TI1 CDC2351MDBREP 1-line to 10-line clock driver with 3-state output Datasheet

SGLS248A − JUNE 2004 − REVISED AUGUST 2004
D Controlled Baseline
D
D
D
D
D
D
D
D
D
D Outputs Have Internal Series Damping
− One Assembly/Test Site, One Fabrication
Site
Extended Temperature Performance of
−55°C to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree†
Low Output Skew, Low Pulse Skew for
Clock-Distribution and Clock-Generation
Applications
Operates at 3.3-V VCC
LVTTL-Compatible Inputs and Outputs
Supports Mixed-Mode Signal Operation
(5-V Input and Output Voltages With
3.3-V VCC)
Distributes One Clock Input to 10 Outputs
D
D
D
Resistor to Reduce Transmission Line
Effects
Distributed VCC and Ground Pins Reduce
Switching Noise
State-of-the-Art EPIC-ΙΙB  BiCMOS Design
Significantly Reduces Power Dissipation
Shrink Small-Outline (DB) Package
DB PACKAGE
(TOP VIEW)
GND
Y10
VCC
Y9
OE
A
P0
P1
Y8
VCC
Y7
GND
† Component qualification in accordance with JEDEC and industry
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9
16
10
15
11
14
12
13
GND
Y1
VCC
Y2
GND
Y3
Y4
GND
Y5
VCC
Y6
GND
description
The CDC2351 is a high-performance clock-driver circuit that distributes one input (A) to 10 outputs (Y) with
minimum skew for clock distribution. The output-enable (OE) input disables the outputs to a high-impedance
state. Each output has an internal series damping resistor to improve signal integrity at the load. The CDC2351
operates at nominal 3.3-V VCC.
The propagation delays are adjusted at the factory using the P0 and P1 pins. The factory adjustments ensure
that the part-to-part skew is minimized and is kept within a specified window. Pins P0 and P1 are not intended
for customer use and should be connected to GND.
The CDC2351M is characterized for operation over the full military temperature range of −55°C to 125°C.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
−55°C to 125°C
SSOP − DB
Tape and Reel
CDC2351MDBREP
CK2351MEP
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design
guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙΒ is a trademark of Texas Instruments.
Copyright  2004, Texas Instruments Incorporated
! "#$ ! %#&'" ($)
(#"! " !%$""! %$ *$ $! $+! !#$!
!(( ,-) (#" %"$!!. ($! $"$!!'- "'#($
$!. '' %$$!)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SGLS248A − JUNE 2004 − REVISED AUGUST 2004
FUNCTION TABLE
INPUTS
A
OE
OUTPUTS
In
L
H
Z
H
H
Z
L
L
L
H
L
H
logic diagram (positive logic)
OE
5
23
21
19
18
Y1
Y2
Y3
Y4
6
A
16
7 8
P0 P1
14
11
9
4
2
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
Y5
Y6
Y7
Y8
Y9
Y10
SGLS248A − JUNE 2004 − REVISED AUGUST 2004
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4.6 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Voltage range applied to any output in the high state or power-off state,
VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 3.6 V
Current into any output in the low state, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 mA
Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −18 mA
Output clamp current, IOK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA
Maximum power dissipation at TA = 55°C (in still air) (see Note 2): DB package . . . . . . . . . . . . . . . . . . 0.65 W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.
For more information, see the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology
Data Book, literature number SCBD002.
recommended operating conditions (see Note 3)
MIN
MAX
3.6
VCC
VIH
Supply voltage
3
High-level input voltage
2
VIL
VI
Low-level input voltage
IOH
IOL
High-level output current
fclock
TA
Input clock frequency
0
Low-level output current
Operating free-air temperature
CDC2351M
−55
V
V
0.8
Input voltage
UNIT
V
5.5
V
−12
mA
12
mA
100
MHz
125
°C
NOTE 3: Unused pins (input or I/O) must be held high or low.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VIK
VOH
VCC = 3 V,
VCC = 3 V,
II = −18 mA
IOH = − 12 mA
VOL
II
IO‡
VCC = 3 V,
VCC = 3.6 V,
IOL = 12 mA
VI = VCC or GND
VCC = 3.6 V,
VCC = 3.6 V,
VO = 2.5 V
VCC = 3 V or 0
IOZ
MIN
TYP
Ci
VCC = 3.6 V,
VI = VCC or GND,
IO = 0,
VI = VCC or GND
VCC = 3.3 V,
V
V
−7
0.8
V
±1
µA
−70
mA
± 10
µA
0.3
Outputs low
15
Outputs disabled
0.3
f = 10 MHz
Co
VO = VCC or GND, VCC = 3.3 V,
f = 10 MHz
‡ Not more than one output should be tested at a time and the duration of the test should not exceed one second.
