GLENAIR M85049-49-51S61A Strain relief Datasheet

Strain
Reliefs
AS85049/51, MS3418, and M83723/15A
Strain Reliefs
Glenair Connector
Designator A
MIL-DTL-5015 Series 3400,
MIL-DTL-26482 Series 2,
AS81703 Series 3,
MIL-DTL-83723 Series I &
III, 40M39569, DEF 5326-3,
EN 2997, EN 3646,
ESC 10, ESC 11, LN 29504,
NFC93422 Series HE302,
PAN 6432-1, PAN 6432-2,
PATT 602
M85049/51 S 10 W
Basic Part No.
S = Self-Locking
-1- = Non-Self-Locking
Dash No.
MS3418-10 C
Basic Part No.
(Non-Self-Locking Only)
Dash No.
M83723/15A-10 A
Basic Part No.
(Non-Self-Locking Only)
Material and Finish Designator
A = Aluminum, Black Anodize
N = Aluminum, Electroless Nickel
W = Aluminum, 1,000 Hour Cadmium
Olive Drab Over Electroless
Nickel
SUPERCEDED SPEC.
Material and Finish Designator
A = Alum., 1,000 Hour Cadmium Olive
Drab Over Electroless Nickel
C = Aluminum, Cadmium Olive Drab
G = Aluminum, Black Anodize
N = Aluminum, Electroless Nickel
SUPERCEDED SPEC.
Finish Designator
A = Non-Conductive, Black Anodize
R = Conductive, Electroless Nickel
Dash No.
A Thread
F
Self Locking
Only
E
Self Locking
Only
G
Cable
Entry
© 2005 Glenair, Inc.
H
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
62-20
Strain
Reliefs
AS85049/51, MS3418, and M83723/15A
Strain Reliefs
TABLE I
Dash
No.
3*+
8
10
12
14
16
18
20
22
24
28+
32+
36+
40+
44+
48+
61*+
A Thread
Class 2B
.562 - 24 UNEF
.500 - 20 UNF
.625 - 24 UNEF
.750 - 20 UNEF
.875 - 20 UNEF
1.000 - 20 UNEF
1.062 - 18 UNEF
1.188 - 18 UNEF
1.313 - 18 UNEF
1.438 - 18 UNEF
1.750 - 18 UNS
2.000 - 18 UNS
2.250 - 16 UN
2.500 - 16 UN
2.750 - 16 UN
3.000 - 16 UN
1.500 - 18 UNEF
E Dia Max
Self-Locking
n/a
.885 (22.5)
1.010 (25.7)
1.135 (28.8)
1.260 (32.0)
1.385 (35.2)
1.510 (38.4)
1.635 (41.5)
1.760 (44.7)
1.885 (47.9)
2.135 (54.2)
2.395 (60.8)
2.635 (66.9)
2.885 (73.3)
3.135 (79.6)
3.385 (86.0)
n/a
F Max
Self-Locking
n/a
1.257 (31.9)
1.339 (34.0)
1.532 (38.9)
1.592 (40.4)
1.741 (44.2)
1.853 (47.1)
1.978 (50.2)
2.108 (53.5)
2.228 (56.6)
2.528 (64.2)
2.591 (65.8)
2.716 (69.0)
2.841 (72.2)
3.091 (78.5)
3.216 (81.7)
n/a
G
±.062 (1.6)
.777 (19.7)
.746 (18.9)
.805 (20.4)
.867 (22.0)
.930 (23.6)
.994 (25.2)
1.171 (29.7)
1.234 (31.2)
1.296 (32.9)
1.358 (34.5)
1.572 (39.9)
1.797 (45.6)
1.922 (48.8)
2.047 (52.0)
2.296 (58.3)
2.421 (61.5)
1.388 (35.3)
H
±.020
.732
.732
.812
.968
1.026
1.299
1.431
1.537
1.633
1.755
2.000
2.366
2.476
2.546
2.840
3.324
1.755
Cable Entry
(.5)
Max
Min
(18.6) .125 (3.2) .204 (5.2)
(18.6) .125 (3.2) .204 (5.2)
(20.6) .187 (4.7) .286 (7.3)
(24.6) .291 (7.4) .416 (10.6)
(26.1) .351 (8.9) .476 (12.1)
(33.0) .501 (12.7) .626 (15.9)
(36.3) .518 (13.2) .706 (17.9)
(39.0) .581 (14.8) .831 (21.1)
(41.5) .644 (16.4) .956 (24.3)
(44.6) .706 (17.9) 1.081 (27.5)
(50.8) .750 (19.1) 1.187 (30.1)
(60.1) .875 (22.2) 1.250 (31.8)
(62.9) .938 (23.8) 1.375 (34.9)
(64.7) .938 (23.8) 1.500 (38.1)
(72.1) 1.188 (30.2) 1.750 (44.5)
(84.4) 1.312 (33.3) 1.875 (47.6)
(44.6) .706 (17.9) 1.081 (27.5)
* Not Available in Self Locking
+
Not Available under M83723/15A
1. For complete dimensions see applicable Military Specification.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable Entry is defined as the accomodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
62-21
Similar pages