BY500-50-BY500-1000 Soft Recovery Fast Switching Plastic Rectifier Reverse Voltage - 50 to 1000 Volts Forward Current - 5.0 Amperes Features DO-201AD Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High surge current capability Fast switching for high efficiency High forward current operation at T L=45 Construction utilizes void-free molded plastic technique Especially designed for applications such as Switch Mode Power Supplies, Inverters, Converters, TV scanning, Ultrasonic-systems, Speed controlled DC Motors, Low RF Interference and Free Wheeling Diode Circuits High temperature soldering guaranteed: 250 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data Case: DO-201AD molded plastic body Polarity: Color band denotes cathode end Mounting Position: Any Weight: 1.2 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Type Number Symbols BY500 -50 BY500 -100 BY500 -200 BY500 -400 BY500 -600 BY500 -800 BY500 -1000 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=45 I(AV) 5.0 Amps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load at TA=25 IFSM 200.0 Amps Maximum repetitive peak forward surge IFRM 10.0 Amps Maximum instantaneous forward voltage at 5.0A VF 1.35 Volts IR 10.0 1.0 A mA Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Maximum reverse recovery time (Note 1) Maximum reverse recovery current (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Trr 200.0 nS IRM(REC) 2.0 Amps CJ 28.0 F 22.0 /W R Operating junction temperature range Storage temperature range JA TJ -50 to +125 TSTG -50 to +150 Notes: (1) Reverse recovery test conditions: I =0.5A, I =1.0A, I =0.25A F R rr (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length with both leads to heat sink ht t p : // Revision:20170701-P1 www.lgesemi .c o m mail:[email protected] BY500-50-BY500-1000 Soft Recovery Fast Switching Plastic Rectifier RATINGS AND CHARACTERISTIC CURVES PACKAGE SPQ/PCS CARTON SPQ/PCS CARTON SIZE/CM CARTON GW/KG CARTON NW/KG DO-27 1250/AMMO 12500 40X26.5X30 14.00 12.00 ht t p : // Revision:20170701-P1 www.lgesemi .c o m mail:[email protected]