EPCOS B37931K5153K060 Multilayer ceramic capacitor Datasheet

Multilayer ceramic capacitor
X7R
Series/Type:
Chip
Ordering code: B37921...
Date:
2005-12-05
Content of inside pages of data sheet. Data will be automatically entered into headers and
footers. Please fill in the table and then change the colour to “White”. This ensures that the
table disappears for the customer pdf.
Identification/Classification 1: (header 1)
Multilayer ceramic capacitor
Identification/Classification 2: (header 2)
HighCV, X7R 1206 50 V
Ordering code:
B37872K5105K0**
Series/Type:
Chip
Preliminary data (optional): (if necessary)
Department:
KB VS PE
Date:
25.10.2005
Prepared by:
Release signed PE:
Release signed QS:
Modifications/Remarks:
Mr. Huainig
Dr. Engel
Dr. Slakhorst
xx
xx
xx
© EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Chip
Multilayer ceramic capacitors
X7R
Features
■
■
■
■
High volumetric efficiency
Non-linear capacitance change
High insulation resistance
High pulse strength
Applications
■ Blocking and coupling
■ Decoupling
■ Interference suppression
Termination
■ For soldering: Nickel-barrier termination (Ni) for case sizes 0402 to 1210
Silver-palladium termination (AgPd) for case sizes 1812 and 2220
(capacitance values ≤1 μF)
■ For conductive adhesion: Silver-palladium termination (AgPd) for all case sizes on request
Options
■ Alternative capacitance tolerances available on request
Delivery mode
■ Cardboard and blister tape (blister tape for chip thickness ≥1.2 ±0.1 mm and case sizes ≥1210),
180-mm and 330-mm reel available
■ Bulk case for case sizes 0603 (16 V, 25 V, 50 V) and 0805 (50 V)
Electrical data
Temperature characteristic
Climatic category (IEC 60068-1)
Standard
Dielectric
Rated voltage1)
Test voltage
Capacitance range2) / E series
Max. relative capacitance change
Dissipation factor (limit value)
VR
Vtest
CR
ΔC/C
tan δ
Insulation resistance 3) at + 25 °C
Insulation resistance 3) at +125 °C
Time constant 3) at + 25 °C
Time constant 3) at +125 °C
Operating temperature range
Ageing 4)
Rins
Rins
τ
τ
Top
1) Note: No operation on AC line.
2) See also HighCap series in data book or Internet
Please read Cautions and warnings and
2
Important notes at the end of this document.
2
X7R
55/125/56
EIA
Class 2
10, 16, 25, 50,100, 200, 500
2.5 · VR/5 s
100 pF … 1 µF (E3/E6)
±15
<25 · 10 –3
<35 · 10 –3 for 16 V
>105
>104
>1000
>100
–55 … +125
yes
VDC
VDC
%
MΩ
MΩ
s
s
°C
3) For C R >10 nF the time constant τ = C · Rins is given.
4) Refer to data book 2003 “General Techn. Inform.”, page 197.
2
12/0505
Multilayer ceramic capacitors
X7R
X7R
Capacitance tolerances
Code letter
J
K
M
(standard)
Tolerance
±5%
±10%
±20%
Dimensional drawing
s
b
k
k
KKE0329-N
Dimensions (mm)
Case size
0402
1005
0603
1608
0805
2012
1206
3216
l
1.0 ±0.10
1.6 ±0.15
2.0 ±0.20
3.2 ±0.20
b
0.5 ±0.05
0.8 ±0.10
1.25 ±0.15
1.6 ±0.15
s
0.5 ±0.05
0.8 ±0.10
1.35 max.
1.30 max.
k
0.1 –0.4
0.1 –0.4
0.13 –0.75
0.25 –0.75
1210
3225
1812
4532
2220
5750
l
3.2 ±0.30
4.5 ±0.30
5.7 ±0.40
b
2.5 ±0.30
3.2 ±0.30
5.0 ±0.40
s
1.70 max.
1.30 max.
1.30 max.
k
0.25 –0.75
0.25 –1.0
0.25 –1.0
Case size
(inch)
(mm)
(inch)
(mm)
Tolerances to CECC 32101-801
Please read Cautions and warnings and
Important notes at the end of this document.
