TOREX XC6216B20B201PL

XC6216/XE6216 Series
ETR0321_005
Voltage Regulators with Stand-by Function - Input Voltage: 28V
*XE6216 series are under development
■GENERAL DESCRIPTION
XC6216/XE6216 series are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage
reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver
transistor.
The output voltage is selectable in 100mV increments within the range of 2.0V to 12V using laser trimming technologies.
With external resistors, the output voltage range can be expanded from 2.0V to 23V. The series’ output stabilization
capacitor (CL) is also compatible with low ESR ceramic capacitors.
The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate
when the output current reaches current limit level or the junction temperature reaches temperature limit level.
The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power
consumption.
■APPLICATIONS
●Car audio, Car navigation systems
●Note book computers, PDAs
●Home appliances
●Audio visual equipment
(Cameras, VCRs, etc.)
●Cordless phones,
Wireless communication equipment
■ TYPICAL APPLICATION CIRCUIT
■FEATURES
: More than 150mA (200mA limit)
(VIN=VOUT(T)+3.0V)
Dropout Voltage
: 300mV@IOUT=20mA
: 2.0V~28.0V
Input Voltage Range
: 2.0V~12.0V (100mV increments)
Output Voltage
2.0V~23V with external resistors
Setting Range
High Accuracy
: Setting Voltage Accuracy±2%
(Setting Voltage Accuracy±1%
Possible)
Low Power Consumption : 5μA
Stand-by Current
: Less than 0.1μA
High Ripple Rejection
: 30dB@1kHz
Operating Temperature
: -40℃~+85℃
Low ESR Capacitor
: Ceramic Capacitor Compatible
Current Limit Circuit Built-In
Thermal Shutdown Circuit Built-In
Small Packages
: SOT-25, SOT-89, SOT-89-5,
USP-6C, SOT-223, TO-252
Max Output Current
■ TYPICAL PERFORMANCE
CHARACTERISTICS
●Output Voltage vs. Input Volatage
1/29
XC6216/XE6216 Series
■PIN CONFIGURATION
SOT-25
(TOP VIEW)
SOT-89
(TOP VIEW)
SOT-89-5
(TOP VIEW)
USP-6C
(BOTTOM VIEW)
* The dissipation pad for the USP-6C
package should be solder-plated in
recommended mount pattern and
metal masking so as to enhance
mounting strength and heat release.
If the pad needs to be connected to
other pins, it should be connected to
the VSS (No. 5) pin.
SOT-223
(TOP VIEW)
TO-252
(TOP VIEW)
■PIN ASSIGNMENT
●XC6216B/XE6216B Series
SOT-25
1
2
3
4
5
-
PIN NUMBER
SOT-89-5
5
2
4
3
1
-
USP-6C
6
5
4
3
1
2
PIN NAME
FUNCTIONS
VIN
VSS
NC
CE
VOUT
NC
Power Input
Ground
No connection
ON/OFF Control
Output
No connection
PIN NAME
FUNCTIONS
VIN
VSS
VOFB
CE
VOUT
NC
Power Input
Ground
Output Voltage Adjustment
ON/OFF Control
Output
No connection
PIN NAME
FUNCTIONS
VIN
VSS
VOUT
Power Input
Ground
Output
●XC6216C/XE6216C Series
SOT-25
1
2
3
4
5
-
PIN NUMBER
SOT-89-5
5
2
4
3
1
-
USP-6C
6
5
4
3
1
2
●XC6216D/XE6216D Series
SOT-89
3
2
1
2/29
PIN NUMBER
SOT-223
3
2
1
TO-252
1
2
3
XC6216/XE6216
Series
■ PRODUCT CLASSIFICATION
●Ordering Information
XC6216①②③④⑤⑥
DESIGNATOR
DESCRIPTION
①
Type and Options of
Regulators
SYMBOL
B
C
D
20 ~ 99
②③
Output Voltage
A, B, C
20
④
2
Output Voltage
Accuracy
⑤
Packages
⑥
Device Orientation
1
M
P
P
E
F
J
R
L
DESCRIPTION
: Fixed output voltage, High Active
: Output voltage externally set, High Active
: Fixed output voltage, No CE function
: For the voltage within 2.0V ~9.9V;
e.g. 2.5V ⇒ 25
5.0V ⇒ 50
: For the voltage above 10.0V;
e.g. 10.6V ⇒ A6
11.2V ⇒ B2
12.0V ⇒ C0
: For C type (output voltage externally set), VOFB=2.0V only
: Output voltage 100mV increments, within ±2% accuracy
e.g. 2.5V ⇒ ②=2, ③=5, ④=2
: Output voltage 100mV increments, within ±1% accuracy
e.g. 5.0V ⇒ ②=5, ③=0, ④=1
: SOT-25 ( for B and C types only)
: SOT-89 (for D type only)
: SOT-89-5 (for B and C types only)
: USP-6C (for B and C types only)
: SOT-223 (for D type only)
: TO-252 (for D type only)
: Embossed tape, standard feed
: Embossed tape, reverse feed
XE6216①②③④⑤⑥
DESIGNATOR
①
DESCRIPTION
Type and Options of
Regulators
SYMBOL
B
C
20 ~ 99
②③
Output Voltage
A, B, C
20
④
Output Voltage
Accuracy
⑤
Package
⑥
Device Orientation
2
1
M
P
P
E
R
L
DESCRIPTION
: Fixed output voltage, High Active
: Output voltage externally set, High Active
: For the voltage within 2.0V ~9.9V;
e.g. 2.5V ⇒ 25
5.0V ⇒ 50
: For the voltage above 10.0V;
e.g. 10.6V ⇒ A6
11.2V ⇒ B2
12.0V ⇒ C0
: For C type (output voltage externally set), VOFB=2.0V only
: Output voltage 100mV increments, Within ±2% accuracy
e.g. 2.5V ⇒ ②=2, ③=5, ④=2
: Output voltage 100mV increments, Within ±1% accuracy
e.g. 5.0V ⇒ ②=5, ③=0, ④=1
: SOT-25 ( for B and C types only)
: SOT-89 (for D type only)
: SOT-89-5 (for B and C types only)
: USP-6C (for B and C types only)
: Embossed tape, standard feed
: Embossed tape, reverse feed
*1: The XE products are under development.
