MA-COM MAAM-007807-000SMB Broadband catv amplifier Datasheet

MAAM-007807
Broadband CATV Amplifier
50 - 1000 MHz
Rev. V2
Features






Functional Schematic
75 Ω Input / Output Match
3.8 dB Noise Figure
9 dB Gain
Lead-Free SOT-89 Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
GND
Description
M/A-COM’s MAAM-007807 CATV amplifier is a
GaAs MMIC which exhibits low distortion in a
miniature lead-free surface mount package. The
MAAM-007807 employs a monolithic single stage
design featuring a convenient 75 Ω input/output
impedance that minimizes the number of external
components required.
The MAAM-007807 provides low noise and high
linearity. It is ideally suited for set top boxes, home
gateways and other broadband internet based
appliances.
Pin 1
RFIN
GND
RFOUT
Pin Configuration
Pin No.
Pin Name
Description
1
RFIN
RF Input
2
GND
Ground
3
RFOUT
RF Output / Drain Supply
The MAAM-007807 is fabricated using M/A-COM’s
pHEMT process to realize low noise and low
distortion. The process features full passivation for
robust performance and reliability.
Absolute Maximum Ratings 3,4,5
Ordering Information 1,2
Parameter
Absolute Maximum
Part Number
Package
RF Input Power
8 dBm
MAAM-007807-TR1000
1000 piece reel
Voltage
8.0 volts
MAAM-007807-TR3000
3000 piece reel
Operating Temperature
MAAM-007807-000SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Junction Temperature
6
Storage Temperature
-40°C to +85°C
+150°C
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near these
survivability limits.
5. These operating conditions will ensure MTTF > 1 x 106 hours.
6. Junction Temperature (TJ) = TC + Өjc * (V * I)
Typical thermal resistance (Өjc) = 86° C/W.
a) For TC = 25°C,
TJ = 51°C @ 5 V, 60 mA
b) For TC = 85°C,
TJ = 109°C @ 5 V, 55 mA
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-007807
Broadband CATV Amplifier
50 - 1000 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = 5 Volts, Z0 = 75 Ω
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Gain
—
dB
8
9
10
Gain Flatness
—
dB
—
0.4
0.8
Noise Figure
—
dB
—
3.8
4.8
Input Return Loss
—
dB
—
18
—
Output Return Loss
—
dB
—
18
—
Output IP3
6 MHz Spacing, +4 dBm output per tone
dBm
—
35
—
Composite Triple Beat, CTB
132 channels, +15 dBmV / channel at the input.
dBc
—
-75
—
Composite Second Order, CSO
132 channels, +15 dBmV / channel at the input.
dBc
—
-65
—
P1dB
—
dBm
—
17
—
IDD
5 Volts
mA
50
60
70
Recommended Board Layout
Off-Chip Component Values
GND
C3
L1
L3 C1
C2
C5
C4
L2
R1
Component
Value
Package
C1 - C4
0.01 µF
0402
C5
0.8 pF
0402
L17
1 µH
1210
L2
3.3 nH
0402
L3
6.8 nH
0402
R1
300 Ω
0402
7. L1 supplied from EPCOS, part number B82422A1102K100
Handling Procedures
Please observe the following precautions to avoid
damage:
Schematic Including Off-Chip Components
Gallium Arsenide Integrated
to electrostatic discharge
damaged by electricity.
techniques should be used
devices.
Pin 1
RFIN
L2
L3
C1
C5
Static Sensitivity
C4
L1
R1
Circuits are sensitive
(ESD) and can be
Proper ESD control
when handling these
RFOUT
C2
VDD
C3
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-007807
Broadband CATV Amplifier
50 - 1000 MHz
Rev. V2
Typical Performance Curves
Gain vs. Frequency over Temperature
Gain vs. Frequency over Temperature to 3 GHz
12
15
+25°C
-40°C
+85°C
11
+25°C
-40°C
+85°C
10
10
9
5
8
0
7
6
-5
0
200
400
600
800
1000
0
500
Frequency (MHz)
1000
1500
2000
2500
3000
Frequency (MHz)
S11 vs. Frequency over Temperature
S22
-5
-5
+25°C
-40°C
+85°C
-10
-10
-15
-15
-20
-20
-25
-25
-30
0
200
400
+25°C
-40°C
+85°C
600
800
1000
Frequency (MHz)
-30
0
200
400
600
800
1000
Frequency (MHz)
Noise Figure @ +25° C
7
6
5
4
3
2
1
0
200
400
600
800
1000
Frequency (MHz)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-007807
Broadband CATV Amplifier
50 - 1000 MHz
Rev. V2
Lead-Free SOT-89 Plastic Package†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAM-007807
Broadband CATV Amplifier
50 - 1000 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
5
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
Similar pages