ON NB100LVEP91MN 2.5 v/3.3 v any level positive input to −2.5 v/−3.3 v lvnecl output translator Datasheet

NB100LVEP91
2.5 V/3.3 V Any Level
Positive Input to
−2.5 V/−3.3 V LVNECL
Output Translator
http://onsemi.com
Description
The NB100LVEP91 is a triple any level positive input to NECL
output translator. The device accepts LVPECL, LVTTL, LVCMOS,
HSTL, CML or LVDS signals, and translates them to differential
LVNECL output signals (−2.5 V / −3.3 V).
To accomplish the level translation the LVEP91 requires three
power rails. The VCC pins should be connected to the positive power
supply, and the VEE pin should be connected to the negative power
supply. The GND pins are connected to the system ground plane. Both
VEE and VCC should be bypassed to ground via 0.01 mF capacitors.
Under open input conditions, the D input will be biased at VCC/2
and the D input will be pulled to GND. These conditions will force the
Q outputs to a low state, and Q outputs to a high state, which will
ensure stability.
The VBB pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to VBB as a switching reference voltage.
VBB may also rebias AC coupled inputs. When used, decouple VBB
and VCC via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, VBB should be left open.
Features
•
•
•
•
•
•
Maximum Input Clock Frequency > 2.0 GHz Typical
Maximum Input Data Rate > 2.0 Gb/s Typical
500 ps Typical Propagation Delay
Operating Range: VCC = 2.375 V to 3.8 V;
VEE = −2.375 V to −3.8 V; GND = 0 V
Q Output will Default LOW with Inputs Open or at GND
Pb−Free Packages are Available*
MARKING DIAGRAMS*
20
20
NB100LVEP91
AWLYYWWG
1
SO−20 WB
DW SUFFIX
CASE 751D
1
24
1
24
1
24 PIN QFN
MN SUFFIX
CASE 485L
A
WL, L
YY, Y
WW, W
G or G
N100
VP91
ALYWG
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
November, 2006 − Rev. 13
1
Publication Order Number:
NB100LVEP91/D
NB100LVEP91
Positive Level
Input
D0
R1
D0
R1
D1
R1
D1
R1
NECL Output
Q0
R2
Q0
Q1
R2
Q1
VCC
VBB
GND
D2
R1
D2
R1
Q2
R2
VEE
Q2
Figure 1. Logic Diagram
Table 1. PIN DESCRIPTION
Pin
SOIC
QFN
Name
I/O
Default
State
1, 20
3, 4, 12
VCC
−
−
Positive Supply Voltage. All VCC Pins must be Externally
Connected to Power Supply to Guarantee Proper Operation.
10
15, 16
VEE
−
−
Negative Supply Voltage. All VEE Pins must be Externally
Connected to Power Supply to Guarantee Proper Operation.
14, 17
19, 20, 23,
24
GND
−
−
Ground.
4, 7
7, 11
VBB
−
−
ECL Reference Voltage Output
2, 5, 8
5, 8, 13
D[0:2]
LVPECL, LVDS, LVTTL,
LVCMOS, CML, HSTL Input
Low
Noninverted Differential Inputs [0:2]. Internal 75 kW to VEE.
3, 6, 9
6, 9, 14
D[0:2]
LVPECL, LVDS,
LVTTL,LVCMOS, CML,
HSTL Input
High
Inverted Differential Inputs [0:2]. Internal 75 kW to VEE and
75 kW to VCC. When Inputs are Left Open They Default to
(VCC − VEE) / 2.
19,16,13
2, 18, 22
Q[0:2]
LVNECL Output
−
Noninverted Differential Outputs [0:2]. Typically Terminated
with 50 W to VTT = VCC − 2 V
18,15,12
1, 21, 17
Q[0:2]
LVNECL Output
−
Inverted Differential Outputs [0:2]. Typically Terminated with
50 W to VTT = VCC − 2 V
11
10
NC
−
−
No Connect. The NC Pin is NOT Electrically Connected to
the Die and may Safely be Connected to Any Voltage from
VEE to VCC.
N/A
−
EP
−
Description
Exposed Pad. (Note 1)
1. The thermally conductive exposed pad on the package bottom (see case drawing) must be attached to a heat−sinking conduit.
http://onsemi.com
2
NB100LVEP91
GND GND Q1
24
VCC Q0
Q0 GND Q1 Q1 GND Q2
Q2 NC
20
18
12
19
17
16
15
14
13
11
NB100LVEP91
1
2
3
VCC
D0
D0 VBB D1
4
5
6
7
8
D1 VBB D2
9
10
D2
VEE
23
22
Q1 GND GND
21
20
Exposed Pad
(EP)
19
Q0
1
18
Q2
Q0
2
17
Q2
VCC
3
16
VEE
VCC
4
15
VEE
D0
5
14
D2
D0
6
13
D2
NB100LVEP91
7
VBB
Figure 2. SOIC−20 Lead Pinout (Top View)
8
9
D1
D1
10
11
NC VBB
12
VCC
Figure 3. QFN−24 Lead Pinout (Top View)*
*All VCC, VEE and GND pins must be externally connected to a power supply and the underside exposed pad must be attached to an adequate
heat−sinking conduit to guarantee proper operation.
