Hamamatsu A8406-55 Various types of cables for frame grabber Datasheet

IMAGE SENSOR
Frame grabber cables
A8406 series
Various types of cables for frame grabber
A flat panel sensor adopting parallel video output requires a frame grabber cable for transmitting the digital video data to a frame grabber
card installed in PC.
Frame grabber cables A8406 series are cables that connect the flat panel sensor to a frame grabber.
A8406 series have high performance and high reliability as digital video cables, and they are also designed for EMC conformity. The wires
are covered by double shielding and they have ferrite cores.
Refer to the datasheet for the flat panel sensor and choose a suitable cable for it.
■ Selection guide
Frame grabber
Cable type No.
Cable length
A8406-31
5m
A8406-36
7m
A8406-37
10 m
A8406-38
12 m
A8406-41
5m
A8406-46
7m
General-purpose
A8406-47
10 m
A8406-48
12 m
A8406-51
5m
A8406-56
7m
A8406-57
10 m
A8406-58
12 m
A8406-32
5m
A8406-33
7m
A8406-34
10 m
A8406-35
12 m
A8406-42
5m
A8406-43
7m
IMAQ PCI-1424 *1
A8406-44
10 m
IMAQ PCI-1422 *1
A8406-45
12 m
A8406-52
5m
A8406-53
7m
A8406-54
10 m
A8406-55
12 m
A8406-62
5m
A8406-64
10 m
*1: Made by NI (National Instrument Corporation)
*2: Made by JAE (Japan Aviation Electronics Industry, Limited)
*3: Made by Honda Tsushin Kogyo Co. Ltd.
*4: Made by 3M Co. Ltd.
Cable end
TX20A-36PH1-D2P1-D1E *2
PCS-E80FA *3
open
10140-6000EL *4
TX20A-36PH1-D2P1-D1E *2
PCS-E80FA *3
PCS-XE100MA+ *3
10140-6000EL *4
PCS-XE68MA+ *3
1
Frame grabber cables
Cable for general frame grabber
A8406 series
A8406-31/-36/-37/-38
A8406-31/-36/-37/-38 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 36-pin plug mating
with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame
grabber to be used.
■ Cable color coding and specifications
Pin No.
Signal
Cable color
Marking color Pin No.
Signal
Cable color
Marking color
1
Data12+ (MSB)
Blue
19
Data12- (MSB)
Orange
2
Data11+
Green
20
Data11Brown
3
Data10+
Gray
21
Data10Red
4
Data9+
Black
22
Data9Yellow
5
Data8+
Pink
23
Data8Purple
6
Data7+
White
24
Data7Blue
Red (1)
7
Data6+
Orange
White (1)
25
Data6Green
White (1)
8
Data5+
Brown
White (1)
26
Data5Gray
White (1)
9
Data4+
Red
White (1)
27
Data4Black
White (1)
10
Data3+
Yellow
Black (1)
28
Data3Pink
Black (1)
11
Data2+
Purple
White (1)
29
Data2White
Blue (1)
12
Data1+ (LSB)
Blue
Red (2)
30
Data1- (LSB)
Orange
White (2)
13
Reserved *5
Green
White (2)
31
GND
Brown
White (2)
14
Reserved *5
Gray
White (2)
32
GND
Red
White (2)
15
ExtTrgGrb (TTL)
Black
White (2)
33
IntExt (TTL)
Yellow
Black (2)
16
Vsync+
Pink
Black (2)
34
VsyncPurple
White (2)
17
Hsync+
White
Blue (2)
35
HsyncBlue
Black (1)
18
Pclk+
Orange
Black (1)
36
PclkGreen
Black (1)
Note) Numbers in parentheses of “Marking color” item show marking number.
*5: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor.
■ Dimensional outline (unit: mm)
a
36-PIN CABLE
FERRITE CORE
Cable type No.
a
A8406-31
5000 ± 140
A8406-36
A8406-37
A8406-38
7000 ± 140
10000 ± 200
12000 ± 200
18
36
1
19
TX20A-36PH1-D2P1-D1E
KACCA0096EC
2
Frame grabber cables
Cable for general frame grabber
A8406 series
A8406-41/-46/-47/-48
A8406-41/-46/-47/-48 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 80-pin plug mating
with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame
grabber to be used.