3
12/05
Multilayer ceramic capacitors
X7R
X7R
Recommended solder pad
C
A
D
KKE0308-1
Maximum dimensions (mm)
Case size
(inch/mm)
Type
A
C
D
0402/1005
single chip
0.6
1.7
0.6
0603/1608
single chip
1.0
3.0
1.0
0805/2012
single chip
1.2
3.4
1.3
1206/3216
single chip
1.2
4.5
1.8
1210/3225
single chip
1.2
4.5
2.8
1812/4532
single chip
1.5
6.0
3.6
2220/5750
single chip
1.5
7.2
5.5
Termination
Termination
(nickel barrier)
Ceramic body
Inner electrode
NME
AgPd
BME
Ni
Substrate electrode
Intermediate electrode
External electrode
NME
Ag
Ni
Sn
BME
Cu
Ni
Sn
NME: Noble Metal Electrode
BME: Base Metal Electrode
KKE0485-5-E
Please read Cautions and warnings and
Important notes at the end of this document.
4
12/05
Multilayer ceramic capacitors
X7R
X7R
Product range chip capacitors
X7R
Size1)
inch
mm
Type
VR (VDC)
CR
100
pF
150
pF
220
pF
330
pF
470
pF
680
pF
10
0402
1005
0603
1608
B37921
B37931
16
25
50
10
16
25
50
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10
nF
15
nF
22
nF
33
nF
47
nF
68
nF
100
nF
150
nF
220
nF
2)
2)
1) l × b (inch) / l × b (mm)
2) See HighCV product range.
Please read Cautions and warnings and
Important notes at the end of this document.
5
12/05
2)
100
Multilayer ceramic capacitors
X7R
X7R
Product range chip capacitors
X7R
Size1)
inch
mm
Type
VR (VDC)
CR
100
pF
220
pF
330
pF
470
pF
680
pF
820
pF
16
0805
2012
1206
3216
B37941
B37872
25
50
100
200
16
25
50
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10
nF
15
nF
22
nF
33
nF
47
nF
68
nF
100
nF
150
nF
220
nF
2)
2)
330
nF
2)
2)
470
nF
2)
2)
1.0 μF
2)
2)
2)
2.2 μF
2)
2)
2)
2)
1) l × b (inch) / l × b (mm)
2) See HighCV product range.
Please read Cautions and warnings and
Important notes at the end of this document.
6
12/05
2)
100
200
500
Multilayer ceramic capacitors
X7R
X7R
Product range chip capacitors
X7R
Size1)
inch
mm
Type
VR (VDC)
CR
25
50
1210
3225
1812
4532
2220
5750
B37950
B37953
B37956
50
50
100
200
1.0 nF
1.5 nF
2.2 nF
3.3 nF
3.9 nF
4.7 nF
6.8 nF
10
nF
15
nF
22
nF
33
nF
47
nF
68
nF
100
nF
150
nF
220
nF
330
nF
470
nF
1) l × b (inch) / l × b (mm)
2) See HighCV product range.
Please read Cautions and warnings and
Important notes at the end of this document.
7
12/05
500
Multilayer ceramic capacitors
X7R
X7R; 0402
Ordering codes and packing for X7R, 10, 16, 25 and 50 VDC, nickel-barrier terminations
Chip thickness
CR1)
Ordering code 2)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape,
∅ 330-mm reel
** ^ 70
pcs./reel
0.5 ± 0.05
0.5 ± 0.05
10000
10000
50000
50000
0.5 ± 0.05
0.5 ± 0.05
10000
10000
50000
50000
0.5 ± 0.05
0.5 ± 0.05
10000
10000
50000
50000
0.5 ± 0.05
0.5 ± 0.05
0.5 ± 0.05
0.5 ± 0.05
0.5 ± 0.05
10000
10000
10000
10000
10000
50000
50000
50000
50000
50000
Case size 0402, 10 VDC
33, nF
47. nF
B37921K8333K0**
B37921K8473K0**
Case size 0402, 16 VDC
10, nF
22. nF
B37921K9103K0**
B37921K9223K0**
Case size 0402, 25 VDC
4.7 nF
6.8 nF
B37921K0472K0**
B37921K0682K0**
Case size 0402, 50 VDC
220. pF
470. pF
1.0 nF
2.2 nF
3.3 nF
B37921K5221K0**
B37921K5471K0**
B37921K5102K0**
B37921K5222K0**
B37921K5332K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
Please read Cautions and warnings and
Important notes at the end of this document.
8
12/05
Multilayer ceramic capacitors
X7R
X7R; 0603
Ordering codes and packing for X7R, 16 and 25 VDC, nickel-barrier terminations
Chip
thickness
Ordering code 2)
CR1)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape, Bulk case
∅ 330-mm reel
** ^ 70
** ^ 01
pcs./reel
pcs.