3/29
XC6216/XE6216 Series
■ BLOCK DIAGRAMS
●XC6216B/XE6216B Series
(SOT-25, SOT-89-5, USP-6C)
●XC6216C/XE6216C Series
(SOT-25, SOT-89-5, USP-6C)
●XC6216D/XE6216D Series
(SOT-89, SOT-223, TO-252)
4/29
XC6216/XE6216
Series
■ABSOLUTE MAXIMUM RATINGS
●XC6216B Series
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
SOT-25
Power Dissipation
SOT-89-5
USP-6C
Operating Temperature Range
Storage Temperature Range
SYMBOL
VIN
IOUT
VOUT
VCE
Pd
Topr
Tstg
RATINGS
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
VSS-0.3~30
250
500
100
-40~+85
-55~+125
UNIT
V
mA
V
V
mW
(TJ=25℃)
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
●XC6216C Series
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
FB Voltage
SOT-25
Power Dissipation
SOT-89-5
USP-6C
Operating Temperature Range
Storage Temperature Range
SYMBOL
VIN
IOUT
VOUT
VCE
VOFB
Pd
Topr
Tstg
RATINGS
VSS-0.3~30
(*1)
300
VSS-0.3~VIN+0.3
VSS-0.3 ~ 30
VSS-0.3 ~ 30
250
500
100
-40~+85
-55~+125
UNIT
V
mA
V
V
V
mW
(TJ=25℃)
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
●XC6216D Series
PARAMETER
Input Voltage
Output Current
Output Voltage
SOT-89
Power Dissipation
SOT-223
TO-252
Operating Temperature Range
Storage Temperature Range
SYMBOL
VIN
IOUT
VOUT
Pd
Topr
Tstg
RATINGS
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
500
300
500
-40~+85
-55~+125
UNIT
V
mA
V
mW
(TJ=25℃)
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: Only SOT-89 package is available for the XE series.
5/29
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS
●XC6216B Series
Ta = 25℃
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT(E)
IOUT=20mA, VCE=VIN
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)≧3.0V)
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)<3.0V)
VIN=VOUT(T)+2.0V,
1mA≦IOUT≦50mA, VCE=VIN,
(2.0V≦VOUT(T)≦7.0V)
VIN=VOUT(T)+2.0V,
1mA≦IOUT≦50mA, VCE=VIN,
(7.1V≦VOUT(T)≦12.0V)
IOUT=20mA, VCE=VIN
IOUT=100mA,
VIN = VOUT(T)+3.0V, VCE=VIN
(VOUT(T)<3.0V)
IOUT=100mA, VCE=VIN
(VOUT(T)<3.0V)
VCE=VIN
VCE=VSS
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA, VCE=VIN
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA, VCE=VIN
Maximum Output Current
IOUTMAX
Load Regulation
△VOUT
Dropout Voltage 1
Vdif1
Dropout Voltage 2
Vdif2
Supply Current
Stand-by Current
ISS
Istby
△VOUT /
Line Regulation 1
△VIN・VOUT(T)
△VOUT /
Line Regulation 2
△VIN・VOUT(T)
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Topr・VOUT(T)
MIN.
TYP.
MAX.
E-0
UNIT
CIRCUIT
V
①
150
-
-
mA
①
100
-
-
mA
①
-
50
90
mV
①
-
110
140
mV
①
E-1
mV
①
E-2
mV
①
1
-
5
0.01
9
0.10
μA
μA
②
②
0.01
0.05
0.10
%/V
①
0.03
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
Ripple Rejection Rate
PSRR
Short Current
CE ”H” Level Voltage
CE ”L” Level Voltage
CE ”H” Level Current
CE ”L” Level Current
Ishort
VCEH
VCEL
ICEH
ICEL
IOUT=20mA, VCE=VIN
-40℃≦Topr≦85℃
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC
IOUT=20mA, f=1kHz, VCE=VIN
VIN=VOUT(T)+2.0V, VCE=VIN
VIN=28.0V
VIN=28.0V
VIN=VCE=28.0V
VIN=28.0V, VCE=VSS
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
-
25
-
℃
-
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Range
TTSD-TTSR
-
30
-
dB
③
1.1
0
-0.1
-0.1
30
-
28.0
0.35
0.1
0.1
mA
V
V
μA
μA
①
①
①
①
①
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
6/29
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XC6216C Series
Ta = 25℃
PARAMETER
SYMBOL
Output Voltage
VOUT(E)
Divided Resistor
RFB
Maximum Output Current
IOUTMAX
Load Regulation
△VOUT
Dropout Voltage1
Vdif1
Dropout Voltage2
Vdif2
Supply Current
Stand-by Current
ISS
Istby
Line Regulation1
△VOUT /
△VIN・VOUT(T)
Line Regulation2
△VOUT /
△VIN・VOUT(T)
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Topr・VOUT(T)
Ripple Rejection Rate
PSRR
Short Current
Ishort
CE ”H” Level Voltage
CE ”L” Level Voltage
CE ”H” Level Current
VCEH
VCEL
ICEH
CE ”L” Level Current
ICEL
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Range
CONDITIONS
IOUT=20mA, VCE=VIN,
VOFB=VOUT
VIN=VOUT=5.0V, VCE=VSS
VOFB=VOUT
VIN=5.0V, VCE=VIN ,
VOFB=VOUT
VIN=4.0V
1mA≦IOUT≦50mA,
VCE=VIN, VOFB=VOUT
IOUT=20mA, VCE=VIN,
VOFB=VOUT
IOUT=100mA, VIN=5.0V,
VCE=VIN, VOFB=VOUT
VCE=VIN, VOFB=VOUT
VCE=VSS, VOFB=VOUT
4.0V≦VIN≦28.0V,
IOUT=5mA, VCE=VIN,
VOFB=VOUT
4.0V≦VIN≦28.0V,
IOUT=13mA, VCE=VIN,
VOFB=VOUT
IOUT=20mA, VCE=VIN,
-40℃≦Topr≦85℃
VIN=4.0V+0.5Vp-pAC,
IOUT=20mA, f=1kHz, VCE=VIN
VOFB=VOUT
VIN=4.0V, VCE=VIN,
VOFB=VOUT
VIN=28.0V, VOFB=VOUT
VIN=28.0V, VOFB=VOUT
VIN=VCE=28.0V, VOFB=VOUT
VIN=28.0V, VCE=VSS
VOFB=VOUT
MIN.
TYP.
MAX.
