10/100BASE-TX SINGLE PORT TRANSFORMER MODULES With Various Transmit Turns Ratios For RoHS part add suffix NL4 Peak solder temperature rating per Table 5-2 in IPC/JEDEC J-STD-020C°°°° Compact symmetrical size facilitates chip shooter placement and reduces manufacturing time Meets IEEE 802.3 specification Electrical Specifications @ 25°C — Operating Temperature 0°C to 70°C Part Number RoHS H1112 H1113 H1126 1. 2. 3. 4. NL3c 2, 3c 2, 3c Insertion Return Loss Differential to Common Crosstalk Loss Transmit Mode Rejection (dB MIN) (dB MAX) (dB MIN) (dB TYP) 100kHZ-100MHz 1-30MHz 40MHz 50MHz 60-80MHz 30MHz 60MHz 100MHz 200MHz 1MHz 30MHz 60MHz 100MHz 1CT:1CT 1.2 -16 -14 -13 -12 -59 -49 -42 -37 -60 -40 -40 -35 1CT:1CT 1.2 -16 -14 -13 -12 -55 -45 -38 -33 -60 -40 -40 -35 1CT:1.414CT 1.2 -16 -14 -13 -12 -59 -49 -42 -37 -60 -40 -40 -35 Turns Ratio Transmit Hipot (Vrms MIN) 1500 1500 1500 For Tape & Reel packaging, add a “T” suffix at the end of the part number when ordering e.g. H1112T. Contact Pulse for RoHS compliant part availability. MSL=Moisture Sensitivity Level a=1 b=2 c=3 d=4 Add suffix NL for RoHS compliant parts, e.g. H1112 changes to H1112NL or H1112NLT (for Tape & Reel). Mechanical H1112, H1113, H1126 5X .079 .395 2,00 10,03 12X .020 0,51 .475 .610 12,07 15,49 H11XX Date Code Country of Origin .079 2,00 .395 10,03 .079 2,00 .583 14,81 .580 14,73 .460 11,68 .192 4,88 .004/0,10 12 SURFACES .005 WASH 0,13 .040 1,02 12X 0°-8° .080 2,03 Weight . . . . . . . . . . . .1.7 grams Tape & Reel . . . . . . . . .350/reel Tube . . . . . . . . . . . . . . .30/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 1 H326.D (6/06) 10/100BASE-TX SINGLE PORT TRANSFORMER MODULES With Various Transmit Turns Ratios Schematics H1113 H1112, H1126 * TD+ 1 TRANSMIT RECEIVE TRANSMIT TD- 2 * TD+ 1 12 TX+ 12 TX+ TD- 2 11 TX- 11 TX10 TCT TDC 3 10 TCT TDC 3 RDC 4 9 RCT RDC 4 9 RCT RD+ 5 8 RX+ RD+ 5 8 RX+ RD- 6 RECEIVE RD- 6 7 RX- 1:1 1:1 7 RX- * Reference Electrical Specifications chart for turns ratio. Tape and Reel Specifications .157 3,99 USER DIRECTION OF FEED B .079 2,00 A R .015 0,38 .059 +.004/-.000 1,50 +.0,11/-0,00 .069 1,75 7. o MAX. DRAFT ANGLE 3.0 .453 11,51 B .650 16,51 A .945 .012 ± 24,0 0,30 .059 1,50 .945 24,0 .150 3,81 .600 .454 15,24 11,53 .016 0,41 SECTION A - A .480 12,19 .207 5,26 .240 6,07 SECTION B - B For More Information: Pulse Worldwide Headquarters Pulse European Headquarters Pulse China Headquarters 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 Einsteinstrasse 1 71083 Herrenberg Germany No. 1 Industrial District Changan, Dongguan China TEL: 86 769 85538070 FAX: 86 769 85538870 TEL: 49 7032 7806 0 FAX: 49 7032 7806 12 Pulse North China Pulse South Asia Pulse North Asia Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China TEL: 86 21 54643211/2 FAX: 86 21 54643210 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: 886 3 4641811 FAX: 886 3 4641911 TEL: 65 6287 8998 FAX: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2006. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 2 H326.D (6/06)