TDK MLG1608B12NDT Smd inductors(coils) for high frequency(multilayer) Datasheet

(1/4)
SMD Inductors(Coils)
For High Frequency(Multilayer)
Conformity to RoHS Directive
MLG Series MLG1608
FEATURES
• Nominal inductance values are supported from 1 to 680nH.
• Provides high Q characteristics.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• It is a product conforming to RoHS directive.
PRODUCT IDENTIFICATION
MLG 1608 B 2N2 S T
(1)
(2) (3) (4) (5) (6)
(1) Series name
(2) Dimensions
1608
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
(3) Material code
(4) Inductance value
2N2
12N
R10
SHAPES AND DIMENSIONS
1.6× 0.8mm (L× W)
2.2nH
12nH
100nH
1.6±0.15
0.8±0.15
(5) Inductance tolerance
S
D
J
0.3±0.2
±0.3nH
±0.5nH
±5%
(6) Packaging style
0.8±0.15
T
Taping (reel)
SPECIFICATIONS
Weight: 4mg
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C [Unit of products]
RECOMMENDED PC BOARD PATTERN
PACKAGING STYLE AND QUANTITIES
2.0
Packaging style
Taping
0.8
0.8
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
Natural
cooling
230˚C
Quantity
4000 pieces/reel
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
006-01 / 20080406 / e521_mlg1608.fm
(2/4)
ELECTRICAL CHARACTERISTICS
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.5nH
±0.5nH
±0.5nH
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
8
8
8
8
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
10
10
10
10
10
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
Self-resonant
frequency
(GHz)
min.
typ.
10.0
20up
10.0
20up
10.0
19.6
10.0
16.6
8.0
10.8
7.0
8.8
6.5
8.8
6.0
7.9
5.0
6.8
5.0
6.8
4.5
5.7
4.5
5.6
3.5
4.5
3.0
3.8
2.8
3.6
2.6
3.3
2.3
3.0
2.0
2.7
1.8
2.3
1.6
2.0
1.4
1.8
1.2
1.8
1.1
1.6
1.0
1.4
0.80
1.2
0.65
0.8
0.55
0.7
0.50
0.6
0.45
0.6
0.35
0.5
0.35
0.47
0.30
0.43
0.25
0.39
0.25
0.36
0.20
0.31
DC resistance
(Ω)
max.
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.14
0.15
0.16
0.18
0.20
0.20
0.25
0.28
0.32
0.35
0.40
0.50
0.55
0.60
0.70
0.75
0.80
1.00
1.20
1.30
1.40
1.70
2.00
2.80
3.00
3.50
4.50
5.50
typ.
0.03
0.04
0.03
0.04
0.05
0.06
0.06
0.06
0.08
0.08
0.10
0.10
0.11
0.13
0.14
0.16
0.19
0.21
0.25
0.26
0.35
0.41
0.43
0.50
0.64
0.89
1.03
1.08
1.29
1.59
1.90
2.06
2.47
3.20
3.88
Rated current
(mA)max.
Part No.
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
500
500
500
400
400
400
300
300
300
300
250
250
200
200
100
100
100
70
70
MLG1608B1N0ST
MLG1608B1N2ST
MLG1608B1N5ST
MLG1608B1N8ST
MLG1608B2N2ST
MLG1608B2N7ST
MLG1608B3N3ST
MLG1608B3N9ST
MLG1608B4N7ST
MLG1608B5N6DT
MLG1608B6N8DT
MLG1608B8N2DT
MLG1608B10NJT
MLG1608B12NJT
MLG1608B15NJT
MLG1608B18NJT
MLG1608B22NJT
MLG1608B27NJT
MLG1608B33NJT
MLG1608B39NJT
MLG1608B47NJT
MLG1608B56NJT
MLG1608B68NJT
MLG1608B82NJT
MLG1608BR10JT
MLG1608SR12JT
MLG1608SR15JT
MLG1608SR18JT
MLG1608SR22JT
MLG1608SR27JT
MLG1608SR33JT
MLG1608SR39JT
MLG1608SR47JT
MLG1608SR56JT
MLG1608SR68JT
• Because it provides for a product of smaller inductance tolerance, please refer.