UNIT
CIRCUIT
1.96
2.00
2.04
V
①
1.30
2.09
4.40
MΩ
④
100
-
-
mA
①
-
50
90
mV
①
-
450
600
mV
①
-
1900
2600-
mV
①
1
-
5
0.01
9
0.10
μA
μA
②
②
-
0.05
0.10
%/V
①
-
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
-
30
-
dB
③
-
30
-
mA
①
1.1
0
-0.1
-
28.0
0.5
0.1
V
V
μA
①
①
①
-0.1
-
0.1
μA
①
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
-
25
-
℃
-
TTSD-TTSR
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
7/29
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XC6216D Series
Ta = 25℃
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT(E)
IOUT=20mA
Maximum Output Current
IOUTMAX
Load Regulation
△VOUT
Dropout Voltage1
Vdif1
Dropout Voltage2
Vdif2
ISS
△VOUT /
Line Regulation1
△VIN・VOUT(T)
△VOUT /
Line Regulation2
△VIN・VOUT(T)
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Topr・VOUT(T)
MIN.
TYP.
MAX.
E-0
UNIT
CIRCUIT
V
①
VIN=VOUT(T)+3.0V,
(VOUT(T)≧3.0V)
150
-
-
mA
①
VIN=VOUT(T)+3.0V,
(VOUT(T)<3.0V)
100
-
-
mA
①
VIN=VOUT(T)+2.0V
1mA≦IOUT≦100mA
-
50
90
mV
①
E-1
mV
①
E-2
mV
①
IOUT=20mA
IOUT=100mA, VIN=VOUT(T)+3.0V
(VOUT(T)<3.0V)
IOUT=100mA,
(VOUT(T)≧3.0V)
Supply Current
1
5
9
μA
②
-
0.05
0.10
%/V
①
-
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
-
30
-
dB
③
-
30
-
mA
①
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA
Ripple Rejection Rate
PSRR
Short Current
Ishort
IOUT=20mA, VCE=VIN
-40℃≦Topr≦85℃
VIN=[VOUT(T)+2.0]V+0.5Vp-pAC
IOUT=20mA, f=1kHz
VIN=VOUT(T)+2.0V
TTSD
Junction Temperature
-
150
-
℃
-
TTSR
Junction Temperature
-
125
-
℃
-
-
25
-
℃
-
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Hysteresis Range
TTSD-TTSR
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
8/29
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart
PARAMETER
SETTING
VOLTAGE
VOUT(T)
(V)
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
E-0
OUTPUT VOLTAGE
(V)
2% ACCURACY
OUTPUT VOLTAGE
(V)
1% ACCURACY
VOUT
MIN.
1.960
2.058
2.156
2.254
2.352
2.450
2.548
2.646
2.744
2.842
2.940
3.038
3.136
3.234
3.332
3.430
3.528
3.626
3.724
3.822
3.920
4.018
4.116
4.214
4.312
4.410
4.508
4.606
4.704
4.802
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
VOUT
MAX.
2.040
2.142
2.244
2.346
2.448
2.550
2.652
2.754
2.856
2.958
3.060
3.162
3.264
3.366
3.468
3.570
3.672
3.774
3.876
3.978
4.080
4.182
4.284
4.386
4.488
4.590
4.692
4.794
4.896
4.998
MIN.
1.980
2.079
2.178
2.277
2.376
2.475
2.574
2.673
2.772
2.871
2.970
3.069
3.168
3.267
3.366
3.465
3.564
3.663
3.762
3.861
3.960
4.059
4.158
4.257
4.356
4.455
4.554
4.653
4.752
4.851
Vdif1
MAX.
2.020
2.121
2.222
2.323
2.424
2.525
2.626
2.727
2.828
2.929
3.030
3.131
3.232
3.333
3.434
3.535
3.636
3.737
3.838
3.939
4.040
4.141
4.242
4.343
4.444
4.545
4.646
4.747
4.848
4.949
TYP.
450
450
390
390
390
310
310
310
310
310
260
260
260
260
260
260
260
260
260
260
220
220
220
220
220
220
220
220
220
220
Vdif2
MAX.
600
600
520
520
520
450
450
450
450
450
360
360
360
360
360
360
360
360
360
360
320
320
320
320
320
320
320
320
320
320
TYP.
1900
1900
1700
1700
1700
1500
1500
1500
1500
1500
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
MAX.
2600
2600
2200
2200
2200
1900
1900
1900
1900
1900
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
9/29
XC6216/XE6216 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
PARAMETER
SETTING
VOLTAGE
VOUT(T)
(V)
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8.0
10/29
E-0
OUTPUT VOLTAGE
(V)
2% ACCURACY
OUTPUT VOLTAGE
(V)
1% ACCURACY
VOUT
MIN.
4.900
4.998
5.096
5.194
5.292
5.390
5.488
5.586
5.684
5.782
5.880
5.978
6.076
6.174
6.272
6.370
6.468
6.566
6.664
6.762
6.860
6.958
7.056
7.154
7.252
7.350
7.448
7.546
7.644
7.742
7.840
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
VOUT
MAX.
5.100
5.202
5.304
5.406
5.508
5.610
5.712
5.814
5.916
6.018
6.120
6.222
6.324
6.426
6.528
6.630
6.732
6.834
6.936
7.038
7.140
7.242
7.344
7.446
7.548
7.650
7.752
7.854
7.956
8.058
8.160
MIN.
4.950
5.049
5.148
5.247
5.346
5.445
5.544
5.643
5.742
5.841
5.940
6.039
6.138
6.237
6.336
6.435
6.534
6.633
6.732
6.831
6.930
7.029
7.128
7.227
7.326
7.425
7.524
7.623
7.722
7.821
7.920
Vdif1
MAX.
5.050
5.151
5.252
5.353
5.454
5.555
5.656
5.757
5.916
5.959
6.060
6.161
6.262
6.363
6.464
6.565
6.666
6.767
6.868
6.969
7.070
7.171
7.272
7.373
7.474
7.575
7.676
7.777
7.878
7.979
8.080
TYP.
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
Vdif2
MAX.
280
280
280
280
280
280
280
280
280
280
280
280
280
280
280
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
TYP.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
MAX.
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
XC6216/XE6216
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
PARAMETER
SETTING
VOLTAGE
VOUT(T)
(V)
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10.0
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11.0
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12.0
E-0
OUTPUT VOLTAGE
(V)
2% ACCURACY
OUTPUT VOLTAGE
(V)
1% ACCURACY
VOUT
MIN.
7.938
8.036
8.134
8.232
8.330
8.428
8.526
8.624
8.722
8.820
8.918
9.016
9.114
9.212
9.310
9.408
9.506
9.604
9.702
9.800
9.898
9.996
10.094
10.192
10.290
10.388
10.486
10.584
10.682
10.780
10.878
10.976
11.074
11.172
11.270
11.368
11.466
11.564
11.662
11.760
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
VOUT
MAX.
