BOARDCOM BCM5703S 10/100/1000base-t controller with integrated transceiver Datasheet

BCM5703S
®
10/100/1000BASE-T CONTROLLER WITH INTEGRATED TRANSCEIVER
SUMMARY OF BENEFITS
FEATURES
• Single-chip solution for LAN on Motherboard (LOM) and
•
•
•
•
•
network interface card (NIC) applications
• Integrated SerDes interface
• 10/100/1000 Mbps triple-speed media access controller (MAC)
• Host interfaces
- PCI v2.2, 32/64-bit, 33/66 MHz
- PCI-X v1.0 64-bit, 66/100/133 MHz
• Ultra-deep 96 KB, on-chip packet buffer
• Dual high-speed RISC cores with 16-KB caches
Programmable, in-line packet classification
• SMBus controller
• On-chip power circuit controller and Wake on LAN power
switching circuit
Performance features
• TCP, IP, UDP checksum
• TCP segmentation
• CPU task offload
• Adaptive interrupts
• Ultra-deep 96 KB packet buffer
Robust manageability
• PXE 2.0 remote boot
• Alert Standard Format (ASF 1.0 support)
• Wake on LAN
• Statistics gathering: SNMP MIB II, Ethernet-like MIB,
Ethernet MIB (802.3x, Clause 30)
• Comprehensive diagnostic and configuration software suite
• ACPI 1.1a compliant (multiple power modes)
Advanced network features
• Priority queuing (802.1p layer 2 priority encoding; support for
four priority queues)
• Virtual LANs (802.1q VLAN tagging; support for up to 64
VLANs)
• Jumbo frames (9 KB)
• 802.3x flow control
Advanced server features
• Link aggregation: 802.3ad, GEC/FEC, Smart Load
Balancing™ (supports heterogeneous teams)
• Heterogeneous mixed-speed failover
• Hot-Plug PCI support
Low power, 0.13-µm CMOS design
•
• 300-pin HBGA package
• 3.3V I/Os (5V tolerant)
• JTAG
• Industry’s smallest 10/100/1000 MAC/PHY solution (power
•
•
•
•
•
•
•
•
and space optimized for LOM and low-profile NIC
applications)
Integrated 1.25-Gbps SerDes
• IEEE 802.3z compliant
• For fiber on backplane applications
Futureproof
• PCI-X interface, on-chip programmable CPUs, ASF support
Performance focused (optimized for throughput and CPU
utilization)
• Adaptive interrupts
• PCI-X® eliminates PCI bottlenecks
• Ultra-deep 96-KB packet buffer lowers CPU utilization and
averts PCI congestion
• CPU task offloads reduce CPU utilization level
Robust and highly manageable
• PXE 2.0, ACPI 1.1, Wake on LAN, ASF 1.0, IPMI 1.5
• Broadcom EyeOpener® adaptive equilization technology
(allows longer backplane lengths and robust signal integrity)
Advanced features
• VLAN, priority queuing, jumbo frames
• RISC processors for advanced packet classification
Server-class reliability, availability, and performance features
• Link aggregation and load balancing
- Switch-dependent
• 802.3ad (LACP), generic trunking (GEC/FEC)
- Switch- and NIC-independent
• Smart Load Balancing™ (unique technology that supports
heterogeneous teams, and can operate with any switch)
• Failover
- Smart Load Balancing allows heterogeneous failover
• Hot-Plug PCI support
Low power for zero airflow implementations
• 0.13-µm CMOS design
• Advanced power management
Space savings for LOM
• 300-pin HBGA package
• No external memory
• Integrated power circuitry
BCM5703S OVERVIEW
1.25-Gbps
SerDes
Buffer
Memory
Memory
Controller
SerDes
Interface
Dual Processor
PCI/PCI-X
PLL
LED Control
LED Signals
PCI/PCI-X
Bus
32-KB
Memory
SMBus
EEPROM
Control
PLL
PCI
CLK
SMB Interface EEPROM Interface
Target Applications of the BCM5703S
The BCM5703S 10/100/1000BASE-T Gigabit Ethernet media access
control and serializer/deserializer (SerDes) is a fully integrated interface
solution for high-performance network applications. The BCM5703S is
a highly-integrated solution combining a triple-speed IEEE 802.3compliant media access controller (MAC), PCI and PCI-X bus
interfaces, an on-chip buffer memory, and an integrated SerDes
transceiver in a single device. The BCM5703S is fabricated in a lowvoltage 0.13-µm CMOS process, providing a low-power system
solution. By itself the BCM5703S provides a complete single-chip
Gigabit Ethernet NIC or LOM solution.
Support for the following 802.3 functions is featured in the MAC: VLAN
tagging, layer 2 priority encoding, link aggregation, and full-duplex flow
control.
The BCM5703S provides both PCI v2.2 and PCI-X v1.0 bus interfaces.
It also provides large on-chip buffer memory for stand-alone operation.
Dual, on-chip, high-performance processors enable custom frame
processing features, including TCP segmentation.
Along with complying with the IEEE 802.3z specification, several
enhancements, such as ultra-low jitter technology, have been added to
make designs even more robust.
Network Interface Cards (NIC) designs
Single Port
1000
BASE-SX
PCI 2.2 Adapters
PCI-X v1.0 Adapters
1000
BASE-LX
PCI 2.2 Adapters
PCI-X v1.0 Adapters
Dual Port
10/1000
BASE-SX
PCI 2.2 Adapters
LAN on Motherboard (LOM) designs
Single Port
1000
BASE-SX
PCI 2.2 LOM
PCI-X v1.0 LOM
Dual Port
1000
BASE-SX
PCI 2.2 LOM
PCI-X v1.0 LOM
Gigabit Ethernet Network Interface Cards (NICs)
and LAN-on Motherboard (LOM) applications for
Desktop and Mobile PCs.
BCM5703S Operating Systems
•
•
•
•
•
•
•
•
Microsoft® Windows® 98, NT®4.0, 2000, XP, NT64
Linux® 2.2, 2.4
Linux64®
NetWare® 4.x, 5.x, 6.x
PXE 2.0
Solaris™ x86
UnixWare® 7.0
OpenServer™ 5.0
Broadcom®, the pulse logo, Connecting everything®, Smart Load Balancing™, and EyeOpener® are
trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other
countries. All other trademarks mentioned are the property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2004 by BROADCOM CORPORATION. All rights reserved.
5703S-PB05-R
01/05/05
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: [email protected]
Web: www.broadcom.com
Similar pages