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
15000
15000
15000
15000
15000
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
15000
15000
15000
15000
15000
15000
15000
Case size 0603, 16 VDC
22,
33.
47.
68.
100.
nF
nF
nF
nF
nF
B37931K9223K0**
B37931K9333K0**
B37931K9473K0**
B37931K9683K0**
B37931K9104K0**
Case size 0603, 25 VDC
10.
15.
22.
33.
47.
68.
100.
nF
nF
nF
nF
nF
nF
nF
B37931K0103K0**
B37931K0153K0**
B37931K0223K0**
B37931K0333K0**
B37931K0473K0**
B37931K0683K0**
B37931K0104K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
Please read Cautions and warnings and
Important notes at the end of this document.
9
12/05
Multilayer ceramic capacitors
X7R
X7R; 0603
Ordering codes and packing for X7R, 50 and 100 VDC, nickel-barrier terminations
Chip
thickness
CR1)
Ordering code 2)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape, Bulk case
∅ 330-mm reel
** ^ 70
** ^ 01
pcs./reel
pcs.
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
15000
15000
15000
15000
15000
15000
15000
15000
15000
15000
15000
15000
15000
15000
15000
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
–
–
–
–
–
–
–
–
–
–
–
Case size 0603, 50 VDC
220. pF
330. pF
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
B37931K5221K0**
B37931K5331K0**
B37931K5471K0**
B37931K5681K0**
B37931K5102K0**
B37931K5152K0**
B37931K5222K0**
B37931K5332K0**
B37931K5472K0**
B37931K5682K0**
B37931K5103K0**
B37931K5153K0**
B37931K5223K0**
B37931K5333K0**
B37931K5473K0**
Case size 0603, 100 VDC
100. pF
150. pF
220. pF
330. pF
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37931K1101K0**
B37931K1151K0**
B37931K1221K0**
B37931K1331K0**
B37931K1471K0**
B37931K1681K0**
B37931K1102K0**
B37931K1152K0**
B37931K1222K0**
B37931K1332K0**
B37931K1472K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
Please read Cautions and warnings and
Important notes at the end of this document.
10
12/05
Multilayer ceramic capacitors
X7R
X7R; 0805
Ordering codes and packing for X7R, 25 and 50 VDC, nickel-barrier terminations
Chip
thickness
CR1)
Ordering code 2)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape, Bulk case
∅ 330-mm reel
** ^ 70
** ^ 01
pcs./reel
pcs.
1.25 ± 0.1
30003)
12000 4)
–
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.8 ± 0.1
1.25 ± 0.1
0.8 ± 0.1
1.25 ± 0.1
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
4000
3000 3)
4000
3000 3)
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
16000
12000 4)
16000
12000 4)
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
–
–
–
–
Case size 0805, 25 VDC
100, nF
B37941K0104K0**
Case size 0805, 50 VDC
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
68. nF
68. nF
100. nF
100. nF
B37941K5471K0**
B37941K5681K0**
B37941K5102K0**
B37941K5152K0**
B37941K5222K0**
B37941K5332K0**
B37941K5472K0**
B37941K5682K0**
B37941K5103K0**
B37941K5153K0**
B37941K5223K0**
B37941K5333K0**
B37941K5473K0**
B37941K5683K0**
B37941K5683K0**
B37941K5104K0**
B37941K5104K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
3) Blister tape, 180-mm reel, ordering code ** ^ 62
4) Blister tape, 330-mm reel, ordering code ** ^ 72
Please read Cautions and warnings and
Important notes at the end of this document.
11
12/05
Multilayer ceramic capacitors
X7R
X7R; 0805
Ordering codes and packing for X7R, 100 and 200 VDC, nickel-barrier terminations
Chip
thickness
CR1)
Ordering code 2)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape,
∅ 330-mm reel
** ^ 70
pcs./reel
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.6 ± 0.1
0.8 ± 0.1
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
4000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
16000
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
4000
4000
4000
4000
3000 3)
3000 3)
16000
16000
16000
16000
16000
16000
16000
16000
12000 4)
12000 4)
Case size 0805, 100 VDC
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
B37941K1471K0**
B37941K1681K0**
B37941K1102K0**
B37941K1152K0**
B37941K1222K0**
B37941K1332K0**
B37941K1472K0**
B37941K1682K0**
B37941K1103K0**
B37941K1153K0**
B37941K1223K0**
Case size 0805, 200 VDC
220. pF
330. pF
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
B37941K2221K0**
B37941K2331K0**
B37941K2471K0**
B37941K2681K0**
B37941K2102K0**
B37941K2152K0**
B37941K2222K0**
B37941K2332K0**
B37941K2472K0**
B37941K2682K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
3) Blister tape, 180-mm reel, ordering code ** ^ 62
4) Blister tape, 330-mm reel, ordering code ** ^ 72
Please read Cautions and warnings and
Important notes at the end of this document.
