Kingbright AA4040RWC-A 4.0x4.0mm right angle surface mount led lamp Datasheet

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT
LED LAMP
PRELIMINARY SPEC
Part Number: AA4040RWC/A
WHITE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
The source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
Features
It is recommended to use a wrist band or anti-electrostatic
z SINGLE COLOR.
glove when handling the LEDs.
z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
All devices, equipment and machinery must be electrically
PROCESS.
grounded.
z AVAILABLE ON TAPE AND REEL.
z IDEAL FOR BACKLIGHTING.
z PACKAGE : 500PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z ELECTROSTATIC
z TYP.
DISCHARGE THRESHOLD (HBM):1000V.
COLOR TEMPERATURE:6500K
z COLOR
COORDINATES:X=0.31,Y=0.31 ACC. TO
CIE1931(WHITE).
z OPTICAL
z COLOR
z
Applications
z traffic signaling.
z backlighting (illuminated advertising , general lighting).
z interior and exterior automotive lighting.
z substitution of micro incandescent lamps.
z Reading camps.
z signal and symbol luminaire for orientation.
EFFICIENCY:14.4 lm/W(TYP.)
REPRODUCTION INDEX:80
RoHS COMPLIANT.
z marker lights (e.g. steps, exit ways, etc).
z decorative and entertainment lighting.
z indoor and outdoor commercial and residential
architectural lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 1 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
Selection Guide
Note2
Dice
Part No.
AA4040RWC/A
luminous Intensity
Iv(mcd) @ 20 mA
Lens Type
WHITE (InGaN) WATER CLEAR
Note3
Φv (mlm)
@ 20 mA
Viewing
Note1
Angle
Min.
Typ.
Typ.
2 θ 1/2
70
120
920
90°
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power dissipation
Pt
120
mW
Reverse Voltage
VR
5
V
Junction temperature
TJ
110
°C
Operating Temperature
Top
-40 To +85
°C
Storage Temperature
Tstg
-40 To +100
°C
IF
30
mA
IFM
100
mA
Rth JA
Rth JS
300
160
°C/W
°C/W
DC Forward Current
Peak Forward Current
Note4
Thermal resistance
Note5
Junction/ambient
Junction/solder point
Notes:
1 .θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data.
For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad),
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Chromaticity coordinate x acc.to CIE1931
IF=20mA [Typ.]
X
Chromaticity coordinate y acc.to CIE1931
IF=20mA [Typ.]
Y
Note1
Note1
Forward Voltage IF=20mA [Min.]
Forward Voltage IF=20mA [Typ.]
Forward Voltage
Unit
0.31
-
0.31
-
2.7
VF
Note2
IF=20mA [Max.]
Reverse Current (VR=5V)
Value
3.2
4.0
[Typ.]
0.01
IR
Reverse Current (VR=5V)
V
[Max.]
μA
10
Temperature coefficient of x
IF=20mA, -10 ° C≤ T≤100 ° C
[Typ.]
TC x
-0.1
10-3 / ° C
Temperature coefficient of y
IF=20mA, -10 ° C≤ T≤100 ° C
[Typ.]
TCy
-0.2
10-3 / ° C
Temperature coefficient of VF
IF=20mA, -10 ° C≤ T≤100 ° C
[Typ.]
TCV
-2.5
mV/ ° C
Notes:
1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates.
2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V.
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 2 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
Brightness codes
Note1
luminous Intensity
Iv(mcd) @ 20 mA
Φv (mlm)
@ 20 mA
Code.
Min.
Max.
Typ.
M
70
130
480
N
110
220
710
P
180
320
960
Q
280
420
1270
Note2
Notes:
1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the
typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.
White
AA4040RWC/A
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 3 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
AA4040RWC/A
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 4 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
AA4040RWC/A
White CIE
0.44
0.42
0.40
c1
0.38
0.36
b4
c0
0.34
b1
b3
0.32
b2
0.30
a1
0.28
a0
0.26
0.24
0.22
0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44
a0
a1
X
0.264
0.283
0.296
0.280
X
0.248
0.275
0.283
0.264
Y
0.267
0.305
0.276
0.248
Y
0.286
0.321
0.305
0.267
Reference CCT: 14000~9000k
Reference CCT: 14000~9000k
b1
b2
X
0.283
0.330
0.330
0.287
X
0.287
0.330
0.330
0.296
Y
0.305
0.360
0.339
0.295
Y
0.295
0.339
0.318
0.276
Reference CCT: 9000~5600k
Reference CCT: 9000~5600k
b3
b4
X
0.275
0.298
0.306
0.283
X
0.298
0.321
0.330
0.306
Y
0.321
0.350
0.332
0.305
Y
0.350
0.379
0.360
0.332
Reference CCT: 9000~7000k
Reference CCT: 7600~5600k
c0
c1
X
0.330
0.361
0.356
0.330
X
0.321
0.366
0.361
0.330
Y
0.360
0.385
0.351
0.318
Y
0.379
0.419
0.385
0.360
Reference CCT: 5600~4600k
Reference CCT: 6000~4600k
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 5 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
AA4040RWC/A
Recommended Soldering Pattern
(Units: mm ; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
Reel Dimension
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 6 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
PACKING & LABEL SPECIFICATIONS
AA4040RWC/A
SPEC NO: DSAG3661
REV NO: V.5
DATE: MAY/19/2007
PAGE: 7 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1201001934
Similar pages