Maxim MAX6070AAUT25 Low-noise, high-precision series voltage reference Datasheet

MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
General Description
The MAX6070/MAX6071 offer a very low noise and
low-drift voltage reference in a small 6-pin SOT23 package. These devices provide a 1/f noise voltage of only
4.8µVP-P at an output voltage of 2.5V, with a temperature
drift of 6ppm/NC (max). The devices operate with an input
voltage from 2.8V to 5.5V. The MAX6070/MAX6071 consume 150FA of supply current and can sink and source
up to 10mA of load current. The MAX6070/MAX6071 provide an initial accuracy of 0.04%. The low-drift and lownoise specifications enable enhanced system accuracy,
making these devices ideal for high precision industrial
applications. The MAX6070 offers a noise filter option for
wideband applications.
The MAX6070/MAX6071 provide output voltages of
1.25V, 1.8V, 2.048V, 2.5V, 3.0V, 3.3V, 4.096V, and 5.0V.
The devices are available in a 6-pin SOT23 package and
specified over the extended industrial temperature range
of ‑40NC to +125NC.
Applications
High-Accuracy Industrial and Process Control
Benefits and Features
S High Q0.04% Initial Accuracy
S Low 1.5ppm/°C (typ), 6ppm/°C (max) Temperature
Drift
S Low 4.8µVP-P Noise (0.1Hz to 10Hz) at 2.5V
S Low 150µA Supply Current
S 10mA Source/Sink Load Current
S Noise Filter Option
S Low 200mV Dropout Voltage
S High 85dB Ripple Rejection
S Small 6-Pin SOT23 Package
S Voltage Output Options: 1.25V, 1.8V, 2.048V, 2.5V,
3.0V, 3.3V, 4.096V, and 5.0V
Ordering Information and Selector Guide appears at end of
data sheet.
For related parts and recommended products to use with this part,
refer to www.maximintegrated.com/MAX6070.related.
Precision Instrumentation
High-Resolution ADCs and DACs
Precision Current Sources
Typical Operating Circuits
MAX6070
IN
VIN
0.1µF
0.1µF
SHUTDOWN
CONTROL
BANDGAP
VOLTAGE
REFERENCE
OUTS
0.1µF
OUTF
FILTER
VOUT
OUTF
BANDGAP
VOLTAGE
REFERENCE
0.1µF
RL
EN
SHUTDOWN
CONTROL
GND
MAX6071
IN
VIN
OUTS
VOUT
0.1µF
RL
EN
GNDS
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
GNDF
19-6355; Rev 2; 3/13
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ABSOLUTE MAXIMUM RATINGS
OUTF to GNDS, GNDF, GND.......................-0.3V to the lower of
(VIN + 0.3V), +6V
OUTS to GNDS, GNDF, GND..................................-0.3V to +6V
IN to GNDS, GNDF, GND........................................-0.3V to +6V
EN to GNDS, GNDF, GND.......................................-0.3V to +6V
FILTER to GND.............................................-0.3V to the lower of
(VIN + 0.3V), +6V
GNDS to GNDF.....................................................-0.3V to +0.3V
Continuous Power Dissipation (TA = +70NC)
SOT23 (derate 4.3mW/NC above +70NC)................. 347.8mW
Operating Temperature Range......................... -40NC to +125NC
Junction Temperature......................................................+150NC
Storage Temperature Range............................. -65NC to +150NC
Soldering Temperature (reflow).......................................+260NC
Lead Temperature (soldering, 10s).................................+300NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
PACKAGE THERMAL CHARACTERISTICS (Note 1)
SOT23
Junction-to-Ambient Thermal Resistance (BJA)...........230°C/W
Junction-to-Case Thermal Resistance (BJC)....................76°C/W
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer
board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
ELECTRICAL CHARACTERISTICS—MAX607__AUT12 (VOUT = 1.250V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature
Drift (Note 3)
TCVOUT
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25NC
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
13
100
Over specified VIN
range
Line Regulation
Load Regulation
Output Current
MAX6070A/MAX6071A, TA = +25NC
TA = +25NC
TA = TMIN to TMAX
0mA < IOUT < 10mA, sink
70
150
0mA < IOUT < 10mA, source
100
150
IOUT
125
-10
+10
%
ppm/
NC
FV/V
FV/mA
mA
Sourcing to ground
25
25
Long-Term Stability
Sinking from VIN
1000 hours at TA = +25°C
35
ppm
Thermal Hysteresis
(Note 5)
85
ppm
1/f noise, 0.1Hz to 10Hz, COUT = 0.1FF
3.6
FVP-P
MAX6071 thermal noise, 10Hz to 10kHz,
COUT = 0.1FF
5.0
MAX6070 thermal noise, 10Hz to 10kHz,
COUT = 0.1FF, CFILTER = 0.1FF
2.5
Frequency = 60Hz
100
Short-Circuit Current
ISC
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
Ripple Rejection
Maxim Integrated
eOUT
FVRMS
dB
2
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT12 (VOUT = 1.250V) (continued)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
Turn-On Settling Time
Enable Settling Time
SYMBOL
tR
tEN
Capacitive-Load Stability Range
CONDITIONS
Settling to 0.01%,
COUT = 0.1FF
Settling to 0.01%,
COUT = 0.1FF
MIN
TYP
MAX
UNITS
MAX6070,
CFILTER = 0.1FF
6
ms
MAX6071
20
Fs
MAX6070,
CFILTER = 0.1FF
6
ms
MAX6071
60
IOUT P 10mA
0.1
Guaranteed by line regulation
2.7
Fs
10
FF
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
TA = +25NC
130
TA = TMIN to TMAX
200
260
FA
6
FA
+1
FA
ENABLE
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
-1
0.7 x VIN
0.3 x VIN
V
ELECTRICAL CHARACTERISTICS—MAX607__AUT18 (VOUT = 1.800V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature
Drift(Note 3)
TCVOUT
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25°C
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
35
150
Over specified VIN
range
Line Regulation
Load Regulation
Output Current
MAX6070A/MAX6071A, TA = +25°C
TA = +25°C
TA = TMIN to TMAX
200
0mA < IOUT < 10mA, sink
120
200
0mA < IOUT < 10mA, source
120
200
IOUT
-10
+10
%
ppm/°C
µV/V
µV/mA
mA
Sourcing to ground
25
Sinking from VIN
25
Long-Term Stability
1000 hours at TA = +25°C
35
ppm
Thermal Hysteresis
(Note 5)
85
ppm
Short-Circuit Current
Maxim Integrated
ISC
mA
3
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT18 (VOUT = 1.800V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
Ripple Rejection
Turn-On Settling Time
Enable Settling Time
tR
tEN
Capacitive-Load Stability
Range
1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF
6
MAX6071 thermal noise, 10Hz to 10kHz
COUT = 0.1µF
7
MAX6070 thermal noise, 10Hz to 10kHz
COUT = 0.1µF, CFILTER = 0.1µF
5
Frequency = 60Hz
89
dB
MAX6070
CFILTER = 0.1µF
6
ms
MAX6071
32
µs
MAX6070
CFILTER = 0.1µF
6
ms
MAX6071
60
µs
Settling to 0.01%
COUT = 0.1µF
Settling to 0.01%
COUT = 0.1µF
µVP-P
µVRMS
IOUT ≤10mA
0.1
10
µF
Guaranteed by line regulation
2.7
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
130
TA = +25°C
TA = TMIN to TMAX
200
260
µA
6
µA
1
µA
ENABLE
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
-1
0.7 x VIN
0.3 x VIN
V
ELECTRICAL CHARACTERISTICS—MAX607__AUT21 (VOUT = 2.048V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature
Drift (Note 3)
Line Regulation
Maxim Integrated
TCVOUT
MAX6070A/MAX6071A, TA = +25°C
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25°C
