Optoway SPS-7110VW-1T1RG 1 *********************************************************************************************************************************************************************** SPS-7110VW-1T1RG (RoHS Compliant) 1310 nm / 1.5 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver ********************************************************************************************************************************************************************** DESCRIPTION FEATURES FEATURES The SPS-7110VW-1T1RG is a optical single mode transmitter/receiver module designed to transmit/receive optical serial digital signals as defined in SMPTE 292M/297M/259M. It supports from 50 Mbps to 1.5 Gbps and is specifically designed for transmitted the SMPTE 292M, SMPTE 297M and SMPTE 259M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It is with 1310 nm laser transmitters. The transmitter can transmit signal from 50 Mbps to 1.5 Gbps with up to 30 km of single-mode fiber. A maximum distance of 21 km is achievable with 1.5 Gbps pathological signals. l SMPTE 292M/297M/259M Compatible l Hot-Pluggable SFP Footprint LC Optical Transceiver l Speed from 50 Mbps to 1.5 Gbps with up to 30 km Single-mode Fiber l Distance up to 21 km for 1.5G-SDI l Support Video Pathological Patterns for SD-SDI and HD-SDI l Single Transmitter with Simplex LC l Single Receiver with Simplex LC l Based on Industry Standard SFP l SFF-8472 Digital Diagnostic Function l TTL Laser Disable Input l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable l Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SMPTE 292M/297M/259M Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P/No. Type Bit Rate (Mb/s) SPS-7110VW-1T1RG 1-TX+1-RX 50 to 1500 TX λ (nm) 1310 Power (dBm) 0 to -7 RX RoHS Package Temp λ (oC) Compliant Sen. (nm) (dBm) 1260/1620 0 to -20 LC SFP with DMI 0 to 70 Yes LINK DISTANCE SDI Bit Rate Max. Link Distance (km) HD-SDI 1.485Gbps 21 SD-SDI 270Mbos 30 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-7110VW-1T1RG 2 *********************************************************************************************************************************************************************** ABSOLUTE MAXIMUM RATINGS Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage ESD Tolerance on all pins Relative Humidity Symbol Tstg Tc Vcc Min -40 0 0 --- 5 Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Case Temperature Tc Baud Rate Power Supply Current Icc Min 3.13 0 50 Max 85 70 4 1 95 Units o C o C V KV HBM % RH Typ 3.3 Max 3.47 70 1500 280 1485 200 Notes non-condensing Units / Notes V o C Mb/s mA Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Relative Intensity Noise Po λ ∆λ ER RIN -7 1290 --5 Optical Rise Time / Fall Time tr / tf Electrical Differential Input Voltage Disable Input Voltage -- Low Disable Input Voltage -- High SCL, SDA 1. 2. V IH - VIL VTDIS,L VTDIS,H V OH V OL Typ Max Units 1310 0 1330 3 -120 270 800 1.5 dBm nm nm dB dB/Hz ps ps ns 1200 0.8 Vcc+0.3 Vcc+0.3 0.5 mVp-p V V V V 200 0 2.0 2.5 0 Notes 1 At 25oC RMS (σ) 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled Output power is power coupled into a 9/125 µm single mode fiber. 20% to 80%, unfiltered. Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Wavelength of Operation Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Electrical CML Output (Differential) Optical Rise Time / Fall Time Symbol Sen Pa Pd Min Typ Max Units 1260 0 0 ---31 1 ----- 1620 -18 -20 -21 --6 nm dBm dBm dBm dBm dB dB 850 270 800 1.5 mVp-p ps ps ns -----27 550 tr / tf 660 Notes Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low AC coupled output 3, SMPTE 292M 3, SMPTE 344M 3, SMPTE 259M *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-7110VW-1T1RG 3 *********************************************************************************************************************************************************************** Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA 3. V OL V OH V OH V OL 0 2.5 2.5 0 0.5 Vcc+0.3 Vcc+0.3 0.5 V V V V IOL=-1.6mA, 1 TTL unit load IOH=40µA, 1 TTL unit load 20% to 80%, unfiltered. MODULE DEFINITION Module Definition PIN 5 PIN 6 Interpretation by Host 4 SCL SDA Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-7110VW-1T1RG 4 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name Vee NC NC Vee SCL SDA Vee NC NC NC Vee RXRX+ Vee Vcc RX Vcc TX Vee TX+ TXTX_DIS Function Signal Ground No Connection No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground No Connection No Connection No Connection Signal Ground Negative Differential Output Positive Differential Output Signal Ground Power Supply Power Supply Signal Ground Positive Transmitter Data In Negative Transmitter Data In Transmitter Disable Notes +3.3V±5%, Internal connected AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX1_DIS = HIGH. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-7110VW-1T1RG 5 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC 1 2 3 4 VCC 3.3V 5 4.7K 4.7K 6 7 I2C CLK 8 I2C DATA 9 10 Vee NC TX_DIS TX - NC TX + Vee Vee SCL Vcc_TX SDA Vcc_RX Vee Vee NC RX + NC RX - NC Vee 20 TX_DIS TD - 19 100Ω Differential 18 Re-Clocker TD + 17 16 100nF 10uF VCC 3.3V 1uH 15 1uH 14 13 100nF 10uF 100nF 10uF 12 11 RD + 100Ω Differential Re-Clocker RD - 1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs are internally biased and may not need external bias resistor. PACKAGE DIAGRAM (Units in mm) *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-7110VW-1T1RG 6 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 Subject Initial datasheet Release Date 2008/10/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0