Fairchild FOD8143S 4-pin high operating temperature phototransistor optocoupler Datasheet

FOD814 Series, FOD817 Series
4-Pin High Operating Temperature
Phototransistor Optocouplers
Features
Description
■ AC input response (FOD814 only)
The FOD814 consists of two gallium arsenide infrared
emitting diodes, connected in inverse parallel, driving a
silicon phototransistor output in a 4-pin dual in-line
package. The FOD817 Series consists of a gallium
arsenide infrared emitting diode driving a silicon
phototransistor in a 4-pin dual in-line package.
■ Applicable to Pb-free IR reflow soldering
■ Compact 4-pin package
■ Current transfer ratio in selected groups:
FOD814: 20–300%
FOD814A: 50–150%
FOD817: 50–600%
FOD817A: 80–160%
FOD817B: 130–260%
FOD817C: 200–400%
FOD817D: 300–600%
■ C-UL, UL and VDE approved
■ High input-output isolation voltage of 5000Vrms
■ Minimum BVCEO of 70V guaranteed
■ Higher operating temperatures (versus H11AXXX
counterparts)
Applications
FOD814 Series
■ AC line monitor
■ Unknown polarity DC sensor
■ Telephone line interface
FOD817 Series
■ Power supply regulators
■ Digital logic inputs
■ Microprocessor inputs
Functional Block Diagram
ANODE, CATHODE 1
4 COLLECTOR
CATHODE, ANODE 2
3 EMITTER
FOD814
ANODE 1
4 COLLECTOR
CATHODE 2
3 EMITTER
4
FOD817
1
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
December 2011
Value
Symbol
Parameter
FOD814
Units
FOD817
TOTAL DEVICE
TSTG
Storage Temperature
TOPR
Operating Temperature
TSOL
Lead Solder Temperature
-55 to +150
-55 to +105
°C
-55 to +110
°C
260 for 10 sec
°C
125 Max.
°C
TJ
Junction Temperature
θJC
Junction-to-Case Thermal Resistance
210
°C/W
Total Power Dissipation
200
mW
PTOT
EMITTER
IF
Continuous Forward Current
VR
Reverse Voltage
±50
50
mA
PD
Power Dissipation
Derate above 100°C
70
1.7
VCEO
Collector-Emitter Voltage
70
V
VECO
Emitter-Collector Voltage
6
V
IC
Continuous Collector Current
50
mA
PC
Collector Power Dissipation
Derate above 90°C
150
2.9
mW
mW/°C
6
mW
mW/°C
DETECTOR
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
2
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Absolute Maximum Ratings (TA = 25°C Unless otherwise specified.)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Individual Component Characteristics
Symbol
Parameter
Device
Test Conditions
Min.
Typ.*
Max.
Unit
V
EMITTER
VF
Forward Voltage
IR
Reverse Leakage Current
Ct
Terminal Capacitance
FOD814
IF = ±20mA
1.2
1.4
FOD817
IF = 20mA
1.2
1.4
FOD817
VR = 4.0V
10
µA
pF
FOD814
V = 0, f = 1kHz
50
250
FOD817
V = 0, f = 1kHz
30
250
Collector Dark Current
FOD814
VCE = 20V, IF = 0
FOD817
VCE = 20V, IF = 0
Collector-Emitter Breakdown
Voltage
FOD814
IC = 0.1mA, IF = 0
70
FOD817
IC = 0.1mA, IF = 0
70
Emitter-Collector Breakdown
Voltage
FOD814
IE = 10µA, IF = 0
6
FOD817
IE = 10µA, IF = 0
6
DETECTOR
ICEO
BVCEO
BVECO
100
nA
100
V
V
DC Transfer Characteristics
Symbol
CTR
DC
Characteristic
Current Transfer
Ratio
Device
Test Conditions
Min.
FOD814
5V(1)
Max.
Unit
20
300
%
50
150
50
600
FOD817A
80
160
FOD817B
130
260
FOD817C
200
400
FOD817D
300
600
IF = ±1mA, VCE =
FOD814A
FOD817
VCE (sat) Collector-Emitter
Saturation Voltage
IF = 5mA, VCE = 5V(1)
Typ.*
FOD814
IF = ±20mA, IC = 1mA
0.1
0.2
FOD817
IF = 20mA, IC = 1mA
0.1
0.2
V
AC Transfer Characteristics
Symbol AC Characteristic
Device
Test Conditions
fC
Cut-Off Frequency
FOD814
VCE = 5V, IC = 2mA, RL = 100Ω,
-3dB
tr
Response Time (Rise)
FOD814,
FOD817
VCE = 2 V, IC = 2mA, RL = 100Ω(2)
tf
Response Time (Fall)
FOD814,
FOD817
Min.
15
Typ.* Max. Unit
80
kHz
4
18
µs
3
18
µs
*Typical values at TA = 25°C
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
3
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Electrical Characteristics (TA = 25°C Unless otherwise specified.)
