RSG CX4SSM3 14 mhz to 250 mhz ultra-miniature, low profile surface mount at quartz crystal Datasheet

CX4SM AT CRYSTAL
14 MHz to 250 MHz
Ultra-Miniature, Low Profile
Surface Mount AT Quartz Crystal
™
DESCRIPTION
STATEK’s ultra-miniature CX4SM AT crystals in leadless
ceramic packages are designed for surface mounting on
printed circuit boards or hybrid substrates. These crystals
are low profile and have a very small land pattern.
FEATURES
actual size
XX
SXX
glass lid
ceramic lid
PACKAGE DIMENSIONS
Designed for surface mount applications using
infrared, vapor phase, wave solder or epoxy mount
techniques.
Low profile (less than 1.2 mm) hermetically sealed
ceramic package
Excellent aging characteristics
side view
D
A
TOP
BOTTOM
F
Available with glass or ceramic lid
High shock and vibration resistance
Custom designs available
B
Full military testing available
Designed and manufactured in the USA
C
TYPICAL
E
D
MAXIMUM
DIM
inches
mm
inches
mm
A
0.197
5.00
0.210
5.33
Neurostimulators
B
0.072
1.83
0.085
2.16
Cochlear Implants
C
-
-
Implantable CRM
D
0.036
0.91
0.046
1.16
Infusion Pumps
E
0.020
0.51
-
-
Glucose Monitors
F
0.025
0.64
-
-
APPLICATIONS
Medical
see below
Industrial, Computer & Communications
Instrumentation
Process Control
THICKNESS (DIM C) MAXIMUM
Environmental Control
GLASS LID
Engine Control
inches
mm
inches
mm
SM1
0.045
1.14
0.050
1.27
SM2/SM4
0.046
1.17
0.051
1.30
SM3/SM5
0.048
1.22
0.053
1.35
Handheld Inventory Control
Down-hole Data Recorder
Telemetry
Military & Aerospace
CERAMIC LID
Communications Radio
Smart Munitions
Timing Devices (Fuzes)
Surveillance Devices
IS O
RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de
YS
90
01
ERT
T E M C IFIC T
A
N
IO
S
10150 - Rev. D
Pb
SPECIFICATIONS
Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice.
Fundamental Frequency 14.7456 MHz 16MHz 20 MHz 32 MHz 40 MHz 80 MHz 160 MHz 200 MHz
Motional Resistance R1 (Ω)
Motional Capacitance C1 (fF)
Quality Factor Q (k)
Shunt Capacitance C0 (pF)
60
1.4
120
0.8
75
1.5
90
0.9
50
1.4
110
0.9
30
2.5
70
1.1
+
_
Calibration Tolerances1
Load Capacitance
100 ppm, or tighter as required
10 pF (unless specified otherwise)
Drive Level
200 µW MAX for f ≤ 50 MHz
30
1.5
90
1.0
Aging, first year3
5 ppm MAX
(better than 1 ppm available)
Shock, survival
5,000 g, 0.3 ms, 1/2 sine
Vibration, survival5
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
-10OC to +70OC (Commercial)
Storage Temp. Range
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
-55OC to +125OC
Max Process Temperature
260OC for 20 sec.
4
30
2.5
20
1.5
40
2.0
15
1.5
TERMINATIONS
Designation
SM1
100 µW MAX for f > 50 MHz
SM2
+
_ 50 ppm to +
_ 10 ppm (Commercial) SM3
+
_ 100 ppm to +
_ 20 ppm (Industrial)
SM4
+
SM5
_ 100 ppm to +
_ 30 ppm (Military)
Frequency-Temperature
Stability1,3
30
1.8
40
1.0
Termination
Gold Plated (Lead Free)
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
260OC for 20 sec.
Max Process Temperature
EQUIVALENT CIRCUIT
C0
1
L1
C1
R1
2
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
1) Other tolerances available. Contact factory.
2) Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the AT thickness-shear mode.
SUGGESTED LAND PATTERN
3) 5 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies
contact factory.
4) Higher shock version available.
5) Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
0.059 (1.5)
0.092 (2.3)
PACKAGING OPTIONS
• Tray Pack
• Tape and Reel
Per EIA 481 (see Tape and Reel data sheet 10109)
inches (mm)
0.160 (4.0)
HOW TO ORDER CX4SM AT CRYSTALS
CX4
S
“S” if special or
custom design.
Blank if standard
C
SM1
C = Ceramic Lid
Blank = Glass Lid
–
32.0M
Frequency
M = MHz
SM1 = Gold Plated (Lead Free)
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated (Lead Free)
SM5 = Solder Dipped (Lead Free)
,
100
Calibration
Tolerance
@25OC
(in ppm)
/
100
/
—
/
Frequency
Stability over
Temp. Range
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
OR
—
/
—
/
I
200
Total
Frequency
Tolerance
(in ppm)
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
IS O
RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de
YS
90
01
ERT
T E M C IFIC T
A
N
IO
S
10150 - Rev. D
Pb
Similar pages