MCC MMBZ5234BW 200 mw zener diode 2.4 to 39 volt Datasheet

MCC
TM
Micro Commercial Components
omponents
20736 Marilla Street Chatsworth
!"#
$ % !"#
MMBZ5221BW
THRU
MMBZ5259BW
Features
Halogen free available upon request by adding suffix "-HF"
Wide Voltage Range Available
Small Outline Package For Space Savings
High Temp Soldering: 260°C for 10 Seconds At Terminals
Surface Mount Package
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
•
•
•
•
•
•
•
200 mW
Zener Diode
2.4 to 39 Volts
Maximum Ratings
•
•
SOT-323
A
Operating Junction Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
D
Maximum Ratings @ 25oC Unless Otherwise Specified
10
mA
Zener Current
IF
Maximum Forward
VF
0.9
V
Voltage
Power Dissipation
Pd
200
mWatt
(No te s A)
Thermal Resistance
357
K/W
Juntion to Ambient Air RthJA
(Not e s A)
NOTES:
A. Mounted on FR4 PC board with our suggested solder pad layout .
.
B
F
C
E
H
G
J
K
DIMENSIONS
DIM
A
B
C
D
E
F
G
H
J
K
INCHES
MIN
MAX
.071
.087
.045
.053
.083
.096
.026 Nominal
.047
.055
.012
.016
.000
.004
.035
.039
.004
.010
.006
.016
MM
MIN
MAX
1.80
2.20
1.15
1.35
2.10
2.45
0.65Nominal
1.20
1.40
.30
.40
.000
.100
.90
1.00
.100
.250
.15
.40
NOTE
Suggested Solder
Pad Layout
0.70
0.90
*Pin Configuration - Top View
1.90
0.65
0.65
Revision: D
www.mccsemi.com
1 of 3
2013/09/24
MMBZ5221BW thru MMBZ5259BW
MCC
Micro Commercial Components
ELECTRICAL CHARACTERISTICS @25qC
MCC
PART
NUMBER
MMBZ5221BW
MMBZ5222BW
MMBZ5223BW
MMBZ5225BW
MMBZ5226BW
MMBZ5227BW
MMBZ5228BW
MMBZ5229BW
MMBZ5230BW
MMBZ5231BW
MMBZ5232BW
MMBZ5234BW
MMBZ5235BW
MMBZ5236BW
MMBZ5237BW
MMBZ5239BW
MMBZ5240BW
MMBZ5241BW
MMBZ5242BW
MMBZ5243BW
MMBZ5244BW
MMBZ5245BW
MMBZ5246BW
MMBZ5248BW
MMBZ5250BW
MMBZ5251BW
MMBZ5252BW
MMBZ5254BW
MMBZ5255BW
MMBZ5256BW
MMBZ5257BW
MMBZ5258BW
MMBZ5259BW
NOMINAL ZENER
VOLTAGE VZ @ IZT
MARKING
VOLTS
2.4
2.5
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
14
15
16
18
20
22
24
27
28
30
33
36
39
KC1/C1
KC2/C2
KC3/C3
KC5/C5
KG1/D1
KG2/D2
KG3/D3
KG4/D4
KG5/D5
KE1/E1
KE2/E2
KE4/E4
KE5/E5
KF1/F1
KF2/F2
KF4/F4
KF5/F5
KH1/H1
KH2/H2
KH3/H3
KH4/H4
KH5/H5
KJ1/J1
KJ3/J3
KJ5/J5
KK1/K1
KK2/K2
KK4/K4
KK5/K5
KM1/M1
KM2/M2
KM3/M3
KM4/M4
TEST CURRENT
IZT
mA
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
9.5
9.0
8.5
7.8
7.0
6.2
5.6
5.2
5.0
4.5
4.2
3.8
3.4
3.2
MAXIMUM ZENER IMPEDANCE
‘B’ SUFFIX ONLY
ZZT @ IZT
ZZK @IZK = 0.25mA
OHMS
OHMS
30
1200
30
1250
30
1300
29
1600
28
1600
24
1700
23
1900
22
2000
19
1900
17
1600
11
1600
7.0
1000
5.0
750
6.0
500
8.0
500
10
600
17
600
22
600
30
600
13
600
15
600
16
600
17
600
21
600
25
600
29
600
33
600
41
600
44
600
49
600
58
700
70
700
80
800
MAXIMUM REVERSE LEAKAGE
CURRENT
I R @ VR
VOLTS
PA
100
1.0
100
1.0
75
1.0
50
1.0
25
1.0
15
1.0
10
1.0
5.0
1.0
5.0
2.0
5.0
2.0
5.0
3.0
5.0
4.0
3.0
5.0
3.0
6.0
3.0
6.5
3.0
7.0
3.0
8.0
2.0
8.4
1.0
9.1
0.5
9.9
0.1
10
0.1
11
0.1
12
0.1
14
0.1
15
0.1
17
0.1
18
0.1
21
0.1
21
0.1
23
0.1
25
0.1
27
0.1
30
Note:
1. Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%.
2. Specials Available Include:
A. Nominal zener voltages between the voltages shown and tighter voltage tolerances.
B. Matched sets.
3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body.
4. Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener
current (IZT or IZK) is superimposed on IZT or IZK.
5. Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine
wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5.
Revision: D
www.mccsemi.com
2 of 3
TM
2013/09/24
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 3Kpcs/Reel
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: D
3 of 3
2013/09/24
Similar pages