12
12/05
Multilayer ceramic capacitors
X7R
X7R; 1206
Ordering codes and packing for X7R, 50 and 100 VDC, nickel-barrier terminations
Chip thickness
CR1)
Ordering code 2)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape,
∅ 330-mm reel
** ^ 70
pcs./reel
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
30003)
30003)
30003)
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
12000 4)
12000 4)
12000 4)
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
3000 3)
3000 3)
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
12000 4)
12000 4)
Case size 1206, 50 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
68. nF
100. nF
220. nF
330. nF
470. nF
B37872K5102K0**
B37872K5152K0**
B37872K5222K0**
B37872K5332K0**
B37872K5472K0**
B37872K5682K0**
B37872K5103K0**
B37872K5153K0**
B37872K5223K0**
B37872K5333K0**
B37872K5473K0**
B37872K5683K0**
B37872K5104K0**
B37872K5224K0**
B37872K5334K0**
B37872K5474K0**
Case size 1206, 100 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
68. nF
100. nF
B37872K1102K0**
B37872K1152K0**
B37872K1222K0**
B37872K1332K0**
B37872K1472K0**
B37872K1682K0**
B37872K1103K0**
B37872K1153K0**
B37872K1223K0**
B37872K1333K0**
B37872K1473K0**
B37872K1683K0**
B37872K1104K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
3) Blister tape, 180-mm reel, ordering code ** ^ 62
4) Blister tape, 330-mm reel, ordering code ** ^ 72
Please read Cautions and warnings and
Important notes at the end of this document.
13
12/05
Multilayer ceramic capacitors
X7R
X7R; 1206
Ordering codes and packing for X7R, 200 and 500 VDC, nickel-barrier terminations
Chip thickness
CR1)
Ordering code 2)
mm
Cardboard tape,
∅ 180-mm reel
** ^ 60
pcs./reel
Cardboard tape,
∅ 330-mm reel
** ^ 70
pcs./reel
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
4000
4000
4000
4000
3000 3)
3000 3)
16000
16000
16000
16000
16000
16000
16000
16000
12000 4)
12000 4)
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
4000
3000 3)
3000 3)
16000
16000
16000
16000
16000
12000 4)
12000 4)
Case size 1206, 200 VDC
820. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
B37872K2821K0**
B37872K2102K0**
B37872K2152K0**
B37872K2222K0**
B37872K2332K0**
B37872K2472K0**
B37872K2682K0**
B37872K2103K0**
B37872K2153K0**
B37872K2223K0**
Case size 1206, 500 VDC
470. pF
680. pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
B37872K3471K0**
B37872K3681K0**
B37872K3102K0**
B37872K3152K0**
B37872K3222K0**
B37872K3332K0**
B37872K3472K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
3) Blister tape, 180-mm reel, ordering code ** ^ 62
4) Blister tape, 330-mm reel, ordering code ** ^ 72
Please read Cautions and warnings and
Important notes at the end of this document.
14
12/05
Multilayer ceramic capacitors
X7R
X7R; 1210
Ordering codes and packing for X7R, 50, 100, 200 and 500 VDC, nickel-barrier terminations
Chip thickness
Ordering code 2)
CR1)
mm
Blister tape,
∅ 180-mm reel
** ^ 62
pcs./reel
Blister tape,
∅ 330-mm reel
** ^ 72
pcs./reel
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
3000
3000
16000
16000
16000
16000
12000
12000
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
4000
4000
4000
4000
4000
4000
4000
3000
16000
16000
16000
16000
16000
16000
16000
12000
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
1.6 ± 0.1
4000
4000
4000
4000
4000
3000
3000
2000
16000
16000
16000
16000
16000
12000
12000
8000
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
0.8 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
1.6 ± 0.1
4000
4000
4000
4000
3000
3000
2000
16000
16000
16000
16000
12000
12000
8000
Case size 1210, 50 VDC
10.
