ETC2 F64G-6AN-AP2 Olympian plus general purpose filter Datasheet

Back to Selector Page
F64G
Olympian Plus
General Purpose Filter
1/4", 3/8", 1/2", 3/4" Port Sizes
● Olympian Plus plug in design
● High efficiency water and particle removal
● Quick release bayonet bowl
● High visibility prismatic sight glass*
● Optional service indicator
* UK and other patents pending
Technical Data
Fluid: Compressed air
Maximum pressure:
Guarded transparent bowl: 10 bar (150 psig)
Metal bowl: 17 bar (250 psig)
Operating temperature*:
Guarded transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +80°C (0° to +175°F)
* Air supply must be dry enough to avoid ice formation at temperatures below +2°C
(+35°F).
Partical removal: 5 µm, 25 µm or 40 µm. Within ISO 8573-1,
Class 3 and Class 5
Typical flow at 6,3 bar (90 psig) inlet pressure and 0,5 bar (7 psig)
pressure drop:
5 µm element: 55 dm3/s (116 scfm)
40 µm element: 70 dm3/s (148 scfm)
Automatic drain connection: 1/8"
Automatic drain operating conditions:
Minimum pressure: 0,7 bar (10 psig). Drain opens when bowl
pressure drops below 0,2 bar (3 psig).
Minimum air flow: 1 dm3/s (2 scfm) required to close drain.
Nominal bowl size: 0,2 litre (7 fluid ounce)
Materials:
Body: Zinc
Yoke: Zinc
Metal bowl: Aluminium
Standard metal bowl prismatic liquid level
indicator lens: Grilamid
Optional metal bowl sight glass: Pyrex
Optional transparent bowl: Polycarbonate
Element: Sintered plastic
Elastomers: Synthetic rubber
Optional service life indicator:
Body: Transparent nylon.
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile
Ordering Information
See Ordering Information on the following
pages.
ISO Symbols
Automatic Drain
7/97
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Manual Drain
N/AL.8.240.100.01
F64G
Typical Performance Characteristics
bar g
psig
FLOW CHARACTERISTICS
PORT SIZE: 1/2"
40 µm ELEMENT
0,8
INLET PRESSURE - bar g (psig)
PRESSURE DROP
1
2,5
(36)
0,6
4,0
(58)
6,3
(91)
8,0 10,0
(116) (150)
8
6
0,4
4
0,2
2
0
0
0
0
20
40
40
80
60
120
80
100
160
200
dm3/s
240 scfm
AIR FLOW
Ordering Information. Models listed include ISO G threads, automatic drain, metal bowl, 40 µm element. Models do not include the
service life indicator.
Port Size
G1/4
G3/8
G1/2
G3/4
Model
F64G-2GN-AD3
F64G-3GN-AD3
F64G-4GN-AD3
F64G-6GN-AD3
Flow† dm3/s (scfm)
33 (70)
66 (140)
70 (148)
N.A.
Weight kg (lb)
1,42 (3.13)
1,42 (3.13)
1,32 (2.91)
1,72 (3.79)
† Typical flow with a 40 µm element at 6,3 bar (90 psig) inlet pressure and a 0,5 bar (7 psig) pressure drop.
For replacement Filter (without yoke) substitute ‘N’ at the 5th and 6th digits eg: F64G-NNN-AD3.
Alternative Models
F 6 4 G - ★ ★ ★ - ★★ ★
Port Size
1/4"
3/8"
1/2"
3/4"
Substitute
2
3
4
6
Element
5 µm
25 µm
40 µm
Substitute
1
2
3
Threads
PTF
ISO Rc taper
ISO G parallel
Substitute
A
B
G
Bowl
Metal with liquid level indicator
Transparent with guard
Closed bowl*
Substitute
D
P
E
Service Life Indicator
With
Without
Substitute
D
N
Drain
Manual
Auto drain
Substitute
M
A
* For vacuum use.
Accessories
Wall Mounting Bracket
Service Indicator
74504-50
Factory fit option only
See alternative models table
N/AL.8.240.100.02
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
7/97
F64G
Dimensions mm (inches)
208 (8.19)†
224 (8.82)†
201 (7.91)†
217 (8.54)†
37 (1.46)†
74 (2.91)
37 (1.46)
105 (4.13)*
† Minimum clearance required to remove bowl.
*
157 mm (6.18") for G3/4 models
Bracket Mounting
Bracket Kit Reference
Use 8 mm (5/16") screws to mount bracket to wall.
Part Number
74504-50
93 (3.66)
114 (4.49)
11 (0.43)
110 (4.33)
8,2 (0.32)
143 (5.63)
30,5 (1.20)
85 (3.35)
48 (1.89)
Item
Wall Bracket
14,5 (0.57)
Service Kits
Item
Service kit
Elements
Type
Seal and gasket
5 µm
25 µm
40 µm
Service Life Indicator
Liquid level lens kit
Replacement drains
Prismatic
Pyrex
Automatic
Manual
Part Number
4380-200
4338-01
4338-99
4338-02
5797-50
4380-040
4380-041
3000-97
684-84
Service kit includes port seals, louvre o-ring, bowl o-ring and drain gasket.
7/97
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
N/AL.8.240.100.03
F64G
Warning
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and
temperatures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid
power systems can fail in various modes. The system designer is warned
to consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products.
Water vapor will pass through these units and will condense into
liquid if air temperature drops in the downstream system. Install an air
dryer if water condensation could have a detrimental effect on the
application.
N/SH.8.240.100.04
Issue No.1 Revision 0
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
7/97
Similar pages