8.262
8.364
8.466
8.568
8.670
8.772
8.874
8.976
9.078
9.180
9.282
9.384
9.486
9.588
9.690
9.792
9.894
9.996
10.098
10.200
10.302
10.404
10.506
10.608
10.710
10.812
10.914
11.016
11.118
11.220
11.322
11.424
11.526
11.628
11.730
11.832
11.934
12.036
12.138
12.240
MIN.
8.019
8.118
8.217
8.316
8.415
8.514
8.613
8.712
8.811
8.910
9.009
9.108
9.207
9.306
9.405
9.504
9.603
9.702
9.801
9.900
9.999
10.098
10.197
10.296
10.395
10.494
10.593
10.692
10.791
10.890
10.989
11.088
11.187
11.286
11.385
11.484
11.583
11.682
11.781
11.880
Vdif1
MAX.
8.181
8.282
8.383
8.484
8.585
8.686
8.787
8.888
8.989
9.090
9.191
9.292
9.393
9.494
9.595
9.696
9.797
9.898
9.999
10.100
10.201
10.302
10.403
10.504
10.605
10.706
10.807
10.908
11.009
11.110
11.211
11.312
11.413
11.514
11.615
11.716
11.817
11.918
12.019
12.120
TYP.
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
Vdif2
MAX.
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
TYP.
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
650
MAX.
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
950
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
11/29
XC6216/XE6216 Series
■ OPERATIONAL EXPLANATION
<Output Voltage Control>
The voltage divided by resistors R11 & R12 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET, which is connected to the VOUT pin, is then driven by the subsequent output signal. The output
voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short
protect circuit operate in relation to the level of output current and heat dissipation. Further, the IC’s internal circuitry
can be shutdown via the CE pin’s signal.
<Short-Circuit Protection>
The XC6216/XE6216 series includes a current fold-back circuit as a short circuit protection. When the load current reaches
the current limit level, the current fold-back circuit operates and output voltage drops. The output voltage drops further and
output current decreases. When the output pin is shorted, a current of about 30mA flows.
<CE Pin>
The IC’s internal circuitry can be shutdown via the signal from the CE pin with the XC6216/XE6216 series. In shutdown
mode, output at the VOUT pin will be pulled down by R11 and R12 to the VSS level. Note that as the XC6216/XE6216 series
is ‘High Active/No pull down’, operations will become unstable with the CE pin open. We suggest that you use this IC with
either a VIN voltage or a VSS voltage input at the CE pin. If this IC is used with the correct specifications for the CE pin, the
operational logic is fixed and the IC will operate normally. However, supply current may increase as a result of through
current in the IC’s internal circuitry if a medium voltage is applied.
<Thermal Shutdown>
When the junction temperature of the built-in driver transistor reaches the temperature limit level (150℃ TYP.), the thermal
shutdown circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal
shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to the
level of the thermal shutdown release voltage.
<Minimum Operating Voltage>
For the stable operation of the IC, over 2.0V of input voltage is necessary. The output voltage may not be generated
normally if the input voltage is less than 2.0V.
12/29
XC6216/XE6216
Series
■ NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output
current. Please strengthen VIN and VSS wiring in particular.
3. Phase compensation inside the IC is performed in the XC6216/XE6216 series. Therefore, an abnormal oscillation does not
occur even if there is no output capacitor CL. An input capacitor CIN around 0.1uF~1.0uF between the VIN pin and the
VSS pin is required for input stability. Also, the output voltage fluctuation such as under shoot or over shoot, which occurs
because of the load change can be controlled by placing the output capacitor CL around 0.1uF~1.0uF between the VOUT
pin and VSS pin. The input capacitor (CIN) and the output capacitor (CL) should be placed to the IC as close as possible
with a shorter wiring.
4. Notes on Setting Output Voltage Externally (C type) Topr=25℃
The output voltage can be set externally by the following equation:
VOUT=2.0V x (Rxx + Ryy) / Ryy
………………………………………………………………………
Although the output voltage can be set freely by the above equation, resistance values can be calculated by the
following equations in case considering output voltage accuracy.
Ixx = IFB + Iyy
………………………………………………………………………
Iyy = 2.0V / Ryy
………………………………………………………………………
If the equation (3) is assigned to the equation (2), the equation becomes as below:
Ixx =IFB + 2.0V / Ryy
………………………………………………………………………
For this, the following equation can be used for setting output voltage externally:
VOUT=2.0V + Rxx・Ixx