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
50
180
Over specified VIN
range
TA = +25°C
TA = TMIN to TMAX
225
%
ppm/°C
µV/V
4
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT21 (VOUT = 2.048V) (continued)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
Short-Circuit Current
MIN
0mA < IOUT < 10mA, sink
0mA < IOUT < 10mA, source
Load Regulation
Output Current
CONDITIONS
IOUT
ISC
Long-Term Stability
Thermal Hysteresis
TYP
MAX
135
225
135
225
-10
+10
UNITS
µV/mA
mA
Sourcing to ground
25
Sinking from VIN
25
1000 hours at TA = +25°C
(Note 5)
35
ppm
85
ppm
1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF
6.4
µVP-P
MAX6071 thermal noise, 10Hz to 10kHz
COUT = 0.1µF
8.6
MAX6070 thermal noise, 10Hz to 10kHz
COUT = 0.1µF, CFILTER = 0.1µF
6.3
Frequency = 60Hz
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
Ripple Rejection
Turn-On Settling Time
Enable Settling Time
tR
tEN
Capacitive-Load Stability
Range
Settling to 0.01%
COUT = 0.1µF
Settling to 0.01%
COUT = 0.1µF
µVRMS
86
dB
MAX6070
CFILTER = 0.1µF
6.2
ms
MAX6071
25
µs
MAX6070
CFILTER = 0.1µF
6.2
ms
MAX6071
65
µs
IOUT ≤10mA
0.1
10
µF
Guaranteed by line regulation
2.7
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
130
TA = +25°C
TA = TMIN to TMAX
200
260
µA
6
µA
+1
µA
ENABLE
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
Maxim Integrated
-1
0.7 x VIN
0.3 x VIN
V
5
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT25 (VOUT = 2.500V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature Drift
(Note 3)
TCVOUT
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25°C
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
60
145
Over specified
VIN range
Line Regulation
Load Regulation
Dropout Voltage
Output Current
MAX6070A/MAX6071A, TA = +25°C
TA = +25°C
TA = TMIN to TMAX
175
%
ppm/°C
µV/V
0mA < IOUT < 10mA, sink
80
140
0mA < IOUT < 10mA, source
75
125
IOUT = 10mA, TA = TMIN to TMAX
(Note 4)
110
230
mV
+10
mA
IOUT
-10
µV/mA
Sourcing to ground
25
Sinking from VIN
25
Long-Term Stability
1000 hours at TA = +25°C
40
ppm
Thermal Hysteresis
(Note 5)
85
ppm
1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF
4.8
µVP-P
MAX6071 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF
6
MAX6070 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF, CFILTER = 0.1µF
3
MAX6071 thermal noise, f = 1kHz,
COUT = 0.1µF
60
MAX6070 thermal noise, f = 1kHz,
COUT = 0.1µF, CFILTER = 0.1µF
30
Frequency = 60Hz
84
dB
MAX6070,
CFILTER = 0.1µF
10
ms
MAX6071
30
µs
MAX6070,
CFILTER = 0.1µF
10
ms
MAX6071
75
µs
Short-Circuit Current
ISC
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
Noise Spectral Density
Ripple Rejection
Turn-On Settling Time
Enable Settling Time
Capacitive-Load Stability Range
Maxim Integrated
tR
tEN
Settling to 0.01%,
COUT = 0.1µF
Settling to 0.01%,
COUT = 0.1µF
IOUT ≤ 10mA
µVRMS
nV/√Hz
0.1
10
µF
6
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT25 (VOUT = 2.500V) (continued)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
Guaranteed by line regulation
2.8
150
TA = +25°C
TA = TMIN to TMAX
235
300
0.6
µA
6
µA
+1
µA
ENABLE/SHUTDOWN
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
-1
0.7 x VIN
0.3 x VIN
V
ELECTRICAL CHARACTERISTICS—MAX607__AUT30 (VOUT = 3.000V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature Drift
(Note 3)
TCVOUT
Load Regulation
Dropout Voltage
Short-Circuit Current
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25°C
