Kingbright APHK1608TGC 1.6x0.8mm smd chip led lamp Datasheet

1.6x0.8mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APHK1608TGC
GREEN
Features
Description
●1.6mmx0.8mm SMT LED, 0.7mm THICKNESS.
The Green source color devices are made with InGaN
●LOW POWER CONSUMPTION.
on SiC Light Emitting Diode.
●WIDE VIEWING ANGLE.
Static electricity and surge damage the LEDS.
●IDEAL FOR BACK LIGHT AND INDICATOR.
It is recommended to use a wrist band or
●VARIOUS COLORS AND LENS TYPES AVAILABLE.
anti-electrostatic glove when handling the LEDs.
●PACKAGE : 2000PCS / REEL.
●MOISTURE SENSITIVITY LEVEL : LEVEL 4.
●RoHS COMPLIANT.
All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAD1117
REV NO: V.4
DATE: NOV/06/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000415
Selection Guide
Dice
Part No.
APHK1608TGC
Iv (mcd) [2]
@ 20mA
Lens Type
GREEN (InGaN)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
70
150
90°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
500
nm
IF=20mA
Green
505
nm
IF=20mA
Spectral Line Half-width
Green
30
nm
IF=20mA
C
Capacitance
Green
56
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.6
4.4
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
110
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1117
REV NO: V.4
DATE: NOV/06/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000415
Green
APHK1608TGC
SPEC NO: DSAD1117
REV NO: V.4
DATE: NOV/06/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000415
APHK1608TGC
Recommended Soldering Pattern
(Units: mm ; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1117
REV NO: V.4
DATE: NOV/06/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000415
PACKING & LABEL SPECIFICATIONS
APHK1608TGC
SPEC NO: DSAD1117
REV NO: V.4
DATE: NOV/06/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000415
Similar pages