………………………………………………………………………
And the equation (4) will be;
VOUT=2.0V + Rxx・(IFB + 2.0V / Ryy)
………………………………………………………………………
=2.0V x (1 + Rxx / Ryy) + Rxx・IFB ………………………………………………………………………
The second term of the equation (6), Rxx・IFB, is the cause of the output accuracy error.
The IFB can be calculated by the following equation:
IFB=2.0V / RFB
………………………………………………………………………
The cause of the output accuracy error, Rxx・IFB can be calculated by the equation below;
Rxx・IFB = Rxx・2.0V / Ryy
= 2.0V x Rxx・RFB
………………………………………………………………………
Accordingly, if Rxx is smaller than RFB, the output voltage error becomes minute.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
●Setting Resistance-Dependant of XC6216 Series’ Output Voltage
13/29
XC6216/XE6216 Series
■ TEST CIRCUITS
Circuit ①
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ②
●XC6216B/XE6216B Series
●XC6216C/XE6216C Series
●XC6216D/XE6216D Series
Circuit ③
●XC6216B/XE6216B Series
●XC6216D/XE6216D Series
Circuit ④
●XC6216C/XE6216C Series
14/29
●XC6216C/XE6216C Series
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6216B/C/D 202
VIN=VCE=5.0V, Ta=25℃, C IN=C L=1.0μF (ceramic)
2.0
1.5
1.0
Ta=-40℃
0.5
Ta=25℃
Ta=25℃, C IN=C L=1.0μF (ceramic)
2.5
Output Voltage: V OUT (V)
2.5
Output Voltage: V OUT (V)
XC6216B/C/D 202
2.0
1.5
1.0
VIN=3V
VIN=4V
0.5
VIN=5V
Ta=85℃
0.0
0.0
0
50
100
150
200
250
300
0
50
Output Current: IOUT (mA)
XC6216B/D 332
250
300
3.5
OutputVoltage:
Voltage:VOUT
V OUT (V)
(V)
Output
Output
Voltage
: VOUT
Output
Voltage:
V OUT(V)
(V)
200
Ta=25℃, C IN=C L=1.0μF (ceramic)
4.0
3.5
3.0
2.5
2.0
1.5
1.0
Ta=-40℃
Ta=25℃
0.5
0
50
100
150
200
3.0
2.5
2.0
1.5
VIN=4.3V
1.0
VIN=5.3V
0.5
Ta=85℃
0.0
VIN=6.3V
0.0
250
300
0
50
OutputCurrent
Current:: IOUT
IOUT (mA)
Output
XC6216B/D 502
300
4.0
3.0
2.0
Ta=-40℃
Ta=25℃
Ta=25℃, C IN=C L=1.0μF (ceramic)
6.0
Output
Voltage:
V OUT(V)
(V)
Output
Voltage
: VOUT
5.0
1.0
100
150
200
250
Output Current: IIOUT
OUT (mA)
(mA)
XC6216B/D 502
VIN=VCE=8.0V, Ta=25℃, C IN=C L=1.0μF (ceramic)
6.0
Output
OutputVoltage
Voltage:
: VOUT
V OUT (V)
150
XC6216B/D 332
VIN=VCE=6.3V, Ta=25℃, C IN=C L=1.0μF (ceramic)
4.0
100
Output Currrent: IOUT (mA)
5.0
4.0
3.0
2.0
VIN=6V
1.0
VIN=7V
Ta=85℃
VIN=8V
0.0
0.0
0
50
100
150
200
250
Output
(mA)
Output Current
Current:: IIOUT
OUT (mA)
300
0
50
100
150
200
250
OutputCurrent
Current:
IOUT (mA)
Output
: IOUT
300
15/29
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1) Output Voltage vs. Output Current (Continued)
XC6216B/D C02
XC6216B/D C02
VIN=VCE=15.0V, Ta=25℃, C IN=C L=1.0μF (ceramic)
14
12
12
Output
(V)
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
: VOUT
OutputVoltage
Voltage:
V OUT (V)
Ta=25℃, C IN=C L=1.0μF (ceramic)
14
10
8
6
4
Ta=-40℃
10
Ta=25℃
2
8
6
VIN=13V
4
VIN=14V
2
VIN=15V
Ta=85℃
0
0
0
50
100
150
200
250
OutputCurrent
Current:: IOUT
IOUT (mA)
Output
300
0
50
100
150
200
250
Current:: IOUT
Output Current
IOUT(mA)
(mA)
300
(2) Output Voltage vs. Input Voltage
XC6216B/C/D 202
XC6216B/C/D 202
Ta=25℃, C IN=C L=1.0μF (ceramic)
2.1
2.0
OutputVoltage
Voltage:
V OUT (V)
Output
: VOUT
2.0
Output
OutputVoltage
Voltage:
: VOUT
V OUT (V)
Ta=25℃, C IN=C L=1.0μF (ceramic)
2.1
1.9
1.8
1.7
IOUT=1mA
1.6
IOUT=10mA
1.9
1.8
1.7
IOUT=1mA
IOUT=10mA
1.6
IOUT=30mA
IOUT=30mA
1.5
1.5
1.5
2
2.5
3
Input
Input
Voltage:
(V)
ININ(V)
InputVoltage:
Voltage:VV
VIN
(V)
3.5
4
4
8
12
16
20
XC6216B/D 332
28
XC6216B/D 332
Ta=25℃, CIN=CL=1.0uF(ceramic)
Ta=25℃, CIN=CL=1.0uF(ceramic)
3.4
3.4
3.3
3.3
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
24
Input
IN (V)
InputVoltage:
Voltage V
: VIN
(V)
3.2
3.1
3
IOUT=1mA
2.9
3.2
3.1
3
IOUT=1mA
IOUT=10mA
2.9
IOUT=10mA
IOUT=30mA
IOUT=30mA
2.8
2.8
2.8
3.3
3.8
4.3
Input Voltage : VIN (V)
16/29
4.8
5.3
4
8
12
16
20
Input Voltage : VIN (V)
24
28
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6216B/D 502
XC6216B/D 502
Ta=25℃, C IN =C L=1.0μF (ceramic)
5.2
5.0
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
5.0
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
Ta=25℃, C IN =C L=1.0μF (ceramic)
5.2
4.8
4.6
4.4
IOUT=1mA
IOUT=10mA
4.2
4.8
4.6
4.4
IOUT=1mA
IOUT=10mA
4.2
IOUT=30mA
IOUT=30mA
4.0
4.0
4
4.5
5
5.5
6
6.5
8
12
InputVoltage
Voltage:
V IN(V)
(V)
Input
: VIN
16
XC6216B/D C02
OutputVoltage
Voltage:: V
OUT (V)
Output
VOUT
(V)
OutputVoltage
Voltage:
V OUT (V)
(V)
Output
: VOUT
28
Ta=25℃, C IN=C L=1.0μF (ceramic)
12.5
12.5
12.0
11.5
11.0
IOUT=1mA
IOUT=10mA
10.5
24
XC6216B/D C02
Ta=25℃, C IN=C L=1.0μF (ceramic)
13.0
20
InputVoltage
Voltage:: VIN
V IN (V)
(V)
Input
12.0
11.5
11.0
IOUT=1mA
IOUT=10mA
10.5
IOUT=30mA
IOUT=30mA
10.0
10.0
10
11
12
13
InputVoltage
Voltage:: VIN
V IN (V)
(V)
Input
14
14
16
18
20
22
24
26