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
90
200
Over specified
VIN range
Line Regulation
Output Current
MAX6070A/MAX6071A, TA = +25°C
TA = +25°C
TA = TMIN to TMAX
0mA < IOUT < 10mA, sink
90
170
0mA < IOUT < 10mA, source
IOUT = 10mA, TA = TMIN to TMAX (Note 4)
90
150
IOUT
ISC
Long-Term Stability
Thermal Hysteresis
260
80
-10
%
ppm/°C
µV/V
µV/mA
150
mV
+10
mA
Sourcing to ground
25
Sinking from VIN
25
1000 hours at TA = +25°C
(Note 5)
40
ppm
85
ppm
1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF
4.6
µVP-P
MAX6071 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF
7.8
MAX6070 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF, CFILTER = 0.1µF
5.0
Frequency = 60Hz
80
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
Ripple Rejection
Maxim Integrated
eOUT
µVRMS
dB
7
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT30 (VOUT = 3.000V) (continued)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
Turn-On Settling Time
Enable Settling Time
SYMBOL
tR
tEN
Capacitive-Load Stability Range
CONDITIONS
Settling to 0.01%,
COUT = 0.1µF
Settling to 0.01%,
COUT = 0.1µF
MIN
TYP
MAX
UNITS
MAX6070,
CFILTER = 0.1µF
9.7
ms
MAX6071
40
µs
MAX6070,
CFILTER = 0.1µF
9.7
ms
MAX6071
75
µs
IOUT ≤ 10mA
0.1
Guaranteed by line regulation
3.2
10
µF
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
150
TA = +25°C
TA = TMIN to TMAX
235
300
0.6
µA
6
µA
+1
µA
ENABLE/SHUTDOWN
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
-1
0.7 x VIN
0.3 x VIN
V
ELECTRICAL CHARACTERISTICS—MAX607__ AUT33 (VOUT = 3.300V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature Drift
(Note 3)
TCVOUT
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25°C
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
90
220
Over specified
VIN range
Line Regulation
Load Regulation
Dropout Voltage
Output Current
MAX6070A/MAX6071A, TA = +25°C
TA = +25°C
ppm/°C
µV/V
TA = TMIN to TMAX
0mA < IOUT < 10mA, sink
100
190
0mA < IOUT < 10mA, source
100
165
IOUT = 10mA, TA = TMIN to TMAX
(Note 4)
65
150
mV
10
mA
IOUT
285
%
-10
µV/mA
Sourcing to ground
25
Sinking from VIN
25
Long-Term Stability
1000 hours at TA = +25°C
40
ppm
Thermal Hysteresis
(Note 5)
85
ppm
Short-Circuit Current
Maxim Integrated
ISC
mA
8
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__ AUT33 (VOUT = 3.300V) (continued)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1µF, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
Ripple Rejection
Turn-On Settling Time
Enable Settling Time
tR
tEN
Capacitive-Load Stability Range
1/f noise, 0.1Hz to 10Hz, COUT = 0.1µF
10
MAX6071 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF
9
MAX6070 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF, CFILTER = 0.1µF
6
Frequency = 60Hz
78
dB
MAX6070,
CFILTER = 0.1µF
10
ms
MAX6071
42
µs
MAX6070,
CFILTER = 0.1µF
10
ms
MAX6071
75
µs
Settling to 0.01%,
COUT = 0.1µF
Settling to 0.01%,
COUT = 0.1µF
µVP-P
µVRMS
IOUT ≤10mA
0.1
Guaranteed by line regulation
3.5
10
µF
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
160
TA = +25°C
TA = TMIN to TMAX
240
330
0.6
µA
6
µA
1
µA
ENABLE/SHUTDOWN
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
-1
0.7 x VIN
0.3 x VIN
V
ELECTRICAL CHARACTERISTICS—MAX607__AUT41 (VOUT = 4.096V)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature
Drift (Note 3)
Line Regulation
Maxim Integrated
TCVOUT
MAX6070A/MAX6071A, TA = +25NC
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25NC