• Test equipment
Inductance Q : HP4291A+16193A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
• Rated current : Value obtained when current flows and temperature has risen to 20°C.
• All specifications are subject to change without notice.
006-01 / 20080406 / e521_mlg1608.fm
(3/4)
L, Q vs. FREQUENCY CHARACTERISTICS
Part No.
MLG1608B1N0ST
MLG1608B1N2ST
MLG1608B1N5ST
MLG1608B1N8ST
MLG1608B2N2ST
MLG1608B2N7ST
MLG1608B3N3ST
MLG1608B3N9ST
MLG1608B4N7ST
MLG1608B5N6DT
MLG1608B6N8DT
MLG1608B8N2DT
MLG1608B10NJT
MLG1608B12NJT
MLG1608B15NJT
MLG1608B18NJT
MLG1608B22NJT
MLG1608B27NJT
MLG1608B33NJT
MLG1608B39NJT
MLG1608B47NJT
MLG1608B56NJT
MLG1608B68NJT
MLG1608B82NJT
MLG1608BR10JT
MLG1608SR12JT
MLG1608SR15JT
MLG1608SR18JT
MLG1608SR22JT
MLG1608SR27JT
MLG1608SR33JT
MLG1608SR39JT
MLG1608SR47JT
MLG1608SR56JT
MLG1608SR68JT
Inductance(nH)typ.
500MHz
800MHz
1.0
1.0
1.2
1.1
1.5
1.5
1.8
1.8
2.2
2.1
2.6
2.6
3.2
3.2
3.8
3.8
4.6
4.6
5.4
5.5
6.6
6.7
8.0
8.1
9.8
10.0
11.8
12.1
14.8
15.4
17.8
18.5
21.9
22.9
27.1
28.8
33.4
36.0
40.2
45.0
49.1
56.0
59.6
71.1
74.0
92.8
91.1
120.6
118
182
188
283
455
771
1.8GHz
1.0
1.2
1.5
1.8
2.2
2.7
3.3
4.0
4.9
5.8
7.3
8.9
11.5
14.8
20.6
25.5
33.6
50.6
76.7
209.9
2.0GHz
1.0
1.2
1.5
1.8
2.2
2.7
3.3
4.0
5.0
5.9
7.5
9.3
12.1
16.0
23.4
29.3
40.2
68.5
125.1
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
2.4GHz
1.0
1.2
1.5
1.8
2.2
2.8
3.4
4.1
5.2
6.2
8.0
10
13.6
19.3
32.2
42.2
66.8
277.8
1.8GHz
77
57
78
77
88
79
76
79
76
69
67
67
63
59
49
47
43
34
27
11
3
2.0GHz
82
60
81
81
91
81
79
81
79
71
68
68
63
57
46
42
38
26
17
2.4GHz
95
68
93
95
107
94
91
93
88
79
74
71
61
51
34
30
23
7
50
1.0nH
270nH
3.3nH
40
100nH
10nH
33nH
30
10
10nH
Q
Inductance (nH)
800MHz
48
35
48
48
54
51
48
50
51
46
47
48
47
48
46
44
44
43
43
40
41
38
33
31
28
Q vs. FREQUENCY CHARACTERISTICS
1000
100
Q typ.
500MHz
39
28
37
38
44
40
38
40
41
37
38
39
38
39
38
36
36
37
37
36
38
37
34
33
35
23
19
14
9
3
3.3nH
20
100nH
33nH
1
1.0nH
10
270nH
0
10
100
1000
Frequency(MHz)
10000
0
10
100
1000
Frequency(MHz)
10000
• All specifications are subject to change without notice.
006-01 / 20080406 / e521_mlg1608.fm
(4/4)
PACKAGING STYLES
REEL DIMENSIONS
ø60±2.0
1.0
2.0±0.5
9.0±0.3
ø13±0.5
13.0±1.4
ø21±0.8
ø178±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
1.1max.
1.1±0.2
4.0±0.1
4.0±0.1
2.0±0.05
160min.
Taping
1.9±0.2
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
200min.
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
006-01 / 20080406 / e521_mlg1608.fm
Similar pages