Kingbright AP2012CGCK 2.0x1.25mm smd chip led lamp Datasheet

2.0x1.25mm SMD CHIP LED LAMP
Part Number: AP2012CGCK
Features
Description
z2.0mmx1.25mm
zLOW
SMT LED,1.1mm THICKNESS.
POWER CONSUMPTION.
zWIDE
zIDEAL
The Green source color devices are made with InGaAlP on
GaAs substrate Light Emitting Diode.
VIEWING ANGLE.
FOR BACKLIGHT AND INDICATOR.
zVARIOUS
COLORS AND LENS TYPES AVAILABLE.
zPACKAGE
: 2000PCS / REEL.
zMOISTURE
zRoHS
GREEN
SENSITIVITY LEVEL : LEVEL 3.
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAA6049
REV NO: V.10
DATE: JUL/08/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
PAGE: 1 OF 5
ERP: 1203000095
Selection Guide
Dice
Part No.
AP2012CGCK
Iv (mcd) [2]
@ 20mA
Lens Type
GREEN (InGaAIP)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
10
40
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
574
nm
IF=20mA
Green
570
nm
IF=20mA
Spectral Line Half-width
Green
20
nm
IF=20mA
C
Capacitance
Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA6049
REV NO: V.10
DATE: JUL/08/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
PAGE: 2 OF 5
ERP: 1203000095
Green
AP2012CGCK
SPEC NO: DSAA6049
REV NO: V.10
DATE: JUL/08/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
PAGE: 3 OF 5
ERP: 1203000095
AP2012CGCK
Recommended Soldering Pattern
(Units: mm ; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAA6049
REV NO: V.10
DATE: JUL/08/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
PAGE: 4 OF 5
ERP: 1203000095
PACKING & LABEL SPECIFICATIONS
AP2012CGCK
SPEC NO: DSAA6049
REV NO: V.10
DATE: JUL/08/2006
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
PAGE: 5 OF 5
ERP: 1203000095
Similar pages