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
100
250
Over specified VIN
range
TA = +25NC
TA = TMIN to TMAX
350
%
ppm/
NC
FV/V
9
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT41 (VOUT = 4.096V) (continued)
(VIN = +5.0V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
Load Regulation
Dropout Voltage
Output Current
CONDITIONS
TYP
MAX
0mA < IOUT < 10mA, sink
125
225
0mA < IOUT < 10mA, source
IOUT = 10mA, TA = TMIN to TMAX (Note 4)
135
225
75
150
mV
+10
mA
IOUT
MIN
-10
UNITS
FV/mA
Sourcing to ground
25
Sinking from VIN
25
Long-Term Stability
1000 hours at TA = +25NC
35
ppm
Thermal Hysteresis
(Note 5)
85
ppm
1/f noise, 0.1Hz to 10Hz, COUT = 0.1FF
9.6
FVP-P
MAX6071 thermal noise, 10Hz to 10kHz,
COUT = 0.1FF
12
MAX6070 thermal noise, 10Hz to 10kHz,
COUT = 0.1FF, CFILTER = 0.1FF
9
Frequency = 60Hz
Short-Circuit Current
ISC
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
Ripple Rejection
Turn-On Settling Time
Enable Settling Time
tR
tEN
Capacitive-Load Stability Range
Settling to 0.01%,
COUT = 0.1FF
Settling to 0.01%,
COUT = 0.1FF
FVRMS
80
dB
MAX6070,
CFILTER = 0.1FF
10
ms
MAX6071
40
Fs
MAX6070,
CFILTER = 0.1FF
10
ms
MAX6071
85
Fs
IOUT P 10mA
0.1
10
FF
Guaranteed by line regulation
4.3
5.5
V
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
150
TA = +25NC
TA = TMIN to TMAX
235
350
FA
6
FA
+1
FA
ENABLE
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
Maxim Integrated
-1
0.7 x VIN
0.3 x VIN
V
10
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT50 (VOUT = 5.000V)
(VIN = +5.5V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OUTPUT
Output Voltage Accuracy
Output Voltage Temperature
Drift (Note 3)
TCVOUT
-0.04
+0.04
MAX6070B/MAX6071B, TA = +25°C
-0.08
+0.08
MAX6070A/MAX6071A
1.5
6
MAX6070B/MAX6071B
2.0
8
Over specified VIN
range
Line Regulation
Load Regulation
Dropout Voltage
Output Current
MAX6070A/MAX6071A, TA = +25°C
200
TA = +25°C
400
ppm/°C
µV/V
TA = TMIN to TMAX
0mA < IOUT < 10mA, sink
0mA < IOUT < 10mA, source
160
275
160
275
IOUT = 10mA, TA = TMIN to TMAX (Note 6)
60
150
mV
+10
mA
IOUT
500
%
-10
µV/mA
Sourcing to ground
25
Sinking from VIN
25
Long-Term Stability
1000 hours at TA = +25°C
35
ppm
Thermal Hysteresis
(Note 5)
85
ppm
1/f noise, 0.1Hz to 10Hz, COUT = 0.1mF
9
µVP-P
MAX6071 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF
15
MAX6070 thermal noise, 10Hz to 10kHz,
COUT = 0.1µF, CFILTER = 0.1µF
12
Frequency = 60Hz
74
dB
MAX6070,
CFILTER = 0.1µF
10
ms
MAX6071
50
µs
MAX6070,
CFILTER = 0.1µF
10
ms
MAX6071
100
µs
Short-Circuit Current
ISC
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
Ripple Rejection
Turn-On Settling Time
Enable Settling Time
Capacitive-Load Stability Range
Maxim Integrated
tR
tEN
Settling to 0.01%,
COUT = 0.1µF
Settling to 0.01%,
COUT = 0.1µF
IOUT ≤ 10mA
µVRMS
0.1
10
µF
11
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
ELECTRICAL CHARACTERISTICS—MAX607__AUT50 (VOUT = 5.000V) (continued)
(VIN = +5.5V, IOUT = 0mA, COUT = 0.1FF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
5.5
V
160
250
INPUT
Supply Voltage
VIN
Quiescent Supply Current
IIN
Shutdown Supply Current
ISD
Guaranteed by line regulation
5.2
TA = +25°C
TA = TMIN to TMAX
330
µA
6
µA
+1
µA
ENABLE
Enable Input Current
IEN
Enable Logic-High
VIH
Enable Logic-Low
VIL
-1
0.7 x VIN
0.3 x VIN
V
Note 2: Limits are 100% production tested at TA = +25NC. Specifications where TA < +25NC or TA > +25NC are guaranteed by
design and characterization.
