NXP BAT760 Medium power schottky barrier single diode Datasheet

BAT760
Medium power Schottky barrier single diode
Rev. 03 — 17 October 2008
Product data sheet
1. Product profile
1.1 General description
Planar medium power Schottky barrier single diode with an integrated guard ring for
stress protection, encapsulated in a SOD323 (SC-76) very small Surface-Mounted
Device SMD plastic package.
1.2 Features
n
n
n
n
Ultra high-speed switching
Very low forward voltage
Guard-ring protected
Very small SMD plastic package
1.3 Applications
n Ultra high-speed switching
n Voltage clamping
n Protection circuits
1.4 Quick reference data
Table 1.
Quick reference data
Symbol
Parameter
VR
IF
VF
[1]
Min
Typ
Max
Unit
reverse voltage
-
-
20
V
forward current
-
-
1
A
-
480
550
mV
forward voltage
Pulse test: tp ≤ 300 µs; δ ≤ 0.02.
Conditions
IF = 1 A
[1]
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
2. Pinning information
Table 2.
Pinning
Pin
Description
1
cathode
2
anode
Simplified outline
Graphic symbol
[1]
1
1
2
2
sym001
[1]
The marking bar indicates the cathode.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
BAT760
SC-76
plastic surface-mounted package; 2 leads
SOD323
Table 4.
Marking codes
4. Marking
Type number
Marking code
BAT760
A4
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VR
reverse voltage
IF
forward current
IFSM
non-repetitive peak
forward current
Tj
Tamb
Tstg
Max
Unit
-
20
V
-
1
A
-
5
A
junction temperature
-
125
°C
ambient temperature
−65
+125
°C
storage temperature
−65
+150
°C
tp = 8.3 ms;
half-sine wave;
JEDEC method
BAT760_3
Product data sheet
Min
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
2 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Conditions
Rth(j-a)
thermal resistance from
junction to ambient
in free air
Min
Typ
Max
Unit
[1]
-
-
220
K/W
[2]
-
-
180
K/W
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated, mounting pad for
cathode 10 × 10 mm2.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 40 × 40 mm2.
7. Characteristics
Table 7.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
VF
Parameter
Conditions
Min
Typ
Max
Unit
IF = 10 mA
-
240
270
mV
IF = 100 mA
-
300
350
mV
-
480
550
mV
VR = 5 V
-
5
10
µA
VR = 8 V
-
7
20
µA
VR = 15 V
-
10
50
µA
VR = 5 V; f = 1 MHz
-
19
25
pF
[1]
forward voltage
IF = 1 A
IR
Cd
[1]
[1]
reverse current
diode capacitance
Pulse test: tp ≤ 300 µs; δ ≤ 0.02.
BAT760_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
3 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
mld562
103
mld563
105
IR
(µA)
IF
(mA)
(1)
104
102
(2)
103
(1)
(2)
(3)
10
102
(3)
1
10
10−1
0
0.2
0.4
VF (V)
1
0.6
0
5
(1) Tamb = 125 °C
(1) Tamb = 125 °C
(2) Tamb = 85 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(3) Tamb = 25 °C
Fig 1.
Forward current as a function of forward
voltage; typical values
Fig 2.
10
15
20
VR (V)
25
Reverse current as a function of reverse
voltage; typical values
mld564
80
Cd
(pF)
60
40
20
0
0
5
10
20
15
VR (V)
f = 1 MHz; Tamb = 25 °C
Fig 3.
Diode capacitance as a function of reverse voltage; typical values
BAT760_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
4 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
8. Package outline
1.35
1.15
1.1
0.8
0.45
0.15
1
2.7
2.3
1.8
1.6
2
0.40
0.25
Dimensions in mm
Fig 4.
0.25
0.10
03-12-17
Package outline SOD323 (SC-76)
9. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
BAT760
[1]
Package
SOD323
Description
4 mm pitch, 8 mm tape and reel
3000
10000
-115
-135
For further information and the availability of packing methods, see Section 13.
BAT760_3
Product data sheet
Packing quantity
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
5 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
10. Soldering
3.05
2.1
solder lands
solder resist
0.5 (2×)
1.65 0.95
0.6 (2×)
solder paste
occupied area
2.2
Dimensions in mm
0.5
(2×)
0.6
(2×)
Fig 5.
sod323_fr
Reflow soldering footprint SOD323 (SC-76)
5
2.9
1.5 (2×)
solder lands
solder resist
occupied area
2.75
1.2
(2×)
Dimensions in mm
preferred transport
direction during soldering
sod323_fw
Fig 6.
Wave soldering footprint SOD323 (SC-76)
BAT760_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
6 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
11. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAT760_3
20081017
Product data sheet
-
BAT760_2
Modifications:
•
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Table 1 “Quick reference data”: added
Figure 4: superseded by minimized package outline drawing
Section 9 “Packing information”: added
Section 10 “Soldering”: added
Section 12 “Legal information”: updated
BAT760_2
20040126
Product specification
-
BAT760_1
BAT760_1
20010312
Product specification
-
-
BAT760_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
7 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BAT760_3
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 03 — 17 October 2008
8 of 9
BAT760
NXP Semiconductors
Medium power Schottky barrier single diode
14. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . .
General description. . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick reference data. . . . . . . . . . . . . . . . . . . . .
Pinning information . . . . . . . . . . . . . . . . . . . . . .
Ordering information . . . . . . . . . . . . . . . . . . . . .
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal characteristics. . . . . . . . . . . . . . . . . . .
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . .
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .
Packing information. . . . . . . . . . . . . . . . . . . . . .
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .
Legal information. . . . . . . . . . . . . . . . . . . . . . . .
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information. . . . . . . . . . . . . . . . . . . . . .
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
2
2
2
2
3
3
5
5
6
7
8
8
8
8
8
8
9
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2008.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 17 October 2008
Document identifier: BAT760_3
Similar pages