Isolation Characteristics
Symbol
Characteristic
Device
Test Conditions
VISO
Input-Output Isolation
Voltage(3)
FOD814, f = 60Hz, t = 1 min,
FOD817 II-O ≤ 2µA
RISO
Isolation Resistance
FOD814, VI-O = 500VDC
FOD817
CISO
Isolation Capacitance
FOD814, VI-O = 0, f = 1 MHz
FOD817
Min.
Typ.*
Max.
5000
5x1010
Units
Vac(rms)
1x1011
0.6
Ω
1.0
pf
*Typical values at TA = 25°C
Notes:
1. Current Transfer Ratio (CTR) = IC/IF x 100%.
2. For test circuit setup and waveforms, refer to page 7.
3. For this test, Pins 1 and 2 are common, and Pins 3 and 4 are common.
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
4
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Electrical Characteristics (TA = 25°C Unless otherwise specified.) (Continued)
COLLECTOR POWER DISSIPATION PC (mW)
200
150
100
50
0
-55 -40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE TA (°C)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) (V)
6
Fig. 3 Collector-Emitter Saturation Voltage
vs. Forward Current
Ic = 0.5mA
1mA
3mA
5mA
5
4
2
1
0
2.5
5.0
7.5 10.0 12.5
FORWARD CURRENT IF (mA)
CURRENT TRANSFER RATIO CTR ( %)
FORWARD CURRENT IF (mA)
75oC
o
50 C
25oC
0oC
o
-30 C
o
-55 C
1.5
0
20
40
60
80 100 120
o
TA = 105 C
75oC
o
50 C
10
25oC
0oC
o
-30 C
1
o
-55 C
140
1.0
1.5
2.0
120
VCE = 5V
Ta= 25°C
100
FOD817
80
60
40
FOD814
20
0
0. 1 0.2
2.0
FORWARD VOLTAGE VF (V)
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
0
-55 -40 -20
Fig. 6 Current Transfer Ratio
vs. Forward Current
TA = 110 C
1.0
50
FORWARD VOLTAGE VF (V)
o
0.1
0.5
100
0.1
0.5
15.0
Fig. 5 Forward Current vs. Forward Voltage
(FOD817)
100
1
150
Ta = 25°C
3
10
200
Fig. 4 Forward Current vs. Forward Voltage
(FOD814)
100
7mA
0
Fig. 2 Collector Power Dissipation
vs. Ambient Temperature (FOD817)
AMBIENT TEMPERATURE TA (°C)
FORWARD CURRENT IF (mA)
COLLECTOR POWER DISSIPATION PC (mW)
Fig. 1 Collector Power Dissipation
vs. Ambient Temperature (FOD814)
0.5 1 2
5 10 20 50 100
FORWARD CURRENT IF (mA)
www.fairchildsemi.com
5
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Typical Electrical/Optical Characteristics (TA = 25°C Unless otherwise specified.)
Fig. 8 Collector Current vs.
Collector-Emitter Voltage (FOD817)
Fig. 7 Collector Current
vs. Collector-Emitter Voltage (FOD814)
30
50
I F = 30mA
40
20 m A
30
Pc (M AX.)
10mA
20
I IF = 30mA
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
Ta= 25°C
5mA
10
Pc(MAX.)
20
15
10mA
10
5m A
5
1m A
0
0
0
0
10 20 30 40 50 60 70 80 90 100
COLLECTOR-EMITTER VOLTAGE VCE (V)
Fig. 9 Relative Current Transfer Ratio
vs. Ambient Temperature
Fig. 10 Collector-Emitter Saturation Voltage
vs. Ambient Temperature
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) (V)
FOD814
IF = 1 mA
VCE = 5V
140
120
100
80
FOD817
IF = 5mA
VCE = 5V
60
40
20
0
-60 -40 -20
0
0.12
I = 20mA
F
0.10
0.08
0.06
0.04
0.02
Fig. 11 LED Power Dissipation
vs. Ambient Temperature (FOD814)
Fig. 12 LED Power Dissipation
vs. Ambient Temperature (FOD817)
LED POWER DISSIPATION PLED (mW)
100
80
60
40
20
0
-55 -40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE TA (°C)
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
IC = 1mA
0.00
-60 -40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE TA (°C)
20 40 60 80 100 120
AMBIENT TEMPERATURE TA (°C)
LED POWER DISSIPATION PLED (mW)
10 20 30 40 50 60 70 80 90
COLLECTOR-EMITTER VOLTAGE VCE (V)
160
RELATIVE CURRENT TRANSFER
RATIO (%)
Ta = 25°C
20mA
25
100
80
60
40
20
0
-55 -40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE TA (°C)
www.fairchildsemi.com
6
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Typical Electrical/Optical Characteristics (Continued) (TA = 25°C Unless otherwise specified.)
