AZ955 SUBMINIATURE PC BOARD RELAY FEATURES • • • • • • • Subminiature size for high density packaging DIL pitch terminals Epoxy sealed for automatic wave soldering High sensitivity: 150 mW nominal with 84 mW pickup Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL file E43203; CSA file LR 702514 GENERAL DATA CONTACTS Arrangement SPDT (1 Form C) Bifurcated crossbar contacts Ratings Light Duty Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1 A Max. switched voltage: 60 VDC or 125 VAC UL Rating: 1 A at 30 VDC 0.3 A at 60 VDC 0.5 A at 125 VAC Material Silver alloy, gold clad Resistance < 100 milliohms initially Standard coil:113 mW Sensitive coil: 84 mW Max. Continuous Dissipation .5 W at 20°C (68°F) ambient Temperature Rise Standard: 33°C (59°F) at nominal coil voltage Sensitive: 25°C (45°F) at nominal coil voltage Temperature Max. 105°C (221°F) NOTES 1. 2. 3. 4. Minimum operations 10 million operations 1 x 105 at rated load Operate Time (typical) Standard: 3 ms at nominal coil voltage Sensitive: 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppression) Capacitance Coil to contact: 3.0 pF Contact to contact: 3.0 pF Bounce (typical) At 10 mA contact current 2 ms at operate 8 ms at release Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 500 Vrms between open contacts Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric COIL Power At Pickup Voltage (typical) Life Expectancy Mechanical Electrical All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Other coil resistances and sensitivities available upon request. Specifications subject to change without notice. ZETTLER Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -40°C (-40°F) to 70°C (158°F) Sensitive: -40°C (-40°F) to 80°C (176°F) Both: -25°C (-13°F) to 105°C (221°F) Storage Vibration 0.039" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Immersion Time 30 seconds Weight 1.8 grams electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000-10-04 AZ955 RELAY ORDERING DATA COIL SPECIFICATIONS: STANDARD COIL Nominal Coil VDC 1.5 Must. Operate VDC 1.1 Max. Continuous VDC 2.4 Coil Resistance ±10% 11.3 45.0 ORDER NUMBER AZ955-1C-1.5DE 3 2.3 4.7 AZ955-1C-3DE 5 3.8 7.9 125 6 4.5 9.5 180 AZ955-1C-6DE 9 6.8 14.2 405 AZ955-1C-9DE AZ955-1C-5DE 12 9.0 19.0 720 AZ955-1C-12DE 24 18.0 37.9 2880 AZ955-1C-24DE COIL SPECIFICATIONS: SENSITIVE COIL Nominal Coil VDC 1.5 Must. Operate VDC 1.1 Max. Continuous VDC 2.7 Coil Resistance ±10% 15.0 5.5 60.0 ORDER NUMBER AZ955-1C-1.5DSE 3 2.3 AZ955-1C-3DSE 5 3.8 9.1 167 AZ955-1C-5DSE 6 4.5 11.0 240 AZ955-1C-6DSE 9 6.8 16.4 540 AZ955-1C-9DSE 12 9.0 21.9 960 AZ955-1C-12DSE 24 18.0 43.8 3840 AZ955-1C-24DSE MECHANICAL DATA .472 [12.0] PC BOARD LAYOUT Viewed toward terminals .291 [7.4] .300 [7.6] .100 [2.5] .385 [9.8] .033 [0.84] .045 [1.15] .200 [5.1] .020 [0.5] .100 [2.5] .300 [7.6] .138 [3.5] TYP .200 [5.1] 2xø.016 [ø0.4] 4xø.032 [ø0.8] 2xø.024 [ø0.6] WIRING DIAGRAM Viewed toward terminals 1 2 5 10 9 6 4x.020 [0.5] 4x.008 [0.2] Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000-10-04