Table 2. ATTRIBUTES
Characteristics
Value
Internal Input Pulldown Resistor
(R1)
75 kW
Internal Input Pullup Resistor
(R2)
75 kW
ESD Protection
Human Body Model
Machine Model
Charged Device Model
Moisture Sensitivity (Note 2)
SO−20 WB
QFN−24
Flammability Rating
Oxygen Index: 28 to 34
Transistor Count
> 2 kV
> 150 V
> 2 kV
Pb Pkg
Pb−Free Pkg
Level 1
Level 1
Level 3
Level 1
UL 94 V−0 @ 0.125 in
446 Devices
Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
2. For additional information, see Application Note AND8003/D.
http://onsemi.com
3
NB100LVEP91
Table 3. MAXIMUM RATINGS
Symbol
Rating
Unit
VCC
Positive Power Supply
Parameter
GND = 0 V
Condition 1
Condition 2
3.8 to 0
V
VEE
Negative Power Supply
GND = 0 V
−3.8 to 0
V
VI
Positive Input Voltage
GND = 0 V
VI VCC
3.8 to 0
V
VOP
Operating Voltage
GND = 0 V
VCC − VEE
7.6 to 0
V
Iout
Output Current
Continuous
Surge
50
100
mA
mA
IBB
PECL VBB Sink/Source
± 0.5
mA
TA
Operating Temperature Range
−40 to +85
°C
Tstg
Storage Temperature Range
−65 to +150
°C
qJA
Thermal Resistance (Junction−to−Ambient)
JESD 51−3 (1S−Single Layer Test Board)
0 lfpm
500 lfpm
SOIC−20
SOIC−20
90
60
°C/W
°C/W
qJA
Thermal Resistance (Junction−to−Ambient)
JESD 51−6 (2S2P Multilayer Test Board) with Filled Thermal Vias
0 lfpm
500 lfpm
QFN−24
QFN−24
37
32
°C/W
°C/W
qJC
Thermal Resistance (Junction−to−Case)
Standard Board
SOIC−20
QFN−24
30 to 35
11
°C/W
°C/W
Tsol
Wave Solder
225
225
°C
Pb
Pb−Free
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 4. DC CHARACTERISTICS POSITIVE INPUTS VCC = 2.5 V, VEE = −2.375 to −3.8 V, GND = 0 V (Note 3)
−40°C
Symbol
Characteristic
25°C
85°C
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
10
14
20
10
14
20
10
14
20
mA
ICC
Positive Power Supply Current
VIH
Input HIGH Voltage (Single−Ended)
1335
VCC
1335
VCC
1335
VCC
mV
VIL
Input LOW Voltage (Single−Ended)
GND
875
GND
875
GND
875
mV
VIHCMR
Input HIGH Voltage Common Mode Range
(Differential Configuration) (Note 4)
0
2.5
0
2.5
0
2.5
V
IIH
Input HIGH Current (@ VIH)
150
mA
IIL
Input LOW Current (@ VIL)
150
D
D
0.5
−150
150
0.5
−150
0.5
−150
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Input parameters vary 1:1 with VCC. VCC can vary +1.3 V / −0.125 V.
4. VIHCMR min varies 1:1 with GND. VIHCMR max varies 1:1 with VCC.
http://onsemi.com
4
NB100LVEP91
Table 5. DC CHARACTERISTICS POSITIVE INPUT VCC = 3.3 V; VEE = −2.375 V to −3.8 V; GND = 0 V (Note 5)
−40°C
Symbol
Characteristic
25°C
85°C
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
10
16
24
10
16
24
10
16
24
mA
ICC
Positive Power Supply Current
VIH
Input HIGH Voltage (Single−Ended)
2135
VCC
2135
VCC
2135
VCC
mV
VIL
Input LOW Voltage (Single−Ended)
GND
1675
GND
1675
GND
1675
mV
VBB
PECL Output Voltage Reference
1775
1975
1775
1975
1775
1975
mV
VIHCMR
Input HIGH Voltage Common Mode Range
(Differential Configuration) (Note 6)
3.3
0
3.3
0
3.3
V
IIH
Input HIGH Current (@ VIH)
150
mA
IIL
Input LOW Current (@ VIL)
1875
0
1875
150
D
D
0.5
−150
1875
150
0.5
−150
0.5
−150
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input parameters vary 1:1 with VCC. VCC can vary +0.5 / −0.925 V.