■ Cable color coding and specifications
Pin No.
Marking
Pin No.
Signal
color
41
B_Data1+ (LSB)
42
B_Data1- (LSB)
43
B_Data2+
44
B_Data245
B_Data3+
46
B_Data347
B_Data4+
48
B_Data449
B_Data5+
50
B_Data551
B_Data6+
Red (1)
52
B_Data6W hite (1)
53
B_Data7+
W hite (1)
54
B_Data7W hite (1)
55
B_Data8+
W hite (1)
56
B_Data8W hite (1)
57
B_Data9+
W hite (1)
58
B_Data9Black (1)
59
B_Data10+
Black (1)
60
B_Data10W hite (1)
61
B_Data11+
Blue (1)
62
B_Data11Red (2)
63
B_Data12+ * 6
W hite (2)
64
B_Data12- * 6
W hite (2)
65
B_Data13+
W hite (2)
66
B_Data13W hite (2)
67
B_Data14+ * 7
W hite (2)
68
B_Data14- * 7
W hite (2)
69
Reserved
Black (2)
70
Reserved
Black (2)
71
Reserved
W hite (2)
72
Reserved
Blue (2)
73
E xtTrgG rb (TTL)
Black (1)
74
Reserved
Black (1)
75
Reserved * 8
Black (1)
76
Reserved
Black (1)
77
Reserved * 8
Black (1)
78
Reserved
Black (1)
79
GND
Red (1)
80
GND
color” item show m arking num ber.
Signal
Cable color
Cable color
Marking color
1
A_Data1+ (LSB)
Blue
Pink
Red (1)
2
A_Data1- (LSB)
O range
Purple
Black (1)
3
A_Data2+
G reen
W hite
Black (1)
4
A_Data2Brown
Blue
Black (2)
5
A_Data3+
G ray
O range
Black (2)
6
A_Data3Red
G reen
Black (2)
7
A_Data4+
Black
Brown
Black (2)
8
A_Data4Yellow
G ray
Black (2)
9
A_Data5+
Pink
Red
Black (2)
10
A_Data5Purple
Yellow
Red (2)
11
A_Data6+
W hite
Pink
Red (2)
12
A_Data6Blue
Purple
Yellow (2)
13
A_Data7+
O range
W hite
Yellow (1)
14
A_Data7G reen
Blue
Yellow (1)
15
A_Data8+
Blown
O range
Yellow (1)
16
A_Data8G ray
G reen
Yellow (1)
17
A_Data9+
Red
Brown
Yellow (1)
18
A_Data9Black
G ray
Yellow (1)
19
A_Data10+
Yellow
Red
Yellow (1)
20
A_Data10Pink
Yellow
Blue (1)
21
A_Data11+
Purple
Pink
Yellow (1)
22
A_Data11W hite
Purple
Yellow (1)
23
A_Data12+ * 6
Blue
W hite
Yellow (2)
24
A_Data12- * 6
O range
Blue
O range (1)
25
A_Data13+
G reen
O range
Yellow (2)
26
A_Data13Brown
G reen
Yellow (2)
27
A_Data14+ * 7
G ray
Brown
Yellow (2)
28
A_Data14- * 7
Red
G ray
Yellow (2)
29
Reserved
Black
Red
O range (1)
30
Reserved
Yellow
Yellow
Blue (2)
31
Reserved
Pink
Pink
Yellow (2)
32
Reserved
Purple
Purple
Blue (2)
33
IntExt (TTL)
W hite
W hite
O range (1)
34
Reserved
Blue
Blue
O range (2)
35
Vsync+
O range
G reen
O range (1)
36
VsyncG reen
Brown
O range (1)
37
Hsync+
Brown
G ray
O range (1)
38
HsyncG ray
Red
O range (2)
39
Pclk+
Red
Pink
O range (1)
40
PclkYellow
Purple
O range (1)
Note) Num bers in parentheses of “Marking
*6: MSB for 12 bit
*7: MSB for 14bit
*8: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor.
■ Dimensional outline (unit: mm)
PCS-E80FA
a
80-PIN CABLE
FERRITE CORE
Cable type No.
a
A8406-41
A8406-46
A8406-47
A8406-48
5000 ± 140
7000 ± 140
10000 ± 200
12000 ± 200
1
41
40
80
PCS-E80LKPA
KACCA0138EB
3
Frame grabber cables
Cable for general frame grabber
A8406 series
A8406-51/-56/-57/-58
A8406-51/-56/-57/-58 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 40-pin plug mating
with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame
grabber to be used.
