SM2G54,SM2L54 TOSHIBA BI−DIRECTIONAL TRIODE THYRISTOR SILICON PLANAR TYPE SM2G54,SM2L54 AC POWER CONTROL APPLICATIONS Unit: mm Repetitive Peak Off−State Voltage : VDRM = 800V R.M.S. On−State Current : IT (RMS) = 2A High Commutation (dv / dt) : (dv / dt) c = 5V / µs (Min.) MAXIMUM RATINGS CHARACTERISTIC Repetitive Peak Off−State Voltage R.M.S. On−State Current (Full Sine Waveform) Peak One Cycle Surge On−State Current (Non-Repetitive) 2 I t Limit Value SYMBOL RATING UNIT VDRM 800 V IT (RMS) 2 A ITSM 2 8 (50Hz) A 8.8 (60Hz) 2 I t 0.32 A s Critical Rate of Rise of On−State Current (Note) di / dt 50 A / µs Peak Gate Power Dissipation PGM 3 W PG (AV) 0.3 W Peak Gate Voltage VFGM 10 V Peak Gate Current IGM 1.6 A Tj −40~125 °C Tstg −40~125 °C Average Gate Power Dissipation Junction Temperature Storage Temperature Range Note: 1 : T1 2 : T2 3 : GATE JEDEC JEITA TOSHIBA Weight: 0.82g − − − di / dt test condition VDRM = 400V, ITM ≤ 3A, tgw ≥ 10µs, tgr ≤ 250ns, igp = IGT × 2.0 1 2004-07-15 SM2G54,SM2L54 ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT − − 20 µA T2 (+) , Gate (+) − − 1.5 T2 (+) , Gate (−) − − 1.5 III T2 (−) , Gate (−) − − 1.5 I T2 (+) , Gate (+) − − 10 T2 (+) , Gate (−) − − 10 T2 (−) , Gate (−) − − 10 − − 2.0 V 0.2 − − V VD = 12V, ITM = 1A − − 10 mA Junction to Ambient, AC − − 83 °C / W Repetitive Peak Off−State Current TEST CONDITION IDRM VDRM = 800V VGT VD = 12V, RL = 20Ω I Gate Trigger Voltage Gate Trigger Current II II IGT VD = 12V, RL = 20Ω III Peak On−State Voltage VTM ITM = 3A Gate Non−Trigger Voltage VGD VD = 800V, Tc = 125°C Holding Current Thermal Resistance IH Rth (j−a) V mA Critical Rate of Rise of Off−State Voltage dv / dt VDRM = 800V, Tj = 125°C Exponential Rise 50 − − V / µs Critical Rate of Rise of Off−State Voltage at Communication (dv / dt) c VDRM = 400V, Tj = 80°C (di / dt) c = − 0.5A / ms 5 − − V / µs MARKING Lot No. (Weekly code) Part No. (or brevity code) M2G54 or M2L54 With underline: Lead (Pb)-Free or Lead (Pb)-Free Finish 2 2004-07-15 SM2G54,SM2L54 3 2004-07-15 SM2G54,SM2L54 Ta MAXT(AV) － IT(RMS) PT(AV) － IT(RMS) 140 MAXIMUM ALLOWABLE AMBIENT TEMPERATURE Ta MAX.( °C) 3 2.5 2 1.5 1 0.5 0 120 100 80 60 40 20 0 0 0.5 1 1.5 2 2.5 0 R.M.S. ON-STATE CURRENT IT(RMS) 0.5 1 IT(RMS) 1.5 2 R.M.S. ON-STATE CURRENT IT(RMS) TRANSIENT THERMAL IMPEDANCE (JUNCTION TO AMBIENT) TRANSIENT THERMAL IMPEDANCE rth(j-a) .( °C/W) AVERAGE ON-STATE POWER PT (AV) (W) 3.5 100 10 1 0.1 0.001 0.01 0.1 1 10 100 1000 TIME t (s) 4 2004-07-15 SM2G54,SM2L54 RESTRICTIONS ON PRODUCT USE 000707EAA • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • The information contained herein is subject to change without notice. 5 2004-07-15