Willow DLR30-2125-1110K-B Industrial power relay Datasheet

DLR
industrial power relay
• High current switching - 6,600VA max.
• Good inrush current resistance
• Wide range AC coils
• DIN Rail mounting options
• Screw, plug-in or PCB terminals
• Applications include heaters, HVAC and
motor controls
• RoHS Compliant
Contacts
Contact number & arrangement
SPST-NO (1 Form A); DPST-NO (2 Form A)
Contact material
AgCdO, AgSnO2 (Special Order only)
Max. switching voltage
AC/DC 250VAC, 30VDC
W 0.5W (AgCdO), 1W (AgSnO2)
Min. breaking capacity
Rated load (resistive - cos φ=1)
AC1 SPST-NO, DPST-NO PCB : 20A/220VAC
SPST-NO: 30A/220VAC / DPST-NO: 25A/220VAC
Max. switching power
4,400VA (PCB types); 5,500VA (DPST-NO); 6,600VA (SPST-NO)
Initial resistance
≤ 50mΩ, max. at 1A/24VDC
Max. operating frequency at rated load
AC1 1,800 cycles per hour
Coil
Rated voltage
AC 6...200/240V
DC 6...100V
Must release voltage
≥0.15Un
Operating range of supply voltage
See coil tables 1 & 2
Insulation
≥1000MΩ at 500VDC, 50%RH
Insulation resistance
Impulse withstand voltage
Between coil and contact: 10,000V
coil to contact 4,000Vrms, 1min (50/60Hz)
Dielectric strength
contacts of the same pole 2,000Vrms, 1min (50/60Hz)
contacts of different poles (DPST-NO) 2,000Vrms, 1min (50/60Hz)
General Data
Operating time (typical)
mS ≤ 30
Release time (typical)
mS ≤ 30
Electrical Life
ops 1 x 105 at 1,800 ops/hour at rated load (Fig 1.)
Mechanical life
ops 5 x 106 at 1,800 ops/hour
Dimensions
L x W x H various - see drawings (Fig 2.)
approx. 90g (3.17oz) quick connect (fast-on) type
Weight
approx. 100g (3.52oz) PCB terminal type
approx. 120g (4.23oz) Screw terminal type
Ambient temperature
-40 to 85°C
Shock resistance
approx. 100G mechanical durabilty, 10G malfunction durability
Vibration resistance
DA 1.5mm 10-55Hz
Page 1 of 7
Ref: DLR 091411JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DLR
industrial power relay
DC Coil Data (at 23°C)
Coil Voltage Code
Table 1
Nominal Voltage
(V DC)
Coil Resistance
(Ω) ±10%
Power
Consumption
approx. (mW)
Must Operate
Voltage max.
(V DC)
Must Release
Voltage min.
(V DC)
Max. Allowable
Voltage
(V DC)
1006
6
18.9
4.5
0.9
6.6
1012
12
75
9
1.8
13.2
1024
24
303
1048
48
1220
1100
100
5260
1.9W
0
1
18
3.6
26.4
36
7.2
52.8
75
15.0
110.0
AC Coil Data (at 23°C)
Coil Voltage Code
Table 2
Nominal Voltage
(V AC)
Rated Coil Current
(mA) +15/-20%
5012
12
142
5024
24
71
5050
50
34
Power
Consumption
approx. (mW)
Must Operate
Voltage max.
(V AC)
9
0.9
13.2
1.7 to 2.5VA
(60Hz)
18
1.8
26.4
37.5
3.6
55
0
Must Release
Voltage min.
(V AC)
Max. Allowable
Voltage
(V AC)
1
5120
100 to 120
17 to 20.4
75
18
132
5230
200 to 240
8.5 to 10.2
150
36
264
Ordering codes
Contact
Material
Type
D
L
R
Contact
arrangement
-
Cover protection and
mounting
Coil code
Options
-
-
-
Contact material
see Tables 1, & 2
10
-
AgCdO
30
-
AgSnO2 (special order - contact factory)
Contact arrangement
21
-
SPST-NO (1 N/O)
22
-
DPST-NO (2 N/O)
Cover protection category
2
-
in cover, IP40
4
-
cover with flange mount, IP40
9
-
cover with flange and DIN Rail Mount, IP40
Connection mode
5
-
for PCB
6
-
6.35mm quick connect blade terminals
8
-
screw terminals
Options
NIL
-
No option
K
-
Test button
Coil insulation type
NIL
-
Class F (standard)
B
-
Class B (special order - contact factory)
Page 2 of 7
Ref: DLR 091411JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DLR
industrial power relay
Reference Curves
Fig. 1
DLR SPST-NO (except PCB)
Maximum Switching Power
Life Expectancy
AC resistive load
50
40
30
20
AC inductive load
(cos =0.4)
10
5
1
10
30
50 70 100
300 500 1,000
Life expectancy (x 10 3 operation)
Switching current (A)
100
Switching voltage (V)
220VAC resistive load
220VAC inductive load
(cos =0.4)
Switching current (A)
DLR DPST-NO (except PCB)
Maximum Switching Power
Life Expectancy
AC inductive load
AC resistance load
(cos =0.4)
50
40
30
20
10
5
1
10
30
50 70 100
300 500 1,000
Life expectancy (x 10 3 operation)
Switching current (A)
100
Switching voltage (V)
220VAC resistive load
220VAC inductive load
(cos =0.4)
Switching current (A)
DLR PCB SPST-NO, DPST-NO
Maximum Switching Power
Life Expectancy
AC inductive load
AC resistance load
(cos =0.4)
50
40
30
20
10
5
1
10
30
50 70 100
300 500 1,000
Switching voltage (V)
Page 3 of 7
Ref: DLR 091411JHM
www.durakoolrelays.com
Life expectancy (x 10 3 operation)
Switching current (A)
100
220VAC resistive load
220VAC inductive load
(cos =0.4)
Switching current (A)
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DLR
industrial power relay
Overall Dimensions and Wiring Diagrams
Fig. 2
DLR10-2126 / DLR10-2126-K
(shown with DLR99 mounting bracket)
52.5 max.
