OPTOWAY SPS-7110V

Optoway
SPS-7110V-1T1RG
1
***********************************************************************************************************************************************************************
SPS-7110V-1T1RG
(RoHS Compliant)
1310 nm / 1.5 Gb/s Medium Power Optical SM Transmitter/Receiver
**********************************************************************************************************************************************************************
DESCRIPTION
FEATURES
FEATURES
The SPS-7110V-1T1RG is a optical single mode
transmitter/receiver module designed to transmit/receive
optical serial digital signals as defined in SMPTE
292M/297M/259M. It supports from 50 Mbps to 1.5 Gbps
and is specifically designed for transmitted the SMPTE
292M, SMPTE 297M and SMPTE 259M SDI pathological
patterns. It is with the SFP 20-pin connector to allow hot
plug capability. It is with 1310 nm laser transmitters. The
transmitter can transmit signal from 50 Mbps to 1.5 Gbps
with up to 30 km of single-mode fiber. A maximum
distance of 21 km is achievable with 1.5 Gbps pathological
signals.
l SMPTE 292M/297M/259M Compatible
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Speed from 50 Mbps to 1.5 Gbps with up to 30 km
Single-mode Fiber
l Distance up to 21 km for 1.5G-SDI
l Support Video Pathological Patterns for SD-SDI and
HD-SDI
l Single Transmitter with Simplex LC
l Single Receiver with Simplex LC
l Based on Industry Standard SFP
l TTL Laser Disable Input
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70oC Operation
l Hot Pluggable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l SMPTE 292M/297M/259M Compliant
Electrical-to-Optical Interfaces
l High-density Video Routers
ORDER INFORMATION
P/No.
Type
SPS-7110V-1T1RG
Bit Rate
(Mb/s)
1-TX+1-RX 50 to 1500
TX
λ
(nm)
1310
Power
(dBm)
0 to -7
RX
λ
Sen.
(nm)
(dBm)
1260/1620 0 to -20
Package
Temp
(oC)
RoHS
Compliant
LC SFP
0 to 70
Yes
LINK DISTANCE
SDI
Bit Rate
Max. Link Distance (km)
HD-SDI
1.485Gbps
21
SD-SDI
270Mbos
30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-1T1RG
2
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
ESD Tolerance on all pins
Relative Humidity
Symbol
Tstg
Tc
Vcc
Min
-40
0
0
---
5
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Tc
Baud Rate
Power Supply Current
Icc
Min
3.13
0
50
Max
85
70
4
1
95
Units
o
C
o
C
V
KV HBM
% RH
Typ
3.3
Max
3.47
70
1500
280
1485
200
Notes
non-condensing
Units / Notes
V
o
C
Mb/s
mA
Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Relative Intensity Noise
Po
λ
∆λ
ER
RIN
-7
1290
--5
Optical Rise Time / Fall Time
tr / tf
Electrical
Differential Input Voltage
Disable Input Voltage -- Low
Disable Input Voltage -- High
SCL, SDA
1.
2.
V IH - VIL
VTDIS,L
VTDIS,H
V OH
V OL
Typ
Max
Units
1310
0
1330
3
-120
270
800
1.5
dBm
nm
nm
dB
dB/Hz
ps
ps
ns
1200
0.8
Vcc+0.3
Vcc+0.3
0.5
mVp-p
V
V
V
V
200
0
2.0
2.5
0
Notes
1
At 25oC
RMS (σ)
2, SMPTE 292M
2, SMPTE 344M
2, SMPTE 259M
AC coupled input
TX Output Enabled
TX Ouput Disabled
Output power is power coupled into a 9/125 µm single mode fiber.
20% to 80%, unfiltered.
Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Wavelength of Operation
Sensitivity for SMPTE 292M
1.485 Gb/s
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Optical Return Loss
Electrical
CML Output (Differential)
Optical Rise Time / Fall Time
Symbol
Sen
Pa
Pd
Min
Typ
Max
Units
1260
0
0
---31
1
-----
1620
-18
-20
-21
--6
nm
dBm
dBm
dBm
dBm
dB
dB
850
270
800
1.5
mVp-p
ps
ps
ns
-----27
550
tr / tf
660
Notes
Pathological
PRBS 223-1, BER=1E-12
Transition: low to high
Transition: high to low
AC coupled output
3, SMPTE 292M
3, SMPTE 344M
3, SMPTE 259M
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-1T1RG
3
***********************************************************************************************************************************************************************
Output LOS Voltage -- Low
Output LOS Voltage -- High
SCL, SDA
3.
V OL
V OH
V OH
V OL
0
2.5
2.5
0
0.5
Vcc+0.3
Vcc+0.3
0.5
V
V
V
V
IOL=-1.6mA, 1 TTL unit load
IOH=40µA, 1 TTL unit load
20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
Interpretation by Host
4
SCL
SDA
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-1T1RG
4
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Name
Vee
NC
NC
Vee
SCL
SDA
Vee
NC
NC
NC
Vee
RXRX+
Vee
Vcc RX
Vcc TX
Vee
TX+
TXTX_DIS
Function
Signal Ground
No Connection
No Connection
Signal Ground
Serial I2C Clock
Serial I2C Data
Signal Ground
No Connection
No Connection
No Connection
Signal Ground
Negative Differential Output
Positive Differential Output
Signal Ground
Power Supply
Power Supply
Signal Ground
Positive Transmitter Data In
Negative Transmitter Data In
Transmitter Disable
Notes
+3.3V±5%, Internal connected
AC coupled differential lines with 100 ohm
differential termination inside the module
Internal 4.7 kΩ pull-up. The bias current and
modulation current are turned off if TX1_DIS =
HIGH.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-1T1RG
5
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
1
2
3
4
VCC 3.3V
5
4.7K 4.7K
6
7
I2C CLK
8
I2C DATA
9
10
Vee
NC
TX_DIS
TX -
NC
TX +
Vee
Vee
SCL
Vcc_TX
SDA
Vcc_RX
Vee
Vee
NC
RX +
NC
RX -
NC
Vee
20
TX_DIS
TD -
19
100Ω Differential
18
Re-Clocker
TD +
17
16
100nF
10uF
VCC 3.3V
1uH
15
1uH
14
13
100nF
10uF 100nF
10uF
12
11
RD +
100Ω Differential
Re-Clocker
RD -
1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs
are internally biased and may not need external bias resistor.
PACKAGE DIAGRAM (Units in mm)
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0
Optoway
SPS-7110V-1T1RG
6
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
1.0
Subject
Initial datasheet
Release Date
2008/10/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2008 V1.0