POST OFFICE BOX 655303
UNIT
−1.2
2
Outputs high
ICC
MAX
• DALLAS, TEXAS 75265
mA
4
pF
6
pF
3
SGLS248A − JUNE 2004 − REVISED AUGUST 2004
switching characteristics, CL = 50 pF (see Figure 1 and Figure 2)
FROM
(INPUT)
TO
(OUTPUT)
tPLH
tPHL
A
Y
tPZH
tPZL
OE
Y
tPHZ
tPLZ
OE
Y
tsk(o)
A
tsk(p)
tsk(pr)
tr
tf
PARAMETER
VCC = 3.3 V,
TA = 25°C
VCC = 3 V to 3.6 V,
TA = −55°C to 125°C
MIN
UNIT
MIN
TYP
MAX
MAX
3.8
4.3
4.8
1.1
11
3.6
4.1
4.6
1
9.7
2.4
4.9
6
1
12
2.4
4.3
6
1
11.1
2.2
4.4
6.3
1
11.1
2.2
4.6
6.3
1
11.5
Y
0.3
0.5
2.5
ns
A
Y
0.2
0.8
3
ns
A
Y
A
Y
2.5
ns
A
Y
2.5
ns
1
ns
ns
ns
ns
switching characteristics temperature and VCC coefficients over recommended operating free-air
temperature and VCC range (see Note 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
MIN
MAX
UNIT
ps/10°C
∝tPLH(T)
∝tPHL(T)
Average temperature coefficient of low-to-high propagation delay
A
Y
Average temperature coefficient of high-to-low propagation delay
A
Y
85†
50†
∝tPLH(VCC)
Average VCC coefficient of low-to-high propagation delay
A
Y
−145‡
ps/
100 mV
∝tPHL(VCC)
Average VCC coefficient of high-to-low propagation delay
A
Y
−100‡
ps/
100 mV
† ∝tPLH(T) and ∝tPHL(T) are virtually independent of VCC.
‡ ∝tPLH(VCC) and ∝tPHL(VCC) are virtually independent of temperature.
NOTE 4: This data was extracted from characterization material and has not been tested at the factory.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
ps/10°C
SGLS248A − JUNE 2004 − REVISED AUGUST 2004
PARAMETER MEASUREMENT INFORMATION
6V
S1
500 Ω
From Output
Under Test
TEST
tPLH /tPHL
tPLZ /tPZL
tPHZ /tPZH
Open
GND
CL = 50 pF
(see Note A)
S1
Open
6V
GND
500 Ω
tw
LOAD CIRCUIT
3V
Input
3V
Timing Input
1.5 V
1.5 V
0V
1.5 V
0V
tsu
VOLTAGE WAVEFORMS
th
3V
Data Input
1.5 V
1.5 V
0V
VOLTAGE WAVEFORMS
1.5 V
tPLH
tPHL
2V
0.8 V
tr
1.5 V
0V
tPLZ
1.5 V
0V
Output
1.5 V
tPZL
3V
Input
3V
Output
Control
(low-level
enabling)
1.5 V
VOH
2V
0.8 V
VOL
tf
3V
Output
Waveform 1
S1 at 6 V
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
1.5 V
tPZH
VOLTAGE WAVEFORMS
VOL + 0.3 V
VOL
tPHZ
VOH
1.5 V
VOH − 0.3 V
≈0V
VOLTAGE WAVEFORMS
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
D. The outputs are measured one at a time with one transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SGLS248A − JUNE 2004 − REVISED AUGUST 2004
PARAMETER MEASUREMENT INFORMATION
A
Y1
tPHL1
tPLH1
tPHL2
tPLH2
tPHL3
tPLH3
tPHL4
tPLH4
tPHL5
tPLH5
tPHL6
tPLH6
tPHL7
tPLH7
tPHL8
tPLH8
tPHL9
tPLH9
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
Y10
tPHL10
tPLH10
NOTES: A. Output skew, tsk(o), is calculated as the greater of:
− The difference between the fastest and slowest of tPLHn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
− The difference between the fastest and slowest of tPHLn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
B. Pulse skew, tsk(p), is calculated as the greater of | tPLHn − tPHLn | (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10).
C. Process skew, tsk(pr), is calculated as the greater of:
− The difference between the fastest and slowest of tPLHn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) across multiple devices under identical
operating conditions.
− The difference between the fastest and slowest of tPHLn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) across multiple devices under identical
operating conditions.
Figure 2. Waveforms for Calculation of tsk(o), tsk(p), tsk(pr)
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
22-Sep-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
CDC2351MDBREP
ACTIVE
SSOP
DB
24
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
CDC2351MDBREPG4
ACTIVE
SSOP
DB
24
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
V62/04757-01XE
ACTIVE
SSOP
DB
24
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF CDC2351-EP :
• Catalog: CDC2351
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
CDC2351MDBREP
Package Package Pins
Type Drawing
SSOP
DB
24
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
2000
330.0
16.4
Pack Materials-Page 1
8.2
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
8.8
2.5
12.0
16.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CDC2351MDBREP
SSOP
DB
24
2000
367.0
367.0
38.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
Similar pages