28
InputVoltage:
Voltage V
: VIN
(V)
Input
IN (V)
(3) Dropout Voltage vs. Output Current
XC6216B/C/D 202
C IN=C L=1.0uF (ceramic)
Ta=-40℃
2.5
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
0.0
0
25
50
75
100
OutputCurrent
Current:: IOUT
IOUT (V)
Output
(mA)
125
150
C IN=C L=1.0uF (ceramic)
3.0
Dropout
Voltage :Voltage
V DIF (V)
Input/Output
Difference
: VDIF (V)
3.0
Input/Output
Dropout
Difference
VoltageVoltage
: V DIF (V)
: VDIF (V)
XC6216B/D 332
Ta=-40℃
2.5
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
0.0
0
25
50
75
100
125
Output
Current
: IOUT
Output
Current:
IOUT(mA)
(V)
150
17/29
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
XC6216B/D 502
CIN=CL=1.0uF(ceramic)
Ta=-40℃
2.5
C IN=C L=1.0uF (ceramic)
3.0
Input/Output
Dropout
Difference
VoltageVoltage
: V DIF (V)
: VDIF (V)
3.0
Dropout
Voltage:Voltage
V DIF (V)
Input/Output
Difference
: VDIF (V)
XC6216B/D C02
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
Ta=-40℃
2.5
Ta=25℃
Ta=85℃
2.0
1.5
1.0
0.5
0.0
0.0
0
25
50
75
100
125
Output
(mA)
OutputCurrent
Current:: IOUT
IOUT (V)
0
150
25
50
75
100
125
Output
(mA)
Output Current
Current:: IIOUT
OUT (V)
(4) Supply Current vs. Input Voltage
XC6216B/C/D 202
XC6216B/C/D 202
10
9
Supply
(μA)
SupplyCurrent:
CurrentIS:SISS
(uA)
8
Supply Current
Current:: ISISS
S (μA)
(uA)
VIN=4.0V
10
9
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
8
12
16
20
Input
VIN
InputVoltage
Voltage:: V
IN (V)
24
6
5
4
3
2
0
-40
0
4
7
1
Ta=85℃
0
8
28
-20
0
20
40
60
80
Ambient Temprature: Ta (℃)
XC6216B/D 332
10
10
9
9
8
8
Supply Current
Current:: ISISS
(uA)
A)
S (μ
Supply
SupplyCurrent
Current:
: ISS
ISS (uA)
(μA)
XC6216B/D 332
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
Ta=85℃
4
8
12
16
20
InputVoltage
Voltage:
V IN(V)
(V)
Input
: VIN
18/29
24
VIN=5.3V
7
6
5
4
3
2
1
0
0
100
28
0
-40
-20
0
20
40
60
Ambient Temprature: Ta (℃)
80
100
150
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) Supply Current vs. Input Voltage (Continued)
XC6216B/D 502
10
10
9
9
8
8
Supply
S (μA)
Supply Current:
Current :ISISS
(uA)
Supply
: ISS
SupplyCurrent
Current:
ISS (uA)
(μA)
XC6216B/D 502
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
0
4
8
12
16
20
7
6
5
4
3
2
1
Ta=85℃
0
VIN=7.0V
0
24
-40
28
-20
0
XC6216B/D C02
40
60
80
100
XC6216B/D C02
10
VIN=14.0V
10
9
9
Supply Current:
S (μA)
Current :ISISS
(uA)
8
Supply Current
Current::ISISS
(uA)
S (μA)
20
Ambient Temperature: Ta ( ℃)
Input
: VIN
InputVoltage
Voltage:
V IN(V)
(V)
7
6
5
4
3
Ta=-40℃
2
Ta=25℃
1
0
4
8
12
16
20
24
7
6
5
4
3
2
1
Ta=85℃
0
8
28
0
-40
-20
0
20
40
60
80
100
Ambient Temprature: Ta ( ℃)
Input
InputVoltage
Voltage:: VIN
V IN (V)
(V)
(5) Output Voltage vs. Ambient Temperature
XC621B/C/D 202
XC6216B/D 332
CIN=CL=1.0μF (ceramic)
2.20
3.45
Output
OutputVoltage:
VoltageV:OUT
VOUT
(V) (V)
2.15
Voltage:: VVOUT
OUT (V)
Output Voltage
(V)
C IN=C L=1.0μF (ceramic)
3.50
2.10
2.05
2.00
1.95
1.90
IOUT=1mA
1.85
IOUT=10mA
3.30
3.25
IOUT=1mA
3.20
IOUT=10mA
IOUT=20mA
3.10
1.80
-25
0
25
50
75
Ambient Temperature: Ta (℃)
3.35
3.15
IOUT=20mA
-50
3.40
100
-50
-25
0
25
50
75
Ambient Temperature: Ta ( ℃)
100
19/29
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
XC6216B/D 502
XC6216B/D C02
C IN=C L=1.0μF (ceramic)
5.20
5.15
12.15
Voltage :VVOUT
(V)
Output Voltage:
OUT (V)
Output Voltage:
Voltage :VVOUT
(V)
OUT (V)
C IN=C L=1.0μF (ceramic)
12.20
5.10
5.05
5.00
4.95
IOUT=1mA
4.90
IOUT=10mA
4.85
12.10
12.05
12.00
11.95
IOUT=1mA
11.90
IOUT=10mA
11.85
IOUT=20mA
IOUT=20mA
11.80
4.80
-50
-25
0
25
50
75
Ambient Temperature: Ta (℃)
-50
100
-25
0
25
50
75
Ambient Temperature: Ta ( ℃)
100
(6) Line Transient Response
XC6216B/C/D 202
I OUT=1mA, tr=tf =5μs
Input Voltage
2.3
5.0
2.2
2.1
3.0
Output Voltage
2.0
2.0
1.0
0.0
0.0
XC6216B/D 332
20/29
I OUT=30mA, tr=tf =5μs
7.0
3.6
6.0
3.4
Input
IN (V)
InputVoltage:
Voltage V: VIN
(V)
3.7
C L=1μF (ceramic), Ta=25℃
3.7
3.6
Input Voltage
5.0
4.0
3.5
Output Voltage
3.4
3.0
3.3
3.2
2.0
3.2
3.1
1.0
3.3
2.0
Time (1ms/div)
1.8
Time (1ms/div)
3.0
1.0
Output Voltage
1.8
3.5
Output Voltage
2.1
3.0
1.9
Output
OutputVoltage
Voltage:: VOUT
V OUT (V)
(V)
Input
IN (V)
Input Voltage:
Voltage :VVIN
(V)
4.0
2.2
1.0
Input Voltage
5.0
Input Voltage
1.9
I OUT=1mA, tr=tf =5μs
6.0
2.3
2.0
XC6216B/D 332
C L=1μF (ceramic), Ta=25℃
2.4
2.0
Time (1ms/div)
7.0
4.0
I OUT=30mA, tr=tf =5μs
C L=1μF (ceramic), Ta=25℃
3.1
Time (1ms/div)
Output Voltage:
OUT (V)
Voltage :VVOUT
(V)
4.0
6.0
Voltage :VVIN
Input Voltage:
IN (V)
Input
IN (V)
InputVoltage:
VoltageV: VIN
(V)
5.0
2.4
Voltage :VVOUT
(V)
Output Voltage:
OUT (V)
6.0
C L=1μF (ceramic), Ta=25℃
Output
OutputVoltage
Voltage:: VOUT
V OUT (V)
(V)
XC6216B/C/D 202
