BeRex BT331 700-2700 mhz 1.5~2.0w power amplifier Datasheet

BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Device Features
•
•
•
•
•
•
OIP3 = 51.0 dBm @ 1900 MHz
Gain = 19.5 dB @ 900 MHz
Output P1 dB = 33.3 dBm @ 1900 MHz
50 Ω Cascadable
Highly Reliable InGaP/GaAs HBT Technology
Lead-free/RoHS-compliant SOIC-8 SMT package
YY = Year, WW = Work week,
XX = Wafer Number
Typical Performance1
Product Description
BeRex’s BT331 is a high power and a high
dynamic range amplifier in a low cost surface mount package(SOIC-8) with a RoHScompliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices
fabricated with InGaP GaAs technology.
This device is designed for use where high
linearity is required and features high OIP3
and Power with low consumption current
(400mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port.
All devices are 100% RF/DC tested.
Frequency
Unit
900
1900
2140
2450
2600
Gain
19.5
14
13
12
S11
-16
-14
-15
-20
S22
-11
OIP3
50
2
-11
51
-12
-10
51
MHz
12.1
3500
10.7
-19
-20.4
dB
-12.7
-13.0
dB
47
45.8
dBm
dBm
50
dB
P1dB
31.5
33.3
32.3
31
31.2
29.5
IS-95C ACPR
23.3
-
-
-
-
-
dBm
-
23.3
23.4
21.5
21.5
20.1
dBm
4.8
5
5
5.3
5.4
6.2
dB
WCDMA ACLR
Noise Figure
1
Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.
OIP3 _ measured with two tones at an output of 20 dBm per tone separated by 1 MHz.
2
*ACPR CH Power is measured at 55dBc, ACLR CH Power _ measured at 50dBc.
*ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob.
*ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob.
Applications
Min.
• Base station Infrastructure/RFID
• Commercial/Industrial/Military wireless system
Application Circuits
Bandwidth
IC @ (Vc = 5V)
VC
RTH
Vcc
RF In
RF Out
BT331
DC
Block
DC
Block
*external matching circuit: refer to the page 4 to 16.
415
5.0
10.0
Max.
Unit
2700
455
MHz
mA
V
°C/W
Absolute Maximum Ratings
Bypass
RF Choke
Typical
700
360
Parameter
Operating Case Temperature
Storage Temperature
Junction Temperature
Operating Voltage
Supply Current
Input RF Power
Rating
-40 to +85
-55 to +155
+220
Unit
°C
°C
°C
+5.5
900
28
V
mA
dBm
*Operation of this device above any of these parameters may result in permanent damage.
BeRex
●website: www.berex.com
●email: [email protected]
1
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
V-I Characteristics
BeRex SOIC-8 Evaluation Board
*Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB
Typical Device Data
S-parameters (Vc=5V, Ic=400mA, T=25°C)
BeRex
●website: www.berex.com
●email: [email protected]
2
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
S-Parameter
(Vdevice = 5.0V, Icc = 400mA, T = 25 °C, calibrated to device leads)
BeRex
Freq
[MHz]
S11
[Mag]
S11
[Ang]
S21
[Mag]
S21
[Ang]
S12
[Mag]
S12
[Ang]
S22
[Mag]
S22
[Ang]
100
500
1000
1500
2000
2500
3000
3500
0.919
0.949
0.941
0.929
0.895
0.847
0.735
0.757
-155.332
168.743
156.029
143.815
131.767
120.721
118.042
125.918
27.202
4.153
2.065
1.444
1.226
1.393
2.132
2.326
171.888
90.122
78.875
71.101
65.133
57.189
32.334
-38.115
0.011
0.010
0.011
0.016
0.019
0.024
0.024
0.007
81.778
35.600
47.384
48.347
50.235
47.782
2.709
-11.874
0.335
0.805
0.833
0.840
0.838
0.839
0.848
0.904
151.426
-179.714
170.693
163.704
158.159
153.001
147.516
140.189
4000
0.910
122.065
0.796
-127.288
0.014
66.759
0.495
79.167
●website: www.berex.com
●email: [email protected]
3
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 900 MHz
Schematic Diagram
R1
C7
Vcc
C6
C9
R2
C3 C4 C5
C8
C1
C10
RF_IN
L2
C11
1
8
2
7
3
6
4
5
Tolerance
BOM
L1
RF_OUT
C2
C12
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
L1
L2
R1
R2
PCB Diagram
0603
0603
0603
0603
0603
1206
0603
0603
0603
0603
1008
0603
0603
0603
100pF
100pF
100pF
1nF
1uF
10uF
NC
NC
1pF
3.3pF
10pF
8pF
18nH
8.2nH
4.3KΩ
100Ω
±5%
±5%
±5%
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Notice
1.
2.
3.
4.
5.
PCB: 31mil thick FR4
Distance between the center of
the shunt Inductor(L2) and the
input pin of BT331 _ 6.45 mm.
Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 8.25 mm.
※ BT331 with both input and output ports
opened simultaneously may cause instability. Please See an application note or contact company for application support.
BeRex
●website: www.berex.com
●email: [email protected]
4
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
5
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
6
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 1900 MHz
Schematic Diagram
R1
C7
Vcc
C6
C9
R2
C3 C4 C5
C8
C1
C10
RF_IN
C13
C11
1
8
2
7
3
6
4
5
L1
RF_OUT
C2
C12
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
L1
R1
R2
PCB Diagram
3.
4.
5.
●website: www.berex.com
0603
0603
0603
0603
0603
1206
0603
0603
0603
0603
0603
0603
1008
0603
0603
100pF
100pF
100pF
1nF
1uF
10uF
NC
2pF
10pF
3pF
0.5pF
2.7pF
2.5pF
56nH
4.3KΩ
100Ω
±5%
±5%
±5%
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Notice
1.
2.
BeRex
Tolerance
BOM
PCB: 31mil thick FR4
Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 5.25 mm.
Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 2.25 mm.
●email: [email protected]
7
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
8
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Preliminary Datasheet
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
9
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 2140 MHz
Schematic Diagram
R1
C7
Vcc
C6
C9
R2
C3 C4 C5
C8
C1
C10
RF_IN
C13
C11
1
8
2
7
3
6
4
5
L1
RF_OUT
C2
C12
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
L1
R1
R2
PCB Diagram
3.
4.
5.
●website: www.berex.com
0603
0603
0603
0603
0603
1206
0603
0603
0603
0603
0603
1008
0603
0603
100pF
100pF
100pF
1nF
1uF
10uF
NC
5pF
NC
1.8pF
0.5pF
2pF
2pF
22nH
5.6KΩ
100Ω
±5%
±5%
±5%
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Notice
1.
2.
BeRex
Tolerance
BOM
PCB: 31mil thick FR4
Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 5.25 mm.
Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 2.25 mm.
●email: [email protected]
10
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
11
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
12
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 2450 MHz
Schematic Diagram
R1
C7
Vcc
C6
C9
R2
C3 C4 C5
C8
C1
C10
RF_IN
C13
C11
1
8
2
7
3
6
4
5
L1
RF_OUT
C2
C12
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
L1
R1
R2
PCB Diagram
3.
4.
5.
●website: www.berex.com
0603
0603
0603
0603
0603
1206
0603
0603
0603
0603
1008
0603
0603
100pF
100pF
100pF
1nF
1uF
10uF
NC
NC
NC
1pF
0.5pF
1.8pF
1pF
5.7nH
5.6KΩ
100Ω
±5%
±5%
±5%
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Notice
1.
2.
BeRex
Tolerance
BOM
PCB: 31mil thick FR4
Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 6.0 mm.
Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 2.5 mm.
●email: [email protected]
13
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
14
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
15
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 2600 MHz
Schematic Diagram
R1
C7
Vcc
C6
C9
R2
C3 C4 C5
C8
C1
C10
RF_IN
C13
C11
1
8
2
7
3
6
4
5
L1
RF_OUT
C2
C12
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
L1
R1
R2
PCB Diagram
3.
4.
5.
●website: www.berex.com
0603
0603
0603
0603
0603
1206
0603
0603
0603
0603
0603
0603
1008
0603
0603
100pF
100pF
100pF
1nF
1uF
10uF
NC
5pF
2.5pF
1pF
0.5pF
1.8pF
1pF
5.7nH
5.6KΩ
100Ω
±5%
±5%
±5%
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Notice
1.
2.
BeRex
Tolerance
BOM
PCB: 31mil thick FR4
Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 5.25 mm.
Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 1.5 mm.
●email: [email protected]
16
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
17
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
●email: [email protected]
18
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance (Pout vs Icc)
BeRex
●website: www.berex.com
●email: [email protected]
19
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Package Outline Dimension
BeRex
●website: www.berex.com
●email: [email protected]
20
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
PCB Mounting
Note : All dimension are in millimeters
PCB lay out _ on BeRex website
Package Marking
YY = Year, WW = Working Week,
XX = Wafer No.
Tape & Reel
Packaging information:
SOIC8
SOIC8-Part orientation
Tape Width (mm): 12
Reel Size (inches): 7
Device Cavity Pitch (mm): 8
Direction of feed
BeRex
Devices Per Reel: 1000
●website: www.berex.com
●email: [email protected]
21
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate
thin whisker growth concerns.)
MSL / ESD Rating
ESD Rating:
Class 2
Value:
Passes <4000V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114B
MSL Rating:
Level 3 at +265°C convection reflow
Standard:
JEDEC Standard J-STD-020
NATO CAGE code:
2
BeRex
N
9
6
F
●website: www.berex.com
●email: [email protected]
22
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. G
Similar pages