AIMTEC AM30KW-4824SC 30 watt dc-dc converter Datasheet

AM30KW-C Series
•
POWER MODULES FOR PCB MOUNTING
•
SIX-SIDED CONTINUOUS SHIELD
•
4:1 WIDE INPUT RANGE
•
HIGH EFFICIENCY
•
STANDARD PACKAGE
GENERAL DESCRIPTION
Our AM30KW-C series is a family of cost effective 30W single
and dual output DC-DC converters. These converters are shielded
on all six sides and encapsulated with a nickel-coated copper with
a non-conductive base and dimensions of 50.8x40.64x11.9mm.
The high performance features of our AM30KW-C components
include short circuit protection with hiccup auto recovery, tight line
regulation and a high efficiency operation coefficient up to 89%.
18 models operate from an input voltage of 24, 48VDC
producing output voltages of 1.8, 2.5, 3.3, 5, 12, 15 &
24VDC, ±5, ±12, ±15VDC . The normal operation is
specified over the full operating temperature range of 25°C to +71°C with no derating required. Cooling is
done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Output Specifications:
Voltage range
24 VDC, 10~40VDC
Voltage accuracy
±2%, max.
48 VDC, 18~75VDC
Ripple (1.8 & 5V)
100mVmax
Filter
π (Pi) Network
Ripple (Others)
±1%, max.
Noise
±1%, max.
Isolation Specifications:
Short circuit protection Hiccup, auto-recovery
Rated voltage
1500VDC
Over current protection Works over 120% of rating
Resistance
>1000 Mohms
and recovers automatically
Capacitance
1000pF
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
General Specifications:
Load regulation (10-100%)±1%, typ.,100mV, max -(1,8 - 5V)
Efficiency
78% to 83%
Temperature coefficient ±0.02%/°C, typ.
Switching frequency
300KHz, typ. 100% load
Physical Specifications:
Environmental Specifications:
Dimensions
50.8 x 40.6 x 11.9mm,±0.5mm
Operating temperature
-25°C …+70°C
2.0 x 1.6 x 0.47inches
Storage temperature
-55°C …+105°C
Weight
58g
Case temperature
+100°C, max.
Case material
Nickel-Coated Copper with
Humidity (non-condensing)
Up to 95%
Non-Conductive base,
Cooling
Free-air convection
six sides’ shielded
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
Continued on next page
VISIT US AT WWW.AIMTEC.CA
DC-DC CONVERTERS
30 watt dc-dc converters
AM30KW-C Series
OUTLINE DIMENSIONS & PIN CONNECTIONS
MECHANICAL DIMENSION (Top View)
DC-DC CONVERTERS
Pin
1
2
3
4
5
6
7
DERATING
BLOCK DIAGRAM
SINGLE OUTPUT VOLTAGE
Single
Dual
ON/Off
+V Input
-V Input
Trim
- V Output
Common
+V Output
+V Output
No Pin
TRIMMING
(V.DC) : 1.8V, 2.5V, 3.3V, 5V
SINGLE OUTPUT VOLTAGE
(V.DC) : 12V, 15V, 24V
DUAL OUTPUT VOLTAGE
TO ORDER CALL 1-888-9-AIMTEC
AM30KW-C Series
MODELS
Single output
DC-DC CONVERTERS
Models
AM30KW-2401SC
AM30KW-2402SC
AM30KW-2403SC
AM30KW-2405SC
AM30KW-2412SC
AM30KW-2415SC
AM30KW-2424SC
AM30KW-4801SC
AM30KW-4802SC
AM30KW-4803SC
AM30KW-4805SC
AM30KW-4812SC
AM30KW-4815SC
AM30KW-4824SC
Input Voltage
10VDC-40VDC
18VDC-75VDC
Ouput Voltage
1.8VDC
2.5VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
1.8VDC
2.5VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
Ouput Current max.
6000mA
6000mA
6000mA
6000mA
2500mA
2000mA
1250mA
6000mA
6000mA
6000mA
6000mA
2500mA
2000mA
1250mA
MODELS
Dual output
Models
Input Voltage
Ouput Voltage
Ouput Current max.
AM30KW-2412DC
AM30KW-4805DC
AM30KW-4812DC
AM30KW-4815DC
10VDC-40VDC
±12VDC
±5VDC
±12VDC
±15VDC
1250mA
3000mA
1250mA
1000mA
18VDC-75VDC
TO ORDER CALL 1-888-9-AIMTEC
Similar pages