■ Cable color coding and specifications
Pin No.
Signal
Cable color
Marking color Pin No.
Signal
Cable color
Marking color
1
Data1+ (LSB)
Blue
21
Data1- (LSB)
Orange
2
Data2+
Green
22
Data2Brown
3
Data3+
Gray
23
Data3Red
4
Data4+
Black
24
Data4Yellow
5
Data5+
Pink
25
Data5Purple
6
Data6+
White
26
Data6Blue
Red (1)
7
Data7+
Orange
White (1)
27
Data7Green
White (1)
8
Data8+
Brown
White (1)
28
Data8Gray
White (1)
9
Data9+
Red
White (1)
29
Data9Black
White (1)
10
Data10+
Yellow
Black (1)
30
Data10Pink
Black (1)
11
Data11+
Purple
White (1)
31
Data11White
Blue (1)
12
Data12+ *9
Blue
Red (2)
32
Data12- *9
Orange
White (2)
13
Data13+
Brown
Black (1)
33
Data13Gray
Black (1)
14
Data14+ *10
Red
Black (1)
34
Data14- *10
Yellow
Red (1)
15
Reserved *11
Green
White (2)
35
GND
Brown
White (2)
16
Reserved *11
Gray
White (2)
36
GND
Red
White (2)
17
ExtTrgGrb (TTL)
Black
White (2)
37
IntExt (TTL)
Yellow
Black (2)
18
Vsync+
Pink
Black (2)
38
VsyncPurple
White (2)
19
Hsync+
White
Blue (2)
39
HsyncBlue
Black (1)
20
Pclk+
Orange
Black (1)
40
PclkGreen
Black (1)
Note) Numbers in parentheses of “Marking color” item show marking number.
Unless otherwise is not described, signal level is LVDS
*9: MSB for 12 bit
*10: MSB for 14 bit
*11: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor.
■ Dimensional outline (unit: mm)
10140-A200-00
a
40-PIN CABLE
20
40
1
21
FERRITE CORE
10140-60000EL
Cable type No.
a
A8406-51
5000 ± 140
A8406-56
7000 ± 140
A8406-57
A8406-58
10000 ± 200
12000 ± 200
KACCA0174EA
4
Frame grabber cables
Cable for IMAQ PCI-1424/ IMAQ PCI-1422 frame grabber
A8406 series
A8406-32/-33/-34/-35
A8406-32/-33/-34/-35 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and PCI-1422 digital frame
grabber board. Both ends of this cable have connectors. One end is a 36-pin plug mating with the flat panel sensor digital output receptacle, while
the other end is a 100-pin plug for the IMAQ PCI-1424 and PCI-1422.
■ Pin connection for A8406-32
TX20A-36PH1-D2P1-D1E
PCS-XE100MA+ TX20A-36PH1-D2P1-D1E
PCS-XE100MA+
Signal
Signal
Pin No.
Pin No.
Pin No.
Pin No.
1
Data12+ (MSB)
23
19
Data12- (MSB)
24
2
Data11+
21
20
Data1122
3
Data10+
19
21
Data1020
4
Data9+
17
22
Data918
5
Data8+
15
23
Data816
6
Data7+
13
24
Data714
7
Data6+
11
25
Data612
8
Data5+
9
26
Data510
9
Data4+
7
27
Data48
10
Data3+
5
28
Data36
11
Data2+
3
29
Data24
12
Data1+ (LSB)
1
30
Data1- (LSB)
2
13
Reserved *12
33
31
GND
99
14
Reserved *12
35
32
GND
100
15
ExtTrgGrb (TTL)
37
33
IntExt (TTL)
39
16
Vsync+
41
34
Vsync42
17
Hsync+
43
35
Hsync44
18
Pclk+
49
36
Pclk50
*12: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor.
Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The
compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets of the
flat panel sensors.
The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that
matches the output type of the flat panel sensor.
