ACE ACE50518BNB+ Low noise 150ma ldo regulator Datasheet

ACE505
Low noise 150mA LDO regulator
Description
ACE505 series is a group of positive voltage output, low power consumption, low dropout voltage
regulator.
ACE505 can provide output value in the range of 1.2V~5.0V every 0.1V step. It also can be customized
on command.
ACE505 includes high accuracy voltage reference, error amplifier, current limit circuit and output driver
module.
ACE505 has excellent load and line transient response and good temperature characteristics, which can
assure the stability of chip and power system. And it uses trimming technique to guarantee output voltage
accuracy within±2%.
Features
•
•
•
•
•
•
•
•
•
•
•
Low Power Consumption: 25uA(Typ.)
Low output noise (27uVRMS)
Standby Mode: 0.1uA
Low dropout Voltage: 0.2V@100mA (Typ.)
High Ripple Rejection: 65dB@1kHz (Typ.)
Low Temperature Coefficient: ±100ppm/°C
Excellent Line regulation: 0.05%/V
Build-in chip enable circuit
Output Voltage Range: 1.2V~5.0V (customized on command every 0.1V step)
Highly Accurate: ±2% (±1% customized)
Output Current Limit
Application
•
•
•
•
•
Power source for cellular phones and various kind of PCSs
Battery Powered equipment
Power Management of MP3, PDA, DSC, Mouse, PS2 Games
Reference Voltage Source
Regulation after Switching Power
Typical Performance Characteristic:
ACE505-1.8V Output
Output Current Iout(mA)
VER 1.5
1
ACE505
Low noise 150mA LDO regulator
Absolute Maximum Ratings
Parameter
Symbol
Max
Unit
Input Voltage
10
V
Output Current
Power Dissipation
SOT-23-5
SC-70-5
Operating Junction temperature
200
mA
mW
TJ
250
250
125
Storage temperature
TS
- 45 to 150
O
C
O
C
Packaging Type
SC-70-5 / SOT-23-5
5
1
4
2
3
SC-70-5
SOT-23-5(A)
SOT-23-5(B)
Description
Function
5
5
1
VOUT
Output pin
1
1
3
VDD
Input Pin
2
2
2
GND
Ground Pin
3
3
4
CE
Chip Enable Pin
4
4
5
NC
No Connection
Ordering information
ACE505 XX XX + H
Halogen - free
Pb - free
HN: SC-70-5
BNA: SOT-23-5(A)
BNB: SOT-23-5(B)
Output Voltage:1.2V/1.5V…..5.0V
VER 1.5
2
ACE505
Low noise 150mA LDO regulator
Block Diagram
Recommended Work Conditions
Item
Min Max Unit
Input Voltage Range
8
V
85
℃
Ambient Temperature
-40
Electrical Characteristics
(Test Conditions: Cin=1uF, Cout=2.2uF,TA=25℃, unless otherwise specified.)
ACE505, for arbitrary output voltage
Symbol
Parameter
Vin
Input Voltage
Vout
Iout (Max.)
Dropout
Voltage
△Vout /
△Vin∙Vout
Output
Voltage
Vout>1.5V
Vout<=1.5V
Maximun Output
Current
Input-Output Voltage
Differentia
Line Regulation
△Vout
Load Regulation
Iss
Supply Current
Supply Current
(Srandby)
Output Voltage
Istandby
△Vout/
Conditions
Vin=Set Vout+1V
1mA≤Iout≤30mA
Vin-Vout=1V
Min
Typ
1.8
Vout
x0.98
Vout-0.03
Max
8
Vout
X1.02
Vout+0.03
Unit
s
V
V
150
mA
Refer to the Electrical Characteristics by Output Voltage
Iout=40mA
1.6V≤Vin≤8V
Vin=Set Vout+1V
1mA≤Iout≤80mA
Vin=Set Vout+1V
Vin=Set Vout+1V
Vce=Gnd
Iout=30mA
0.05
0.2
%/V
12
40
mV
25
50
uA
0.1
1.0
uA
±100
ppm
VER 1.5
3
ACE505
Low noise 150mA LDO regulator
△T∙Vout
Temperature
Coefficiency
PSRR
Ripple Rejection
Ilim
Short Current Limit
Vceh
CE Pull down
Resistance
CE Input Voltage “H”
Vcel
CE Input Voltage “L”
en
Output Noise
Rpd
/°C
F=1kHz,
Ripple=0.5Vp-p
Vin=Set Vout+1V
Vout=0V
2.0
65
dB
20
mA
10.0
MΩ
1.5
Vin
V
0
0.25
V
BW=10Hz~100kHz
5.0
uVr
ms
27
Electrical Characteristics by Output Voltage
Output Voltage
Vout (V)
Vout =1.5V
Vout = 1.6V
Vout = 1.7V
1.8 ≤ Vout ≤ 2.0
2.1 ≤ Vout ≤ 2.7
2.8 ≤ Vout ≤ 4.0
Dropout Voltage, VDIF (V)
Condition
Typ.
0.38
0.36
0.34
Iout = 120mA
0.32
0.28
0.22
Max.
0.70
0.65
0.60
0.55
0.50
0.35
Typical Application Circuit
CE
ACE505
In
VDD
VOUT
Out
+
Cap
GND
+
Cap
Application hints:
Note: Input capacitor (Cin=1uF) and Output capacitor (Cout=1uF/2.2uF) are recommended in all
application circuit.
VER 1.5
4
ACE505
Low noise 150mA LDO regulator
Typical Performance Characteristics
1.Output Voltage vs. Output Current
(with output short protection)
ACE505-1.8V
Output Current Iout (mA)
3.Droput Voltage vs. Output Current
Output Current Iout (mA)
2.Output Voltage vs. Input Voltage
ACE505-1.8V
Input Voltage Vin(V)
4.Supply Current vs. Input Voltage
Input Voltage Vin(V)
VER 1.5
5
ACE505
Low noise 150mA LDO regulator
5.Ripple rejection vs. Frequency
6.Line transient response
Frequency f(kHz)
7.Load transient response
VER 1.5
6
ACE505
Low noise 150mA LDO regulator
Packing Information
SC-70-5
VER 1.5
7
ACE505
Low noise 150mA LDO regulator
Packing Information
SOT-23-5
VER 1.5
8
ACE505
Low noise 150mA LDO regulator
Notes
ACE does not assume any responsibility for use as critical components in life support devices or systems
without the express written approval of the president and general counsel of ACE Electronics Co., LTD.
As sued herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and shoes failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
ACE Technology Co., LTD.
http://www.ace-ele.com/
VER 1.5
9
Similar pages