Note 3: Temperature coefficient is calculated using the “box method” which measures temperature drift as the maximum voltage
variation over a specified temperature range. The unit of measurement is ppm/°C.
Note 4: Dropout voltage is defined as the minimum differential voltage (VIN - VOUT) at which VOUT decreases by 0.2% from its
original value at VIN = 5.0V.
Note 5: Thermal hysteresis is defined as the change in +25NC output voltage before and after cycling the device from TMAX to TMIN.
Note 6: Dropout voltage is defined as the minimum differential voltage (VIN – VOUT) at which VOUT decreases by 0.2% from its
original value at VIN = 5.5V.
Maxim Integrated
12
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
1.2500
1.2497
4.0975
2.5005
4.0970
OUTPUT VOLTAGE (V)
1.2502
MAX6071_41 OUTPUT
VOLTAGE TEMPERATURE DRIFT
MAX6070 toc01b
MAX6070 toc01a
2.5010
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
1.2505
MAX6071_25 OUTPUT
VOLTAGE TEMPERATURE DRIFT
2.5000
MAX6070 toc01c
MAX6071_12 OUTPUT
VOLTAGE TEMPERATURE DRIFT
4.0965
4.0960
4.0955
2.4995
4.0950
1.2495
2.4990
0
25
50
75
100
125
-25
0
25
50
75
100
125
-50
25
50
75
100
MAX6070_25 OUTPUT
VOLTAGE LONG-TERM DRIFT
MAX6070_41 OUTPUT
VOLTAGE LONG-TERM DRIFT
15
FOUR TYPICAL UNITS
65
40
15
90
OUTPUT VOLTAGE CHANGE (ppm)
40
90
1000
1500
0
2000
65
40
15
500
1000
1500
0
2000
500
1000
1500
DURATION (HOURS)
DURATION (HOURS)
DURATION (HOURS)
MAX6071_25
LINE REGULATION
MAX6071_25
LOAD REGULATION
MAX6071_12
PSRR vs. FREQUENCY
2.4995
80
TA = +125°C
2.5005
2.5000
PSRR (dB)
2.5000
TA = 0°C
TA = -40°C
4.1
INPUT VOLTAGE (V)
4.8
5.5
20
2.4985
-10
60
40
2.4995
2.4990
3.4
100
TA = +85°C
2.5010
2000
MAX6070 toc05a
2.5015
OUTPUT VOLTAGE (V)
2.5005
120
MAX6070 toc04
2.5020
MAX6070 toc03
2.5010
Maxim Integrated
FOUR TYPICAL UNITS
-10
-10
500
125
MAX6070 toc02c
MAX6070_12 OUTPUT
VOLTAGE LONG-TERM DRIFT
MAX6070 toc2b
TEMPERATURE (°C)
65
2.4990
2.7
0
TEMPERATURE (°C)
FOUR TYPICAL UNITS
0
-25
TEMPERATURE (°C)
-10
SUPPLY CURRENT (mA)
4.0945
-50
OUTPUT VOLTAGE CHANGE (ppm)
OUTPUT VOLTAGE CHANGE (ppm)
90
-25
MAX6070 toc02a
-50
-5
0
5
OUTPUT CURRENT (mA)
10
0
10
100
1k
10k
100k
FREQUENCY (Hz)
13