■ Dimensional outline (unit: mm)
PCS-XE100MA+
a
18
36
1
19
36-PIN CABLE
51
1
100
50
FERRITE CORE
TX20A-36PH1-D2P1-D1E
PCS-XEM100LU2
Cable type No.
a
A8406-32
A8406-33
5000 ± 140
7000 ± 140
A8406-34
A8406-35
10000 ± 200
12000 ± 200
KACCA0097EC
5
Frame grabber cables
Cable for IMAQ PCI-1424/ IMAQ PCI-1422 frame grabber
A8406 series
A8406-42/-43/-44/-45
A8406-42/-43/-44/-45 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital
frame grabber board. Both ends of this cable have connectors. One end is a 80-pin plug mating with the flat panel sensor digital output
receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422.
■ P in c o n n e c tio n fo r A 8 4 0 6 -4 2
P C S -E 8 0 FA
P C S -X E 1 0 0 M A +
P C S -E 8 0 FA
P C S -X E 1 0 0 M A +
S ig n a l
S ig n a l
P in N o .
P in N o .
P in N o .
P in N o .
1
A _ D a ta 1 + (L S B )
1
41
B _ D a ta 1 + (L S B )
51
2
A _ D a ta 1 - (L S B )
2
42
B _ D a ta 1 - (L S B )
52
3
A _ D a ta 2 +
3
43
B _ D a ta 2 +
53
4
A _ D a ta 2 4
44
B _ D a ta 2 54
5
A _ D a ta 3 +
5
45
B _ D a ta 3 +
55
6
A _ D a ta 3 6
46
B _ D a ta 3 56
7
A _ D a ta 4 +
7
47
B _ D a ta 4 +
57
8
A _ D a ta 4 8
48
B _ D a ta 4 58
9
A _ D a ta 5 +
9
49
B _ D a ta 5 +
59
10
A _ D a ta 5 10
50
B _ D a ta 5 60
11
A _ D a ta 6 +
11
51
B _ D a ta 6 +
61
12
A _ D a ta 6 12
52
B _ D a ta 6 62
13
A _ D a ta 7 +
13
53
B _ D a ta 7 +
63
14
A _ D a ta 7 14
54
B _ D a ta 7 64
15
A _ D a ta 8 +
15
55
B _ D a ta 8 +
65
16
A _ D a ta 8 16
56
B _ D a ta 8 66
17
A _ D a ta 9 +
17
57
B _ D a ta 9 +
67
18
A _ D a ta 9 18
58
B _ D a ta 9 68
19
A _ D a ta 1 0 +
19
59
B _ D a ta 1 0 +
69
20
A _ D a ta 1 0 20
60
B _ D a ta 1 0 70
21
A _ D a ta 11 +
21
61
B _ D a ta 11 +
71
22
A _ D a ta 11 22
62
B _ D a ta 11 72
23
A _ D a ta 1 2 + * 1 3
23
63
B _ D a ta 1 2 + * 1 3
73
24
A _ D a ta 1 2 - * 1 3
24
64
B _ D a ta 1 2 - * 1 3
74
25
A _ D a ta 1 3 +
25
65
B _ D a ta 1 3 +
75
26
A _ D a ta 1 3 26
66
B _ D a ta 1 3 76
14
14
27
A _ D a ta 1 4 + *
27
67
B _ D a ta 1 4 + *
77
28
A _ D a ta 1 4 - * 1 4
28
68
B _ D a ta 1 4 - * 1 4
78
29
R e s e rv e d
95
69
R e s e rv e d
97
30
R e s e rv e d
70
R e s e rv e d
31
R e s e rv e d
96
71
R e s e rv e d
98
32
R e s e rv e d
72
R e s e rv e d
33
In tE x t (T T L )
39
73
E xtTrg G rb ( T T L )
37
34
R e s e rv e d
40
74
R e s e rv e d
38
35
V sync+
41
75
R e s e rv e d * 1 5
33
36
V sync42
76
R e s e rv e d
34
15
37
H sync+
43
77
R e s e rv e d *
35
38
H sync44
78
R e s e rv e d
36
39
P c lk +
49
79
GND
99
40
P c lk 50
80
GND
100
*1 3 : M S B fo r 1 2 b it
*1 4 : M S B fo r 1 4 b it
*1 5 : T h e s ig n a ls c o n n e c te d to th e s e p in s d e p e n d o n e a c h d e v ic e s . R e fe r to th e d a ta s h e e t fo r th e fla t p a n e l s e n s o r.
