Integral IN74HCT132AN Quad 2-input nand gate with schmitt-trigger input Datasheet

IN74HCT132A
QUAD 2-INPUT NAND GATE
WITH SCHMITT-TRIGGER INPUTS
High-Performance Silicon-Gate CMOS
The IN74HCT132A is identical in pinout to the LS/ALS132.
The IN74HCT132A may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA
ORDERING INFORMATION
IN74HCT132AN Plastic
IN74HCT132AD SOIC
TA = -55° to 125° C for all
packages
LOGIC DIAGRAM
PIN ASSIGNMENT
FUNCTION TABLE
Inputs
Output
A
B
Y
L
L
H
L
H
H
H
L
H
H
H
L
PIN 14 =VCC
PIN 7 = GND
1
IN74HCT132A
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC
DC Supply Voltage (Referenced to GND)
-0.5 to +7.0
V
VIN
DC Input Voltage (Referenced to GND)
-1.5 to VCC +1.5
V
VOUT
DC Output Voltage (Referenced to GND)
-0.5 to VCC +0.5
V
IIN
DC Input Current, per Pin
mA
±20
IOUT
DC Output Current, per Pin
mA
±25
ICC
DC Supply Current, VCC and GND Pins
mA
±50
PD
Power Dissipation in Still Air, Plastic DIP+
750
mW
SOIC Package+
500
Tstg
Storage Temperature
-65 to +150
°C
260
TL
Lead Temperature, 1 mm from Case for 10
°C
Seconds
(Plastic DIP or SOIC Package)
*
Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
DC Supply Voltage (Referenced to GND)
VIN, VOUT DC Input Voltage, Output Voltage (Referenced to
GND)
TA
Operating Temperature, All Package Types
t r, tf
Input Rise and Fall Time (Figure 1)
*
Min
4.5
0
Max
5.5
VCC
Unit
V
V
-55
-
+125
no
limit*
°C
ns
When VIN ≈ 0.5VCC, ICC> > quiescent current.
This device contains protection circuitry to guard against damage due to high static
voltages or electric fields. However, precautions must be taken to avoid applications of any voltage
higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and
VOUT should be constrained to the range GND≤(VIN or VOUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or
VCC). Unused outputs must be left open.
2
IN74HCT132A
DC ELECTRICAL CHARACTERISTICS(Voltages Referenced to GND)
Guaranteed Limit
VCC
Symbol
Parameter
Test Conditions
V
25 °C ≤85 ≤125
to
°C
°C
55°C
VT+max Maximum Positive- VOUT=0.1
V 4.5
1.9
1.9
1.9
Going
Input IOUT≤ 20 µA
5.5
2.1
2.1
2.1
Threshold Voltage
VT+min Minimum Positive- VOUT=0.1
V 4.5
1.2
1.2
1.2
Going
Input IOUT ≤ 20 µA
5.5
1.4
1.4
1.4
Threshold Voltage
VOUT=VCC-0.1
VT-max Maximum
V 4.5
1.2
1.2
1.2
Negative-Going
5.5
1.4
1.4
1.4
IOUT≤ 20 µA
Input
Threshold
Voltage
VT-min Minimum Negative- VOUT=VCC-0.1
V 4.5
0.5
0.5
0.5
Going
Input IOUT ≤ 20 µA
5.5
0.6
0.6
0.6
Threshold Voltage
1.4
1.4
1.4
VHmax Maximum
VOUT=0.1 V or VCC-0.1 4.5
5.5
1.5
1.5
1.5
Note
Hysteresis Voltage V
IOUT ≤ 20 µA
0.4
0.4
0.4
VHmin Minimum
VOUT=0.1 V or VCC-0.1 4.5
5.5
0.4
0.4
0.4
Note
Hysteresis Voltage V
IOUT ≤ 20 µA
4.4
4.4
4.4
VOH
Minimum
High- VIN≤VT-min or VT+max 4.5
5.5
5.4
5.4
5.4
Level
Output Iout ≤ 20 µA
Voltage
VIN≤VT-min or VT+max
3.7
3.98 3.8
IOUT
≤
4.0
mA 4.5
4
IOUT ≤ 5.2 mA
VOL
Maximum
Low- VIN
0.1
0.1
0.1
≥VT+max 4.5
Level
Output IOUT ≤ 20 µA
5.5
0.1
0.1
0.1
Voltage
VT+max
VIN≥
0.4
0.26 0.3
IOUT
≤
4.0
mA 4.5
3
IOUT ≤ 5.2 mA
IIN
Maximum
Input VIN=VCC or GND
5.5
±0.1 ±1. ±1.0
Leakage Current
0
VIN=VCC
ICC
Maximum
or
GND 5.5
1.0
10
40
Quiescent Supply IOUT=0µA
Current
(per Package)
VIN = 2.4 V, Any One
Additional
≥-55°C
25°C to
∆ICC
Quiescent Supply Input
125°C
VIN=VCC or GND, Other
Current
Inputs
5.5
2.9
2.4
IOUT=0µA
Note. VHmin>(VT+min)-(VT-max); VHmax=(VT+max)+(VT-min).
3
Uni
t
V
V
V
V
V
V
V
V
µA
µA
mA
IN74HCT132A
AC ELECTRICAL CHARACTERISTICS(VCC=5.0 V ± 10%, CL=50pF,Input tr=tf=6.0 ns)
Guaranteed Limit
Unit
Symbol
Parameter
25 °C ≤85°C ≤125
to
°C
-55°C
tPLH,
Maximum Propagation Delay, Input A or
25
31
38
ns
tPHL
B to Output Y (Figures 1 and 2)
15
19
22
ns
tTLH, tTHL Maximum Output Transition Time, Any
Output
(Figures 1 and 2)
CIN
Maximum Input Capacitance
10
10
10
pF
CPD
Power Dissipation Capacitance (Per
Gate)
Used to determine the no-load dynamic
power
consumption:
PD=CPDVCC2f+ICCVCC
4
Typical @25°C,VCC=5.0
V
27
pF
IN74HCT132A
5
IN74HCT132A
Figure 1. Switching Waveforms
Figure 2. Test Circuit
6
Similar pages