6. VIHCMR min varies 1:1 with GND. VIHCMR max varies 1:1 with VCC.
Table 6. DC CHARACTERISTICS NECL OUTPUT VCC = 2.375 V to 3.8 V; VEE = −2.375 V to −3.8 V; GND = 0 V (Note 7)
−40°C
Symbol
Characteristic
Min
Typ
25°C
Max
Min
Typ
85°C
Max
Min
Typ
Max
Unit
IEE
Negative Power Supply Current
40
50
60
38
50
68
38
50
68
mA
VOH
Output HIGH Voltage (Note 8)
−1145
−1020
−895
−1145
−1020
−895
−1145
−1020
−895
mV
VOL
Output LOW Voltage (Note 8)
−1945
−1770
−1600
−1945
−1770
−1600
−1945
−1770
−1600
mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Output parameters vary 1:1 with GND.
8. All loading with 50 W resistor to GND − 2.0 V.
http://onsemi.com
5
NB100LVEP91
Table 7. AC CHARACTERISTICS VCC = 2.375 V to 3.8 V; VEE = −2.375 V to −3.8 V; GND = 0 V
−40°C
Symbol
Characteristic
Min
Typ
25°C
Max
85°C
Min
Typ
Max
600
525
250
800
750
550
375
300
500
450
600
675
Min
Typ
Max
550
400
150
800
750
500
400
300
550
500
650
750
ps
Unit
VOUTPP
Output Voltage Amplitude
(Figure 4)
(Note 9)
fin v 1.0 GHz
fin v 1.5 GHz
fin v 2.0 GHz
575
525
300
800
750
600
tPLH
tPHL0
Propagation Delay
D to Q
Differential
Single−Ended
375
300
500
450
600
650
tSKEW
Pulse Skew (Note 10)
Output−to−Output (Note 11)
Part−to−Part (Diff) (Note 11)
15
25
50
75
95
125
15
30
50
75
105
125
15
30
70
80
105
150
ps
tJITTER
RMS Random Clock Jitter (Note 12) fin = 2.0 GHz
Peak−to−Peak Data Dependant Jitter fin = 2.0 Gb/s
(Note 13)
0.5
20
2.0
0.5
20
2.0
0.5
20
2.0
ps
VINPP
Input Voltage Swing (Differential Configuration)
(Note 14)
200
800
1200
200
800
1200
200
800
1200
mV
tr, tf
Output Rise/Fall Times @ 50 MHz
(20% − 80%)
75
150
250
75
150
250
75
150
275
ps
Q, Q
mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
9. Measured using a 750 mV source, 50% duty cycle clock source. All loading with 50 W to GND − 2.0 V. Input edge rates 150 ps (20% − 80%).
10. Pulse Skew = |tPLH − tPHL|
11. Skews are valid across specified voltage range, part−to−part skew is for a given temperature.
12. RMS Jitter with 50% Duty Cycle Input Clock Signal.
13. Peak−to−Peak Jitter with input NRZ PRBS 231−1 at 2.0 Gb/s.
14. Input voltage swing is a single−ended measurement operating in differential mode. The device has a DC gain of ≈ 50.
10
9.0
750
8.0
AMP
7.0
650
6.0
550
5.0
4.0
450
3.0
2.0
350
1.0
RMS JITTER
250
RMS JITTER (ps)
OUTPUT VOLTAGE AMPLITUDE
(mV)
850
0.5
1.0
1.5
2.0
0
2.5
INPUT FREQUENCY (GHz)
Figure 4. Output Voltage Amplitude (VOUTPP) / RMS Jitter vs.
Input Frequency (fin) at Ambient Temperature (Typical)
D
VINPP = VIH(D) − VIL(D)
D
Q
VOUTPP = VOH(Q) − VOL(Q)
Q
tPHL
tPLH
Figure 5. AC Reference Measurement
http://onsemi.com
6
NB100LVEP91
Application Information
and the maximum input swing of 3.0 V. Within these
conditions, the input voltage can range from VCC to GND.