N o te ) T h e IM A Q P C I-1 4 2 2 fr a m e g ra b b e r b o a rd m a y n o t b e c o m p a tib le w ith a fe w ty p e s o f H A M A M AT S U fla t p a n e l s e n s o rs . T h e
c o m p a tib ility s h o u ld b e a s k e d to N a tio n a l In s tru m e n ts C o rp o ra tio n (h ttp ://w w w.n i.c o m /) w ith re fe re n c e to d a ta s h e e ts o f th e
fla t p a n e l s e n s o rs .
T h e tw o ty p e s o f o u tp u t a re a v a ila b le w ith fla t p a n e l s e n s o rs : R S -4 2 2 a n d LV D S . S e le c t a d ig ita l fra m e g ra b b e r th a t
m a tc h e s th e o u tp u t ty p e o f th e fla t p a n e l s e n s o r.
■ Dimensional outline (unit: mm)
PCS-XE100MA+
PCS-E80LKPA
51
a
1
41
40
80
80-PIN CABLE
FERRITE CORE
100
PCS-E80FA
1
PCS-XEM100LU2
50
Cable type No.
a
A8406-42
A8406-43
5000 ± 140
7000 ± 140
A8406-44
A8406-45
10000 ± 200
12000 ± 200
KACCA0139EB
6
Frame grabber cables
Cable for IMAQ PCI-1424/ IMAQ PCI-1422 frame grabber
A8406 series
A8406-52/-53/-54/-55
A8406-52/-53/-54/-55 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital
frame grabber board. Both ends of this cable have connectors. One end is a 80-pin plug mating with the flat panel sensor digital output
receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422.
■ Pin connection for A8406-52
TX20A-36PH1-D2P1-D1
PCS-XE100MA+ TX20A-36PH1-D2P1-D1
PCS-XE100MA+
Signal
Signal
Pin No.
Pin No.
Pin No.
Pin No.
1
Data1+ (LSB)
1
21
Data1- (LSB)
2
2
Data2+
3
22
Data24
3
Data3+
5
23
Data36
4
Data4+
7
24
Data48
5
Data5+
9
25
Data510
6
Data6+
11
26
Data612
7
Data7+
13
27
Data714
8
Data8+
15
28
Data816
9
Data9+
17
29
Data918
10
Data10+
19
30
Data1020
11
Data11+
21
31
Data1122
12
Data12+ *16
23
32
Data12- *16
24
13
Data13+
25
33
Data1326
14
Data14+ *17
27
34
Data14- *17
28
15
Reserved *18
33
35
GND
99
16
Reserved *18
35
36
GND
100
17
ExtTrgGrb (TTL)
37
37
IntExt (TTL)
39
18
Vsync+
41
38
Vsync42
19
Hsync+
43
39
Hsync44
20
Pclk+
49
40
Pclk50
*16: MSB for 12 bit
*17: MSB for 14 bit
*18: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor.
Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors.
The compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets
of the flat panel sensors.
The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that
matches the output type of the flat panel sensor.
■ Dimensional outline (unit: mm)
PCS-XE100MA+
a
20
40
1
21
51
1
100
50
40-PIN CABLE
10140-60000EL
PCS-XEM100LU2
Cable type No.
a
A8406-52
A8406-53
A8406-54
5000 ± 140
7000 ± 140
10000 ± 200
A8406-55
12000 ± 200
KACCA0175EA
7
Frame grabber cables
Cable for IMAQ PCI-1424/IMAQ PCI-1422 frame grabber
A8406 series
A8406-62/-64
A8406-62/-64 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame
grabber board. Both ends of this cable have connectors. One end is a 68-pin plug mating with the flat panel sensor digital output receptacle, while
the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422.
■ P in c o n n e c tio n fo r A 8 4 0 6 - 6 2 /- 6 4
P C S -X E 6 8 M A +
P C S -X E 1 0 0 M A +
P C S -X E 6 8 M A +
P C S -X E 1 0 0 M A +
S ig n a l
S ig n a l
P in N o .
P in N o .
P in N o .
P in N o .
