output [1:4]
L
H
L
H
L
L
H
H
L
L
L
H
Block Diagram
Logic
Control
OE
BUF_IN
OUTPUT1
OUTPUT2
OUTPUT3
OUTPUT4
Pin Configuration
8-pin TSSOP
Top View
BUF_IN
OE
1
8
2
7
OUTPUT1
GND
3
6
4
5
OUTPUT4
OUTPUT3
VDD
OUTPUT2
Pin Description for CY2304NZ
Signal
Pin
Description
VDD
6
3.3 V voltage supply
GND
4
Ground
BUF_IN
1
Input clock
OUTPUT [1:4]
OE
3, 5, 7, 8
Outputs
2
Cypress Semiconductor Corporation
Document Number: 38-07099 Rev. *E
Input pin for output enable, active HIGH.
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised February 8, 2011
[+] Feedback
CY2304NZ
Maximum Ratings
Max. Soldering Temperature (10 sec.) ...................... 260 °C
Junction Temperature ................................................ 150 °C
Supply Voltage to Ground Potential..... –0.5 V to VDD + 0.5 V
Static Discharge Voltage
(per MIL-STD-883, Method 3015) .......................... > 2,000 V
DC Input Voltage ................................. –0.5 V to VDD + 0.5 V
Storage Temperature ............................... –65 °C to +150 °C
Operating Conditions
Parameter
Description
Min
Max
Unit
VDD
Supply Voltage
3.0
3.6
V
TA
Operating Temperature (Ambient Temperature)
–40
85
°C
CL
Load Capacitance
–
25
pF
CIN
Input Capacitance
–
7
pF
DC
140
MHz
0.05
50
ms
Min
Max
Unit
–
0.8
V
BUF_IN, OUTPUT [1:4] Operating Frequency
Power-up time for all VDD’s to reach minimum specified voltage
(power ramps must be monotonic)
tPU
Electrical Characteristics
Parameter
VIL
Description
Input LOW
Voltage[1]
Voltage[1]
Test Conditions
VIH
Input HIGH
2.0
–
V
IIL
Input LOW Current
VIN = 0 V
–5
5
A
IIH
Input HIGH Current
VIN = VDD
–5
5
A
IOL = 24 mA
–
0.8
V
Voltage[2]
VOL
Output LOW
VOH
Output HIGH Voltage[2]
IOL = 12 mA
IDD
Supply Current
–
0.55
V
IOH = –24 mA
2.0
–
V
IOH = –12 mA
2.4
–
V
–
25
mA
Unloaded outputs at 66.66 MHz
Switching Characteristics[3]
for Commercial and Industrial Temperature Devices
Parameter
Name
Duty Cycle
t3
Rise
[2]
= t2  t1
Time[2]
Time[2]
Description
Min
Typ
Max
Unit
40.0
50.0
60.0
%
Measured between 0.8 V and 2.0 V
–
–
1.50
ns
Measured at 1.5 V
t4
Fall
Measured between 0.8 V and 2.0 V
–
–
1.50
ns
t5
Output to Output Skew[2]
All outputs equally loaded
–
60
100
ps
t6
Propagation Delay,
BUF_IN Rising Edge to
OUTPUT Rising Edge[2]