Examples interfaces are illustrated below in a 50 W
environment (Z = 50 W)
All NB100LVEP91 inputs can accept LVPECL, LVTTL,
LVCMOS, HSTL, CML, or LVDS signal levels. The
limitations for differential input signal (LVDS, HSTL,
LVPECL, or CML) are the minimum input swing of 150 mV
VCC
Z
VCC
LVEP91
LVDS
Driver
VCC
D
LVPECL
Driver
Z
Z
D
Z
D
50 W
GND
VTT = VCC − 2.0 V
VEE
GND
Figure 6. Standard LVPECL Interface
VCC
GND
VCC
VCC
50 W
Z
Z
D
HSTL
Driver
LVEP91
Z
VEE
Figure 7. Standard LVDS Interface
VCC
VCC
50 W
D
CML
Driver
LVEP91
Z
D
50 W
LVEP91
100 W
D
50 W
GND
VCC
D
50 W
GND
GND
VEE
GND
GND
VEE
GND
Figure 8. Standard HSTL Interface
VCC
Z
VCC
VCC
LVEP91
LVCMOS
Driver
D
LVTTL
Driver
1.5 V
Figure 9. Standard 50 W Load CML Interface
VCC
Z
D
D
LVEP91
Open
D
(externally generated
reference voltage)
GND
GND
VEE
GND
Figure 10. Standard LVTTL Interface
GND
VEE
Figure 11. Standard LVCMOS Interface
(D will default to VCC/2 when left open.
A reference voltage of VCC/2 should be applied
to D input, if D is interfaced to CMOS signals.)
http://onsemi.com
7
NB100LVEP91
ORDERING INFORMATION
Package
Shipping †
SO−20
38 Units / Rail
NB100LVEP91DWG
SO−20
(Pb−Free)
38 Units / Rail
NB100LVEP91DWR2
SO−20
1000 / Tape & Reel
SO−20
(Pb−Free)
1000 / Tape & Reel
QFN−24
92 Units / Rail
NB100LVEP91MNG
QFN−24
(Pb−Free)
92 Units / Rail
NB100LVEP91MNR2
QFN−24
3000 / Tape & Reel
QFN−24
(Pb−Free)
3000 / Tape & Reel
Device
NB100LVEP91DW
NB100LVEP91DWR2G
NB100LVEP91MN
NB100LVEP91MNR2G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Q
Zo = 50 W
D
Receiver
Device
Driver
Device
Q
D
Zo = 50 W
50 W
50 W
VTT
VTT = GND − 2.0 V
Figure 12. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D − Termination of ECL Logic Devices.)
Resource Reference of Application Notes
AN1405/D
− ECL Clock Distribution Techniques
AN1406/D
− Designing with PECL (ECL at +5.0 V)
AN1503/D
− ECLinPSt I/O SPiCE Modeling Kit
AN1504/D
− Metastability and the ECLinPS Family
AN1568/D
− Interfacing Between LVDS and ECL
AN1672/D
− The ECL Translator Guide
AND8001/D
− Odd Number Counters Design
AND8002/D
− Marking and Date Codes
AND8020/D
− Termination of ECL Logic Devices
AND8066/D
− Interfacing with ECLinPS
AND8090/D
− AC Characteristics of ECL Devices
http://onsemi.com
8
NB100LVEP91
PACKAGE DIMENSIONS
SO−20 WB
CASE 751D−05
ISSUE G
A
20
q
X 45 _
E
h
1
10
20X
B
B
0.25
M
T A
S
B
S
A
L
H
M
10X
0.25
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE PROTRUSION
SHALL BE 0.13 TOTAL IN EXCESS OF B
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
11
B
M
D
18X
e
A1
SEATING
PLANE
C
T
http://onsemi.com
9
DIM
A
A1
B
C
D
E
e
H
h
L
q
MILLIMETERS
MIN
MAX
2.35
2.65
0.10
0.25
0.35
0.49
0.23
0.32
12.65
12.95
7.40
7.60
1.27 BSC
10.05
10.55
0.25
0.75
0.50
0.90
0_
7_
NB100LVEP91
PACKAGE DIMENSIONS
QFN 24
MN SUFFIX
24 PIN QFN, 4x4
CASE 485L−01
ISSUE O
D
A
PIN 1
IDENTIFICATION
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.25 AND 0.30 MM
FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED PAD
AS WELL AS THE TERMINALS.
B
E
2X
0.15 C
DIM
A
A1
A2
A3
b
D
D2
E
E2
e
L
0.15 C
2X
A2
0.10 C
A
0.08 C
A3
A1
SEATING
PLANE
REF
D2
e
L
7
C
MILLIMETERS
MIN
MAX
0.80
1.00
0.00
0.05
0.60
0.80
0.20 REF
0.23
0.28
4.00 BSC
2.70
2.90
4.00 BSC
2.70
2.90
0.50 BSC
0.35
0.45
12
6
13
E2
24X
b
1
0.10 C A B
18
24
19
e
0.05 C
ECLinPS is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NB100LVEP91/D
Similar pages