1
A _ D a ta 1 + (L S B )
1
35
A _ D a ta 1 - (L S B )
2
2
A _ D a ta 2 +
3
36
A _ D a ta 2 4
3
A _ D a ta 3 +
5
37
A _ D a ta 3 6
4
A _ D a ta 4 +
7
38
A _ D a ta 4 8
5
A _ D a ta 5 +
9
39
A _ D a ta 5 10
6
A _ D a ta 6 +
11
40
A _ D a ta 6 12
7
A _ D a ta 7 +
13
41
A _ D a ta 7 14
8
A _ D a ta 8 +
15
42
A _ D a ta 8 16
9
A _ D a ta 9 +
17
43
A _ D a ta 9 18
10
A _ D a ta 1 0 +
19
44
A _ D a ta 1 0 20
11
A _ D a ta 11 +
21
45
A _ D a ta 11 22
12
A _ D a ta 1 2 +
23
46
A _ D a ta 1 2 24
13
A _ D a ta 1 3 + * 1 9
25
47
A _ D a ta 1 3 - * 1 9
26
2
0
2
0
14
A _ D a ta 1 4 + *
27
48
A _ D a ta 1 4 - *
28
15
B _ D a ta 1 + (L S B )
51
49
B _ D a ta 1 - (L S B )
52
16
B _ D a ta 2 +
53
50
B _ D a ta 2 54
17
B _ D a ta 3 +
55
51
B _ D a ta 3 56
18
B _ D a ta 4 +
57
52
B _ D a ta 4 58
19
B _ D a ta 5 +
59
53
B _ D a ta 5 60
20
B _ D a ta 6 +
61
54
B _ D a ta 6 62
21
B _ D a ta 7 +
63
55
B _ D a ta 7 64
22
B _ D a ta 8 +
65
56
B _ D a ta 8 66
23
B _ D a ta 9 +
67
57
B _ D a ta 9 68
24
B _ D a ta 1 0 +
69
58
B _ D a ta 1 0 70
25
B _ D a ta 11 +
71
59
B _ D a ta 11 72
26
B _ D a ta 1 2 +
73
60
B _ D a ta 1 2 74
27
B _ D a ta 1 3 + * 1 9
75
61
B _ D a ta 1 3 - * 1 9
76
28
B _ D a ta 1 4 + * 2 0
77
62
B _ D a ta 1 4 - * 2 0
78
29
R e s e rv e d * 2 1
33
63
GND
99
30
R e s e rv e d * 2 1
35
64
GND
100
31
E x tT rg G rb ( T T L )
37
65
In tE x t (T T L )
39
32
V sync+
41
66
V sync42
33
H sync+
43
67
H sync44
34
P c lk +
49
68
P c lk 50
* 1 9 : M S B fo r 1 3 b it
* 2 0 : M S B fo r 1 4 b it
* 2 1 : T h e s ig n a ls c o n n e c te d to th e s e p in s d e p e n d o n e a c h d e v ic e s . R e fe r to th e d a ta s h e e t fo r th e fla t p a n e l s e n s o r.
N o te : T h e IM A Q P C I-1 4 2 2 fra m e g ra b b e r b o a rd m a y n o t b e c o m p a tib le w ith a fe w ty p e s o f H A M A M A T S U fla t p a n e l s e n s o rs .
T h e c o m p a tib ility s h o u ld b e a s k e d to N a tio n a l In s tru m e n ts C o rp o ra tio n (h ttp ://w w w .n i.c o m /) w ith re fe re n c e to d a ta s h e e ts
o f th e fla t p a n e l s e n s o rs .
T h e tw o t y p e s o f o u tp u t a re a v a ila b le w ith fla t p a n e l s e n s o rs : R S -4 2 2 a n d LV D S . S e le c t a d ig ita l fra m e g ra b b e r th a t
m a tc h e s th e o u tp u t ty p e o f th e fla t p a n e l s e n s o r.
■ Dimensional outline (unit: mm)
PCS-XE100MA+
PCS-E68LKPB
a
34
68
1
35
68-PIN CABLE
PCS-XE68MA+
51
1
100
50
FERRITE CORE
PCS-XEM100LU2
Cable Type No.
a
A8406-62
5000 ± 140
A8406-64
10000 ± 200
KACCA0226EB
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
8
Cat. No. KACC1123E02
Oct. 2007 DN
Similar pages