33.5 max.
50.5 max.
Mounting Holes
(DLR99 Bracket)
0.8
6.35
11
Two x 4.5-dia. holes or
M4 tapped holes
(Top View)
53 max.
0
1
4
6
40 +1
-
DLR10-2226 / DLR10-2226-K
(shown with DLR99 mounting bracket)
52.5 max.
33.5 max.
50.5 max.
0.8
6.35
11
(Top View)
53 max.
0
1
2
4
6
8
DLR10-2128 / DLR10-2128-K
(shown with DLR99 mounting bracket)
52.5 max.
Two x M3.5 screws
for coil
50.5 max.
34.5max.
Mounting Holes
(DLR99 Bracket)
(Top View)
Two x 4.5-dia. holes or
M4 tapped holes
0
1
55max.
4
6
40 +1
-
DLR10-2228 / DLR10-2228-K
(shown with DLR99 mounting bracket)
52.5 max.
Two x M3.5 screws
for coil
50.5 max.
34.5max.
(Top View)
55max.
0
2
1
4
6
8
All dimensions in mm
Specifications are subject to change without notice. E&OE.
Page 4 of 7
www.durakoolrelays.com
Ref: DLR 091411JHM
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DLR
industrial power relay
Overall Dimensions and Wiring Diagrams
Fig. 2 (cont.)
DLR10-2146 / DLR10-2146-K
68.5 max.
33.5 max.
60
50.5 max.
6.35
0.8
(Top View)
Two x 4.5-dia. holes or
M4 tapped holes
11
0
1
47 max.
4
6
60+0.2
-
3
0.8
DLR10-2246 / DLR10-2246-K
68.5 max.
33.5 max.
60
50.5 max.
6.35
0.8
(Top View)
Two x 4.5-dia. holes or
M4 tapped holes
11
0
1
47 max.
2
6
4
8
60+0.2
-
3
0.8
DLR10-2148 / DLR10-2148-K
Mounting Holes
68.5 max.
60 max.
Two x M3.5 screws
for coil
34.5max.
50.5 max.
Two x M4 screws
for contact
(Top View)
Two x 4.5-dia. holes or
M4 tapped holes
0
49max.
1
4
6
60+0.2
4.5
DLR10-2248 / DLR10-2248-K
Mounting Holes
68.5 max.
60 max.
Two x M3.5 screws
for coil
34.5max.
50.5 max.
(Top View)
Two x M4 screws
for contact
Two x 4.5-dia. holes or
M4 tapped holes
0
49max.
2
1
4
6
8
60+0.2
3
4.5
Page 5 of 7
Ref: DLR 091411JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
All dimensions in mm
Specifications are subject to change without notice. E&OE.
DLR
industrial power relay
Overall Dimensions and Wiring Diagrams
Fig. 2 (cont.)
DLR10-2125
(for PCB mounting)
Mounting Holes
(Top View)
(Top View)
DLR10-2225
(for PCB mounting)
Mounting Holes
(Top View)
(Top View)
DLR10-2196
(for DIN rail mounting)
Terminal Arrangement /
Internal Connections
(Top View)
(Top Vie w)
0
1
4
6
DLR10-2296
(for DIN rail mounting)
(Top Vie w)
0
24
2
1
4
668
8
All dimensions in mm
Specifications are subject to change without notice. E&OE.
Page 6 of 7
www.durakoolrelays.com
Ref: DLR 091411JHM
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
DLR
industrial power relay
Overall Dimensions and Wiring Diagrams
Fig. 2 (cont.)
DLR10-2198 / DLR10-2198-K
(for DIN rail mounting)
Terminal Arrangement /
Internal Connections
(Top View)
(Top Vie w)
0
1
4
6
DLR10-2298 / DLR10-2298-K
(for DIN rail mounting)
(Top Vie w)
0
24
2
1
4
668
8
All dimensions in mm
Accessories / Overall Dimensions
Fig. 3
DLR99 Mounting Bracket
40
26
24
Two x 4.5-dia. holes
17.8
46
10
3
24
19.7
7
30
5
5
4.4
50
DLR7LF-06 DIN Rail Socket
Two x M3.5 screws
for coil
8
51.5 max.
Four x M4 screws
for contact
25
9.2
46 max.
40±0.1
5
55.5 max.
DLR7LF-C Finger protection cover
34.5 max.
50.5 max.
1
6 max.
All dimensions in mm
Page 7 of 7
Ref: DLR 091411JHM
www.durakoolrelays.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
Similar pages