IXYS LAA710S Dual single-pole, normally open optomos relay Datasheet

LAA710
Dual Single-Pole, Normally Open
OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Ratings
60
1
0.5
Units
VP
Arms / ADC

Description
LAA710 is a dual normally open (1-Form-A) Solid
State Relay that comprises two independently
controlled, optically coupled MOSFET switches. The
combination of super efficient MOSFET switches and
photovoltaic die provides 3750Vrms of input to output
isolation.
Features
The optically coupled outputs, which use the
patented OptoMOS architecture, are controlled by a
highly efficient GaAIAs infrared LED.
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Versions Available
Dual OptoMOS relay provides a more compact design
solution than discrete single-pole relays in a variety of
applications, and saves board space by incorporating
both switches in a single 8-pin package.
Approvals
Applications
• Telecommunications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Ordering Information
Part #
LAA710
LAA710S
Description
8-Pin DIP (50/Tube)
8-Pin Surface Mount (50/Tube)
LAA710STR
8-Pin Surface Mount (1,000/Reel)
Pin Configuration
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics of
Normally Open (Form A) Devices
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-LAA710-R03
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
LAA710
Absolute Maximum Ratings @ 25°C
Parameter
Ratings
Blocking Voltage
60
Reverse Input Voltage
5
Input Control Current
50
Peak (10ms)
1
1
Input Power Dissipation
150
800
Total Power Dissipation 2
Isolation Voltage, Input to Output
3750
Operational Temperature
-40 to +85
Storage Temperature
-40 to +125
1
2
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate linearly 1.33 mW / °C
Derate linearly 6.67 mW / °C
Electrical Characteristics @ 25°C
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
1
2
2
Conditions
Symbol
Min
Typ
Max
Units
t =10ms
IL=1A
VL=60VP
IL
ILPK
RON
ILEAK
-
-
1
±5
0.5
1
Arms / ADC
AP

VL=50V, f=1MHz
ton
toff
COUT
-
220
2.5
0.25
-
IL=150mA
IF=5mA
VR=5V
IF
VF
IR
0.4
0.9
-
0.7
1.2
-
10
1.4
10
mA
mA
V
A
-
CI/O
-
3
-
pF
IF=5mA, VL=10V
A
ms
pF
If both poles operate, the load current must be derated so as not to exceed the package power dissipation value.
Measurement taken within one (1) second of on-time.
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
LAA710
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
25
20
15
10
5
1.17
1.19
1.21
1.23
LED Forward Voltage (V)
15
10
5
0.5
Device Count (N)
15
10
5
0.7
0.9
1.1
1.3
Turn-On Time (ms)
1.25
1.75
2.25
2.75
3.25
LED Current (mA)
10
5
0.03
0.05
0.07
0.09
0.11
Turn-Off Time (ms)
0.13
Typical On-Resistance Distribution
(N=50, IF=10mA, IL=1ADC)
35
30
20
15
10
5
25
20
15
10
5
0
0
0
15
1.5
Typical IF for Switch Dropout
(N=50, IL=1ADC)
25
20
20
0
1.25
Typical IF for Switch Operation
(N=50, IL=1ADC)
25
Device Count (N)
20
0
0
Typical Turn-Off Time
(N=50, IF=10mA, IL=1ADC)
25
Device Count (N)
Device Count (N)
Device Count (N)
30
25
Typical Turn-On Time
(N=50, IF=10mA, IL=1ADC)
Device Count (N)
35
Typical LED Forward Voltage Drop
(N=50, IF=10mA)
1.25
3.75
1.75
2.25
2.75
3.25
LED Current (mA)
0.215
3.75
0.225 0.235 0.245 0.255
On-Resistance (:)
0.265
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
72
1.4
IF=50mA
IF=30mA
IF=20mA
IF=10mA
1.2
1.0
0.8
-40
-20
0
20
40
60
Temperature (ºC)
80
100
120
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Typical Turn-Off Time
vs. LED Forward Current
(IL=1ADC)
0.09
0.08
Turn-Off Time (ms)
Turn-On Time (ms)
LED Forward Voltage Drop (V)
1.6
82
Typical Turn-On Time
vs.LED Forward Current
(IL=1ADC)
Typical LED Forward Voltage Drop
vs. Temperature
1.8
74
76
78
80
Blocking Voltage (VP)
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
0
5
10
15 20 25 30 35 40
Forward Current (mA)
45
50
0
5
10 15 20 25 30 35 40
LED Forward Current (mA)
45
50
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
LAA710
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
Typical Turn-On Time
vs. Temperature
(IL=1ADC)
1.4
0.14
0.8
0.6
IF=20mA
0.4
0.10
0.08
0.06
0.04
0.2
0.02
0
0
-20
0
20
40
60
Temperature (ºC)
80
LED Current (mA)
-40
-20
0
0.25
0.20
0.15
0.10
0
-20
0
20
40
60
80
-40
100
20
40
60
Temperature (ºC)
80
Typical IF for Switch Dropout
vs. Temperature
(IL=1ADC)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
100
-40
Maximum Load Current
vs. Temperature
1000
800
600
400
200
0
-200
-400
-600
-800
-1000
-0.3
-20
0
20
40
60
Temperature (ºC)
80
100
0.006
79
0.005
1200
1000
IF=20mA
IF=10mA
IF=5mA
400
-40
-20
0
20
40
60
80
100
Leakage (PA)
0.007
80
Blocking Voltage (VP)
81
1400
78
77
76
75
73
-40
Temperature (ºC)
80
100
-0.2
0
-0.1
0.1
Load Voltage (V)
0.2
0.3
0.004
0.003
0.002
0.001
74
120
20
40
60
Temperature (ºC)
Typical Leakage vs. Temperature
Measured across Pins 5 & 6, 7 & 8
Typical Blocking Voltage
vs. Temperature
1600
600
0
Typical Load Current vs. Load Voltage
(IF=10mA)
1800
800
-20
Temperature (ºC)
Typical IF for Switch Operation
vs. Temperature
(IL=1ADC)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0.30
0.05
-40
100
0.35
Load Current (mA)
1.0
Typical On-Resistance vs. Temperature
(IF=10mA, IL=1ADC)
0.40
On-Resistance (:)
Turn-Off Time (ms)
Turn-On Time (ms)
IF=10mA
-40
Load Current (mA)
0.45
0.12
1.2
LED Current (mA)
Typical Turn-Off Time
vs. Temperature
(IF=10mA, IL=1ADC)
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
Energy Rating Curve
8
Load Current (A)
7
6
5
4
3
2
1
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
LAA710
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
LAA710 / LAA710S
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
LAA710 / LAA710S
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R03
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
LAA710
MECHANICAL DIMENSIONS
LAA710S
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
9.525 ± 0.254
(0.375 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
0.457 ± 0.076
(0.018 ± 0.003)
PCB Land Pattern
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
0.65
(0.0255)
4.445 ± 0.127
(0.175 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
LAA710STR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
K0 =4.90
(0.193)
Ao=10.30
(0.406)
K1 =4.20
(0.165)
Embossed Carrier
Embossment
6
W=16.00
(0.63)
Bo=10.30
(0.406)
P=12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
LAA710
MECHANICAL DIMENSIONS
LAA710
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
4.064 TYP
(0.160)
3.302 ± 0.051
(0.130 ± 0.002)
7.620 ± 0.127
(0.300 ± 0.005)
7.239 TYP.
(0.285)
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.127
(0.300 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-LAA710-R03
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/19/2012
Similar pages