Fig. 13 Response Time
vs. Load Resistance
RESPONSE TIME (µs)
50
20
VCE = 2V
Ic= 2mA
Ta = 25°C
Fig. 14 Frequency Response
tr
VOLTAGE GAIN AV (dB)
100
tf
10
5
td
2
ts
1
0.5
VCE = 2V
Ic = 2mA
Ta = 25°C
0
RL=10k
1k
100
-10
0.2
-20
0.2
0.1
COLLECTOR DARK CURRENT ICEO (nA)
0.1 0.2 0.5 1
2
5
LOAD RESISTANCE RL (kΩ)
10
0.5 15 2
10
100
FREQUENCY f (kHz)
1000
Fig. 15 Collector Dark Current
vs. Ambient Temperature
10000
VCE = 20V
1000
100
10
1
0.1
0.01
-60 -40 -20
0
20 40 60 80 100 120
AMBIENT TEMPERATURE TA (°C)
Test Circuit for Frequency Response
Test Circuit for Response Time
Vcc
Input
RD
Input
Vcc
Output
RL Output
RD
10%
RL
Output
90%
td
ts
tr
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
tf
www.fairchildsemi.com
7
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Typical Electrical/Optical Characteristics (Continued) (TA = 25°C Unless otherwise specified.)
Through Hole
Surface Mount
0.276 (7.00)
0.236 (6.00)
0.200 (5.10)
0.161 (4.10)
0.312 (7.92)
0.288 (7.32)
0.157 (4.00)
0.118 (3.00)
0.130 (3.30)
0.091 (2.30)
0.200 (5.10)
0.161 (4.10)
SEATING PLANE
SEATING PLANE
0.312 (7.92)
0.288 (7.32)
0.157 (4.00)
0.118 (3.00)
0.051 (1.30)
0.043 (1.10)
0.020 (0.51)
TYP
0.276 (7.00)
0.236 (6.00)
0.010 (0.26)
0.049 (1.25)
0.030 (0.76)
0.024 (0.60)
0.004 (0.10)
0.412 (10.46)
0.388 (9.86)
0.010 (0.26)
0.150 (3.80)
0.110 (2.80)
0.110 (2.79)
0.090 (2.29)
0.393 (9.98)
0.300 (7.62)
Lead Coplanarity 0.004 (0.10) MAX
0.024 (0.60)
0.016 (0.40)
0.110 (2.79)
0.090 (2.29)
Surface Mount (Footprint Dimensions)
0.4" Lead Spacing
1.5
SEATING PLANE
1.3
0.200 (5.10)
0.161 (4.10)
0.312 (7.92)
0.288 (7.32)
0.157 (4.00)
0.118 (3.00)
0.276 (7.00)
0.236 (6.00)
9
0.291 (7.40)
0.252 (6.40)
0.130 (3.30)
0.091 (2.30)
0.110 (2.80)
0.011 (1.80)
0.150 (3.80)
0.110 (2.80)
0.024 (0.60)
0.016 (0.40)
0.010 (0.26)
2.54
0.110 (2.79)
0.090 (2.29)
0.42 (10.66)
0.38 (9.66)
Note:
All dimensions are in inches (millimeters)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
8
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Package Dimensions
Option
Part Number Example
Description
S
FOD814S
Surface Mount Lead Bend
SD
FOD814SD
Surface Mount; Tape and reel
300
FOD814300
VDE Approved
300W
FOD814300W
VDE Approved, 0.4" Lead Spacing
3S
FOD8143S
VDE Approved, Surface Mount
3SD
FOD8143SD
VDE Approved, Surface Mount, Tape & Reel
Marking Information
4
5
V X ZZ Y
3
814
6
2
1
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
Y = Manufactured in Thailand
YA = Manufactured in China
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
9
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Ordering Information
P2
Ø1.55±0.05
P0
1.75±0.1
F
W
B0
A0
P1
0.3±0.05
K0
Note:
All dimensions are in millimeters.
Symbol
Description
Dimensions in mm (inches)
W
Tape wide
16 ± 0.3 (.63)
P0
Pitch of sprocket holes
F
P2
Distance of compartment
7.5 ± 0.1 (.295)
2 ± 0.1 (.079)
P1
Distance of compartment to compartment
12 ± 0.1 (.472)
A0
Compartment
4 ± 0.1 (.15)
10.45 ± 0.1 (.411)
B0
5.30 ± 0.1 (.209)
K0
4.25 ± 0.1 (.167)
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
10
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Carrier Tape Specifications
Temperature (°C)
Tp
Tsmax
Ramp-down
Tsmin
25°C
Soldering zon
ts (Preheat)
Time (sec)
Profile Feature
Pb-Sn solder assembly
Lead Free assembly
Preheat condition
(Tsmin-Tsmax / ts)
100°C ~ 150°C
60 ~ 120 sec
150°C ~ 200°C
60 ~120 sec
Melt soldering zone
183°C
60 ~ 120 sec
217°C
30 ~ 90 sec
Peak temperature (Tp)
240 +0/-5°C
260 +0/-5°C
Ramp-down rate
6°C/sec max.
6°C/sec max.
Recommended Wave Soldering condition
Profile Feature
For all solder assembly
Peak temperature (Tp)
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
Max 260°C for 10 sec
www.fairchildsemi.com
11
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
Lead Free Recommended IR Reflow Condition
FOD814 Series, FOD817 Series — 4-Pin High Operating Temperature Phototransistor Optocouplers
©2006 Fairchild Semiconductor Corporation
FOD814 Series, FOD817 Series Rev. 1.1.5
www.fairchildsemi.com
12
Similar pages