Kingbright APT2012MGC 2.0x1.25mm smd chip led lamp Datasheet

2.0x1.25mm SMD CHIP LED LAMP
APT2012MGC
MEGA GREEN
Description
Features
2.0mmx1.25mm SMT LED,0.75mm THICKNESS.
The Mega Green source color devices are
LOW POWER CONSUMPTION.
made with DH InGaAlP on GaAs substrate Light
WIDE VIEWING ANGLE.
Emitting Diode.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAA7633
REV NO: V.5
DATE: MAR/12/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001819
Selection Guide
Part No.
Dice
APT2012MGC
Iv (mcd)
@ 20mA
Lens Type
MEGA GREEN (InGaAlP)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
18
70
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Mega Green
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
574
nm
IF=20mA
Mega Green
568
nm
IF=20mA
Spectral Line Half-width
Mega Green
26
nm
IF=20mA
C
Capacitance
Mega Green
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Mega Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Mega Green
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Mega Green
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA7633
REV NO: V.5
DATE: MAR/12/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001819
Mega Green
APT2012MGC
SPEC NO: DSAA7633
REV NO: V.5
DATE: MAR/12/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001819
APT2012MGC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
SPEC NO: DSAA7633
REV NO: V.5
DATE: MAR/12/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001819
Similar pages