22.
47.
100.
220.
470.
nF
nF
nF
nF
nF
nF
B37950K5103K0**
B37950K5223K0**
B37950K5473K0**
B37950K5104K0**
B37950K5224K0**
B37950K5474K0**
Case size 1210, 100 VDC
10,
15.
22.
33.
47.
68.
100.
150.
nF
nF
nF
nF
nF
nF
nF
nF
B37950K1103K0**
B37950K1153K0**
B37950K1223K0**
B37950K1333K0**
B37950K1473K0**
B37950K1683K0**
B37950K1104K0**
B37950K1154K0**
Case size 1210, 200 VDC
3.9 nF
4.7 nF
6.8 nF
10. nF
15. nF
22. nF
33. nF
47. nF
B37950K2392K0**
B37950K2472K0**
B37950K2682K0**
B37950K2103K0**
B37950K2153K0**
B37950K2223K0**
B37950K2333K0**
B37950K2473K0**
Case size 1210, 500 VDC
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10. nF
B37950K3102K0**
B37950K3152K0**
B37950K3222K0**
B37950K3332K0**
B37950K3472K0**
B37950K3682K0**
B37950K3103K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
Please read Cautions and warnings and
Important notes at the end of this document.
15
12/05
Multilayer ceramic capacitors
X7R
X7R; 1812 and 2220
Ordering codes and packing for X7R, 50 VDC, silver-palladium terminations
Chip thickness
CR1)
Ordering code 2)
mm
Blister tape,
∅ 180-mm reel
** ^ 62
pcs./reel
Blister tape,
∅ 330-mm reel
** ^ 72
pcs./reel
1.2 ± 0.1
1.2 ± 0.1
1.2 ± 0.1
1500
1500
1500
5000
5000
5000
1.2 ± 0.1
1.2 ± 0.1
1500
1500
5000
5000
Case size 1812, 50 VDC
100. nF
220. nF
470. nF
B37953J5104K0**
B37953J5224K0**
B37953J5474K0**
Case size 2220, 50 VDC
470. nF
1.0 μF
B37956J5474K0**
B37956J5105K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 3.
Please read Cautions and warnings and
Important notes at the end of this document.
16
12/05
Multilayer ceramic capacitors
X7R
X7R
Typical characteristics
Capacitance change ΔC/C25 versus
temperature T
20
Capacitance change ΔC/C0 versus
superimposed DC voltage V
KKE0186-U
ΔC %
C 25
0
_ 10
_ 20
_ 30
_ 40
_ 50
_ 60
_ 70
_ 80
_ 60 _ 40 _ 20 0 20 40 60 80 100 ˚C 140
T
Impedance |Z| versus
frequency f
Dissipation factor tan δ versus
temperature T
10
_1
KKE0189-J
tan δ
10
_2
_
10 _3 _ _
60 40 20 0 20 40 60 80 100 ˚C 140
T
Please read Cautions and warnings and
Important notes at the end of this document.
17
12/05
Multilayer ceramic capacitors
X7R
X7R
Typical characteristics
Capacitance change ΔC/C1 versus
time t
Insulation resistance Rins versus
temperature T
KKE0190-M
10 8
MΩ
KKE0191-V
10
ΔC %
C1
0
R ins
10 6
_5
10 5
_ 10
10 4
_ 15
10 3
10 2
0
20
40
60
80
100
_ 20
10 0
˚C 140
T
10 1
10 2
h
t
10 3
Further information
Please see General Technical Information at www.epcos.com/ceramic_capacitors or the data book
“Multilayer Ceramic Capacitors” for further information on:
■
■
■
■
Soldering directions
Taping and packing
Surface mounting instructions
Effects of mechanical stress
Cautions and warnings
■ Derating: A “state of the art” application design is essential to achieve failures rates at ppb level.
■
■
■
■
■
Do not use designs based on 100% of specified rated values.
AC applications may damage MLSC on a much lower level than DC voltage due to power dissipation losses.
Mechanical stress - Please note EPCOS “General Technical Information”, “Surface mounting instructions” and information about the effect of mechanical stress.
ESD - EPCOS recommends the use of varistors.
Further processing - care must be taken using moulding processes.
Combined stresses - the total stress (e.g. DC voltage, AC ripple, pulses and temperature) has to
be taken into account to estimate reliability of MLSC.
Please read Cautions and warnings and
Important notes at the end of this document.
18
12/05
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap,
SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 19 of 19
Similar pages