Ecliptek EV32C1J4A2-35.328MTR Ceramic smd3.3v hcmos/ttl vcxo Datasheet

Marketing Bulletin
DATE:
Thursday, November 01, 2001
TO:
Affected Customers
FROM:
Marketing
RE:
EV32C1 Series Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the EV32C1 series
Ecliptek oscillator effective Thursday, November 01, 2001.
In compliance with our End of Life (EOL) policy, this notice will serve as advanced
notice of product termination. New orders will not be accepted after Friday, February 01,
2002, with delivery to be conclude by Tuesday, April 30, 2002.
The EV32C3 OR EV32C6 series is a recommended alternate for the EV32C1 series.
This may not be an exact cross, so it is highly recommended that the data sheet(s) of
the recommended alternate are reviewed and samples tested to ensure conformance.
If there are any questions pertaining to this bulletin, please contact your Ecliptek sales
representative. Thank you again for your cooperation.
Ecliptek Marketing
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
STANDARD SPECIFICATIONS
Code
A
B
D
E
F
H
J
Frequency Range (FO)
Frequency Tolerance & Stability / Operating
Temperature Range (OTR)
(All Values Inclusive of OTR, Vdd, and CLOAD, with
VC = 1.65VDC)
Storage Temperature Range (STR)
Supply Voltage (V DD) / Input Current (I DD)
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise/Fall Time (TR/TF)
Duty Cycle (SYM)
1
2
Load Drive Capability (CLOAD)
Start Up Time (TS) / Aging (@ 25°C)
Typical Phase Noise (at offsets 10Hz to 1MHz)
Period Jitter: RMS (TJRMS)
Absolute Pull Range (APR)
[All Values Inclusive of OTR, Vdd, CLOAD, and Aging
over Control Voltage Range (VC)]
1
2
3
4
5
A
B
C
Linearity
Control Voltage Range (V C) / Test Conditions forAPR
Control Voltage Range (V CR) / Transfer Function
Input Impedance (Z I)
Modulation Bandwidth (MBW)
16.384MHz to 44.736MHz (See TEN08-563-800 for a list of standard frequencies)
Not Specified over 0°C to +70°C
Not Specified over -40°C to +85°C
±50ppm Max. over 0°C to +70°C
±25ppm Max. over 0°C to +70°C
±20ppm Max. over 0°C to +70°C
±50ppm Max. over -40°C to +85°C
±25ppm Max. over -40°C to +85°C
-55°C to +125°C
3.3VDC ±10% / 15mA Maximum
90% of VDD Minimum
10% of VDD Maximum
5nSec Maximum (20% to 80% of waveform)
50% ±10% (@ 50% of waveform)
50% ±5% (@ 50% of waveform)
15pF HCMOS Load Maximum
10 mSec Maximum / ±2ppm/1st year Typical, ±10ppm/10 years Maximum
-70dBc/Hz, -100dBc/Hz, -130dBc/Hz, -147dBc/Hz, -152dBc/Hz, and -155dBc/Hz
Not Specified
±20ppm Minimum
±32ppm Minimum
±50ppm Minimum
±80ppm Minimum
±100ppm Minimum
±20% Maximum
±15% Maximum
±10% Maximum
1.65VDC ±1.35VDC (0.3VDC to 3.0VDC )
0.0VDC to VDD / Positive Transfer Characteristic
50kOhms Typical
10kHz Minimum (-3dB, VC = 1.65VDC)
ENVIRONMENTAL & MECHANICAL
Shock:
Vibration:
Seal Integrity:
Solderability:
Marking Permenancy:
Conditions
Conditions
Conditions
Conditions
Conditions
and Criteria
and Criteria
and Criteria
and Criteria
and Criteria
Listed in TQC41-883-007
Listed in TQC41-883-008
Listed in TQC41-883-003
Listed in TQC41-883-004 / 95% coverage
Listed in TQC41-883-001
PART NUMBERING GUIDE
7.00
±0.15
EV32C1 D 2 A 1 - 35.328M TR
5.08
±0.15
Packaging Options
Blank = Tubes (CPA74-004-000)
Frequency
TR = Tape & Reel
Duty Cycle
3
4
2.60
5.00
(CPA70-161-000)
1 = 50 ±10%
±0.15
±0.15
2 = 50 ±5%
2
1
Linearity
A = 20% Maximum, B = 15% Maximum,
C = 10% Maximum
1.4
1.2
Absolute Pull Range (APR)
±0.1
3.68
±0.2
1 = ±20ppm Minimum, 2 = ±32ppm Minimum
±0.15
3 = ±50ppm Minimum, 4 = ±80ppm Minimum
5 = ±100ppm Minimum
Frequency Tolerance & Stability / OTR
PIN
CONNECTION
A = Not Specified over 0°C to +70°C
1
Control Voltage (VC )
1.60 ±0.20
B = Not Specified over -40°C to +85°C
2 Ground/Case Ground
D = ±50ppm Max. over 0°C to +70°C
3
Output
E = ±25ppm Max. over 0°C to +70°C
4
Supply Voltage
All Dimensions In Millimeters
F = ±20ppm Max. over 0°C to +70°C
H = ±50ppm Max. over -40°C to +85°C
SPECIFICATION CONTROL DRAWING
J = ±25ppm Max. over -40°C to +85°C
Drawing Number
MARKING GUIDE
(Line #1) ECLIPTEK
(Line #2) XX.XXXM
Frequency
(Line #3) XX Y ZZ
CSC12-560-000
Title
ECLIPTEK
XX.XXXM
XXYZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Code (Per TEN02-001-000)
NOTE: Pin 1 shall be marked with a dot. Marking shall
conform to conditions listed in TQC41-001-000.
CERAMIC SMD 3.3V HCMOS/TTL VCXO
Revision
Effectivity Date
B
ECN Number
5632
Approved By
PAGE 1 OF 2
Date Released By
Date
Similar pages