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Line Transient Response (Continued)
XC6216B/D 502
I OUT=30mA, tr=tf =5μs
C L=1μF (ceramic), Ta=25℃
C L=1μF (ceramic), Ta=25℃
5.3
8.0
Input Voltage
7.0
5.2
5.1
Output Voltage
5.0
5.0
4.0
4.9
3.0
4.8
5.3
Input Voltage
7.0
5.2
6.0
5.0
5.0
4.0
4.9
3.0
4.8
Time (1ms/div)
Time (1ms/div)
XC6216B/D C02
XC6216B/D C02
I OUT=1mA, tr=tf =5μs
I OUT=30mA, tr=tf =5μs
C L=1μF (ceramic), Ta=25℃
C L=1μF (ceramic), Ta=25℃
16.0
12.3
15.0
Input Voltage
14.0
12.2
13.0
12.1
Output Voltage
12.0
12.0
11.0
10.0
Voltage :VVIN
Input Voltage:
IN (V)
Input
Input Voltage
Voltage:: VVIN
(V)
IN (V)
15.0
12.4
OutputVoltage
Voltage:
V OUT (V)
Output
: VOUT
(V)
16.0
5.1
Output Voltage
12.4
12.3
Input Voltage
14.0
12.2
13.0
12.1
Output Voltage
12.0
12.0
11.9
11.0
11.9
11.8
10.0
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
6.0
5.4
Output
Voltage:
V OUT (V)
(V)
Output
Voltage
: VOUT
9.0
Input
InputVoltage
Voltage:: VIN
V IN(V)
(V)
Input Voltage
Voltage::VVIN
IN (V)
8.0
5.4
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
(V)
9.0
XC6216B/D 502
I OUT=1mA, tr=tf =5μs
11.8
Time (1ms/div)
Time (1ms/div)
(7) Load Transient Response
XC6216B/C/D 202
XC6216B/D 332
VIN=5.3V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
4
120
Output Voltage
3
90
2
60
30
1
Output Current
30
5
4
0
Time (1ms/div)
120
Output Voltage
3
90
2
60
30m
1
1m
0
150
Output Current
30
Output Current : IOUT (mA)
150
Output Vltage : VOUT (V)
5
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
VIN=4.0V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
1m
0
0
Time (1ms/div)
21/29
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(7) Load Transient Response (Continued)
XC6216B/D 502
XC6216B/D C02
VIN=14.0V, tr=tf=5us
7
150
14
150
6
120
13
120
90
4
60
30m
Output Current
3
30
Output Voltage : VOUT (V)
Output Voltage
5
1m
2
Output Voltage
12
90
11
60
9
0
Output Current
30
10
30
1m
Output Current : IOUT (mA)
CIN=CL=1.0uF(ceramic), Ta=25℃
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
VIN=7.0V, tr=tf=5us
CIN=CL=1.0uF(ceramic), Ta=25℃
0
Time (1ms/div)
Time (1ms/div)
(8) Input Rise Time
XC6216B/C/D 202
VIN=4.0V, tr=5μs
6
6
4
0
3
Output Voltage
-2
2
-4
1
-6
4
5
2
4
0
2
-4
1
-6
0
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
I OUT=30mA, C L=1uF (ceramic),Ta=25℃
8
8
7
6
6
2
5
Output Voltage
4
-2
3
-4
2
-6
Time (1ms/div)
Input Voltage : VIN (V)
Input Voltage
Output Voltage : VOUT (V)
Input Voltage : VIN (V)
XC6216B/D 332
VIN=4.0V, tr=5μs
4
22/29
0
Time (1ms/div)
XC6216B/D 332
-8
3
-2
Time(1ms/div)
0
Output Voltage
OutputVoltage:
VoltageV: VOUT
(V)
Output
OUT (V)
2
Input
VIN
InputVoltage
Voltage:: V
(V)
IN (V)
5
Output
(V)
Output Voltage
Voltage::VVOUT
OUT (V)
Input
IN (V)
InputVoltage:
Voltage V
: VIN
(V)
Input Voltage
6
6
Input Voltage
4
8
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
Input Voltage
8
7
4
6
2
5
0
Output Voltage
4
-2
3
-4
2
1
-6
1
0
-8
0
Time (1ms/div)
Output Voltage : VOUT (V)
6
XC6216B/C/D 202
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Input Rise Time (Continued)
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
Input Voltage
8
8
7
6
4
6
2
5
Output Voltage
4
6
4
5
2
Output Voltage
0
-4
2
1
-6
1
0
-8
0
-4
2
-6
-8
Time (1ms/div)
Time (1ms/div)
XC6216B/D C02
XC6216B/D C02
VIN=4.0V, tr=5μs
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
15
15
10
12
Output Voltage
0
9
-5
6
-10
-15
InputVoltage
Voltage:
V IN(V)
(V)
Input
: VIN
5
18
Output
VOUT
(V)
Output Voltage
Voltage:: V
OUT (V)
Input Voltage
Input Voltage
12
Output Voltage
0
9
-5
6
3
-10
3
0
-15
0
Time (1ms/div)
XC6216B/C/D 202
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
XC6216B/C/D 202
VIN=4.0V, tr=5μs
6
6
CE Input Voltage
5
2
4
0
3
Output Voltage
-2
2
-4
1
-6
0
Time (1ms/div)
CE
: VCE
CEInput
InputVoltage
Voltage:
V CE(V)
(V)
4
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
6
CE Input Voltage
Output
: VOUT
OutputVoltage
Voltage:
V OUT (V)
(V)
CE
VCE
(V)
CE Input
Input Voltage
Voltage:: V
CE (V)
15
5
Time (1ms/div)
(9) CE Rise Time
18
4
5
2
4
3
0
Output Voltage
-2
2
-4
1
-6
0
Time(1ms/div)
23/29
Output
Voltage:
V OUT(V)
(V)
Output
Voltage
: VOUT
10
Voltage:: VVIN
IN (V)
Input Voltage
4
3
3
6
7
Input Voltage
-2
-2
15
8
Output
: VOUT
OutputVoltage
Voltage:
V OUT(V)
(V)
0
Input
Voltage
: VIN
Input
Voltage:
V IN(V)
(V)
Input
InputVoltage
Voltage:: VIN
V IN(V)
(V)
6
VIN=4.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
OutputVoltage
Voltage:: VOUT
V OUT (V)
Output
8
XC6216B/D 502
VIN=4.0V, tr=5μs
Output
Voltage
: VOUT
Output
Voltage:
V OUT(V)
(V)
XC6216B/D 502
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) CE Rise Time (Continued)
XC6216B/D 332