Measured at VDD/2
2.5
3.5
5
ns
Notes
1. BUF_IN input has a threshold voltage of VDD/2.
2. Parameter is guaranteed by design and characterization. It is not 100% tested in production.
3. All parameters specified with loaded outputs.
Document Number: 38-07099 Rev. *E
Page 2 of 8
[+] Feedback
CY2304NZ
Switching Waveforms
Duty Cycle Timing
t1
t2
1.5 V
1.5 V
1.5 V
All Outputs Rise/Fall Time
OUTPUT
2.0 V
0.8 V
2.0 V
0.8 V
3.3 V
0V
t4
t3
Output-Output Skew
OUTPUT
1.5 V
1.5 V
OUTPUT
t5
Input-Output Propagation Delay
INPUT
VDD/2
VDD/2
OUTPUT
t6
Document Number: 38-07099 Rev. *E
Page 3 of 8
[+] Feedback
CY2304NZ
Ordering Information
Ordering Code
Package Type
Operating Range
Standard
CY2304NZZI-1
8-pin TSSOP
Industrial, –40 °C to 85 °C
CY2304NZZI-1T
8-pin TSSOP – Tape and Reel
Industrial, –40 °C to 85 °C
CY2304NZZXC-1
8-pin TSSOP
Commercial, 0 °C to 70 °C
CY2304NZZXC-1T
Pb-free
8-pin TSSOP – Tape and Reel
Commercial, 0 °C to 70 °C
CY2304NZZXI-1
8-pin TSSOP
Industrial, –40 °C to 85 °C
CY2304NZZXI-1T
8-pin TSSOP – Tape and Reel
Industrial, –40 °C to 85 °C
Ordering Code Definitions
CY 2304NZ Z
X
X - X T
T = Tape and Reel
X = 1 or 2
Temperature Range: X = C or I
C = Commercial; I = Industrial
X = Pb-free
Package Type:
Z = 8-pin TSSOP
Base Device Part Number
Company ID: CY = Cypress
Document Number: 38-07099 Rev. *E
Page 4 of 8
[+] Feedback
CY2304NZ
Package Diagram
51-85093 *C
Document Number: 38-07099 Rev. *E
Page 5 of 8
[+] Feedback
CY2304NZ
Acronyms
Acronym
Description
PCI
Peripheral Component Interconnect
TSSOP
thin-shrink small outline package
Document Conventions
Units of Measure
Symbol
°C
Unit of Measure
degree Celsius
Hz
Hertz
MHz
Mega Hertz
µA
micro Amperes
mA
milli Amperes
ms
milli seconds
ns
nano seconds

ohms
%
percent
pF
pico Farads
ps
pico seconds
mV
milli Volts
V
Volts
W
Watts
Document Number: 38-07099 Rev. *E
Page 6 of 8
[+] Feedback
CY2304NZ
Document History Page
Document Title: CY2304NZ Four Output PCI-X and General Purpose Buffer
Document Number: 38-07099
REV.
Orig. of
Change
ECN NO.
Issue Date
**
111420
02/12/02
IKA
*A
118610
09/25/02
HWT
Description of Change
New data sheet
Added Industrial Temperature Range in the Ordering Information
*B
121820
12/14/02
RBI
Power-up requirements added to Operating Conditions Information
*C
291098
See ECN
RGL
Added Lead-free Devices
Specified typical value for output-output skew
*D
2904623
04/05/10
CXQ
Removed inactive parts from Ordering Information.
Updated Package Diagram.
*E
3163624
02/05/2011
CXQ
Updated Maximum Ratings (Removed reference to “Except REF” and “REF”
for DC Input Voltage spec).
Added Ordering Code Definitions.
Updated Package Diagram.
Added Acronyms and Units of Measure.
Updated in new template.
Document Number: 38-07099 Rev. *E
Page 7 of 8
[+] Feedback
CY2304NZ
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office
closest to you, visit us at Cypress Locations.
Products
Automotive
Clocks & Buffers
Interface
Lighting & Power Control
PSoC Solutions
cypress.com/go/automotive
cypress.com/go/clocks
psoc.cypress.com/solutions
cypress.com/go/interface
PSoC 1 | PSoC 3 | PSoC 5
cypress.com/go/powerpsoc
cypress.com/go/plc
Memory
Optical & Image Sensing
cypress.com/go/memory
cypress.com/go/image
PSoC
Touch Sensing
cypress.com/go/psoc
cypress.com/go/touch
USB Controllers
Wireless/RF
cypress.com/go/USB
cypress.com/go/wireless
© Cypress Semiconductor Corporation, 2002-2011. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of
any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for
medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as
critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems
application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
Document Number: 38-07099 Rev. *E
Revised February 8, 2011
Page 8 of 8
All products and company names mentioned in this document may be the trademarks of their respective holders.
[+] Feedback
Similar pages