XC6216B/D 332
VIN=5.3V, tr=5μs
7
2
5
4
Output Voltage
-2
3
-4
2
-6
-8
CE
CEInput
InputVoltage
Voltage:: VCE
V CE (V)
6
6
Output
(V)
Output Voltage
Voltage:: VVOUT
OUT (V)
4
6
2
5
0
4
-2
-6
1
0
-8
0
XC6216B/D 502
VIN=7.0V, tr=5μs
VIN=7.0V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
7
6
6
2
5
Output Voltage
4
-2
3
-4
2
-6
-8
6
2
5
0
Output Voltage
3
-4
2
1
-6
1
0
-8
0
Time (1ms/div)
XC6216B/D C02
VIN=14.0V, tr=5μs
VIN=14.0V, tr=5μs
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
18
15
10
15
10
15
5
12
5
12
CE Input Voltage
Output Voltage
9
0
Output Voltage
9
-5
6
3
-10
3
0
-15
-5
6
-10
-15
Time (1ms/div)
CE
CEInput
InputVoltage
Voltage:: VCE
V CE (V)
(V)
0
18
CE Input Voltage
Output
Voltage
: VOUT
Output
Voltage:
V OUT(V)
(V)
CE
: VCE
CEInput
InputVoltage
Voltage:
V CE(V)
(V)
4
-2
XC6216B/D C02
24/29
7
CE Input Voltage
4
Time (1ms/div)
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
8
Output
(V)
OutputVoltage
Voltage:: VOUT
V OUT (V)
8
(V)
CE Input Voltage
Voltage::VVCE
CE (V)
8
4
15
3
Output Voltage
1
Output Voltage:
Voltage :VVOUT
(V)
Output
OUT (V)
CE
(V)
CEInput
InputVoltage:
VoltageV: CE
VCE
(V)
4
Time (1ms/div)
CE Input Voltage
0
7
2
XC6216B/D 502
6
8
-4
Time (1ms/div)
8
CE Input Voltage
0
Time (1ms/div)
Output
: VOUt
OutputVoltage
Voltage:
V OUT(V)
(V)
0
8
I OUT=30mA, C L=1μF (ceramic),Ta=25℃
OutputVoltage
Voltage:
V OUT(V)
(V)
Output
: VOUT
8
CE Input Voltage
6
CEInput
InputVoltage:
Voltage V: VIN
(V)
CE
CE (V)
VIN=5.3V, tr=5μs
I OUT=1mA, C L=1μF (ceramic),Ta=25℃
8
XC6216/XE6216
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate
XC6216B/C/D 202
XC6216B/C/D 202
VIN=4.0Vdc+0.5Vp-p, I OUT=1mA
PSRRRate:
(dB) PSRR (dB)
Ripple Rejection
70
60
50
40
30
20
10
0
0.01
0.1
1
10
C L=1μF (ceramic),Ta=25℃
90
80
80
70
60
50
40
30
20
10
0
0.01
100
0.1
1
XC6216B/D 332
VIN=4.0Vdc+0.5Vp-p, I OUT=30mA
C L=1μF (ceramic),Ta=25℃
70
60
50
40
30
20
10
0.1
1
10
C L=1μF (ceramic),Ta=25℃
90
Ripple Rejection
PSRRRate:
(dB) PSRR (dB)
80
0
0.01
80
70
60
50
40
30
20
10
0
0.01
100
0.1
Frequency
: f (kHz)
Ripple
Frequency:
f (kHz)
100
VIN=7.0Vdc+0.5Vp-p, I OUT=30mA
C L=1μF (ceramic),Ta=25℃
C L=1μF (ceramic),Ta=25℃
90
80
80
Ripple Rejection
Rate:
PSRR
(dB)PSRR (dB)
Ripple Rejection
PSRR Rate:
(dB) PSRR (dB)
10
XC6216B/D 502
VIN=7.0Vdc+0.5Vp-p, I OUT=1mA
70
60
50
40
30
20
10
0
0.01
1
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
XC6216B/D 502
90
100
XC6216B/D 332
VIN =5.3Vdc+0.5Vp-p, I OUT=1mA
90
10
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
Ripple Rejection
Rate: PSRR (dB)
PSRR (dB)
Ripple
Ripple Rejection
Rejection Rate:
Rate: PSRR
PSRR (dB
(dB)
VIN=4.0Vdc+0.5Vp-p, I OUT=30mA
C L=1μF (ceramic),Ta=25℃
90
0.1
1
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
10
100
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
25/29
XC6216/XE6216 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Time (Continued)
XC6216B/D C02
XC6216B/D C02
VIN=VCE=14.0Vdc+0.5Vp-p, I OUT=30mA
VIN=VCE=14.0Vdc+0.5Vp-p, I OUT=1mA
C L=1μF (ceramic),Topr=25℃
80
70
60
50
40
30
20
0.1
1
10
Ripple
Frequency:
f (kHz)
Frequeency
: f (kHz)
26/29
80
70
60
50
40
30
20
10
10
0
0.01
C L=1μF (ceramic),Topr=25℃
90
Ripple Rejection
Rate: PSRR (dB)
PSRR (dB)
Ripple Rejection
PSRRRate:
(dB) PSRR (dB)
90
100
0
0.01
0.1
1
Ripple
Frequency:
f (kHz)
Frequency
: f (kHz)
10
100
XC6216/XE6216
Series
■PACKAGING INFORMATION
●SOT-89-5
●SOT-25
4.5±0.1
2.9±0 .2
4
(0.4)
MIN 0 .2
3
+0.1
(0 .9 5 )
+ 0 .0 3
0.4 - 0 .0 2
Φ1.0
2.5±0.1
+0.2
-0.1
2
2 .8±0 .2
1 .6
1
2
5
0 .0 5±0 .0 5
0.42±0.06
0.42±0.06
5°
4
1.0±0.2
0.42±0.06
5
4.25±0.25
0.4
1.6 +- 00 .1.2 5
+0.1
-0.05
5°
0 .1 5 -0.05
1 .1 ±0.1
1 .1 5±0.1 5
1
2
1.0±0.2
1 .9±0 .2
3
+ 0 .0 3
0.42±0.06
0.47±0.06
8
°
1.5±0.1
(0.1)
8
°
0.4 - 0 .0 2
0.42±0.06
1.5±0.1
●USP-6C
1.5±0.1
●USP-6C Recommended Pattern Layout
●USP-6C Recommended Metal Mask Design
27/29
XC6216/XE6216 Series
■PACKAGING INFORMATION (Continued)
●SOT-223
●SOT-89
.
●TO-252
6. 55±0. 2
0. 5 ±0. 1
6. 1 ±0. 15
0. 85±0. 25
.
9. 9±0. 55
1. 1±0. 25
5. 3±0. 2
0. 75±0. 15
0. 5 ±0. 1
(2. 28)
28/29
(2. 28)
M I N4 . 32
0. 75±0. 15
0. 1
2. 3 -+0.
15
0. 75±0. 15
.
XC6216/XE6216
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this catalog is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this catalog.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this catalog.
4. The products in this catalog are not developed, designed, or approved for use with such
equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this catalog within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this catalog may be copied or reproduced without the
prior permission of Torex Semiconductor Ltd.
29/29