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
80
80
70
60
60
PSRR (dB)
50
40
160
40
140
120
100
80
60
20
20
40
10
10
20
0
0
100
1k
10k
100k
0
10
100
1k
10k
3.4
2.7
100k
4.1
FREQUENCY (Hz)
INPUT VOLTAGE (V)
MAX6071_25
SUPPLY CURRENT vs. INPUT VOLTAGE
MAX6071_41
SUPPLY CURRENT vs. INPUT VOLTAGE
MAX6071_12
ROUT vs. FREQUENCY
140
120
100
80
60
0.7
0.6
140
120
100
80
40
20
20
3.4
4.1
4.8
5.5
1mA
SOURCING
1mA
SINKING
0.1
0
4.3
4.6
4.9
5.2
5.5
10
100
1k
100k
10k
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
FREQUENCY (Hz)
MAX6071_25
ROUT vs. FREQUENCY
MAX6071_41
ROUT vs. FREQUENCY
MAX6071_12
SUPPLY CURRENT vs. TEMPERATURE
1.2
MAX6070 toc07b
0.7
0.6
1.0
0.8
ROUT (I)
0.5
0.4
1mA
SOURCING
0.3
0.6
0.4
1mA
SOURCING
0.2
0.1
1mA
SINKING
0
100
1k
FREQUENCY (Hz)
Maxim Integrated
10k
100k
200
0.2
180
VIN = 5.5V
160
SUPPLY CURRENT (µA)
0.8
10
0.4
0.2
0
2.7
0.5
0.3
60
40
0
0.8
MAX6070 toc07a
160
SUPPLY CURRENT (µA)
160
180
ROUT (I)
180
MAX6070 toc06c
200
MAX6070 toc06b
200
5.5
4.8
FREQUENCY (Hz)
MAX6070 toc08a
10
SUPPLY CURRENT (µA)
50
30
30
180
MAX6070 toc07c
PSRR (dB)
70
200
SUPPLY CURRENT (µA)
90
MAX6070 toc05c
90
MAX6070 toc05b
100
ROUT (I)
MAX6071_12
SUPPLY CURRENT vs. INPUT VOLTAGE
MAX6071_41
PSRR vs. FREQUENCY
MAX6070 toc06a
MAX6071_25
PSRR vs. FREQUENCY
140
120
VIN = 2.7V
100
80
60
40
1mA
SINKING
20
0
0
10
100
1k
FREQUENCY (Hz)
10k
100k
-50
-25
0
25
50
75
100
125
TEMPERATURE (°C)
14
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
SUPPLY CURRENT (µA)
150
VIN = 2.8V
100
VOUT = 1.25V
2µV/div
150
VIN = 4.3V
100
50
50
0
-25
0
25
50
75
100
-50
125
-25
0
25
50
75
100
TEMPERATURE (°C)
TEMPERATURE (°C)
MAX6070_25 OUTPUT NOISE
(0.1Hz TO 10Hz)
MAX6070_41 OUTPUT NOISE
(0.1Hz TO 10Hz)
MAX6070 toc09b
1s/div
125
MAX6070_12
OUTPUT NOISE DENSITY vs. FREQUENCY
MAX6070 toc09c
VOUT = 4.096V
1k
OUTPUT NOISE DENSITY (nV/√Hz)
VOUT = 2.50V
4µV/div
2µV/div
MAX6070 toc10a
0
-50
VIN = 5.5V
200
MAX6070 toc09a
MAX6070 toc08c
VIN = 5.5V
200
SUPPLY CURRENT (µA)
250
MAX6070 toc08b
250
MAX6070_12 OUTPUT NOISE
(0.1Hz TO 10Hz)
MAX6071_41
SUPPLY CURRENT vs. TEMPERATURE
MAX6071_25
SUPPLY CURRENT vs. TEMPERATURE
100
CF = 0µF
CF = 0.1µF
10
1
10
1s/div
1s/div
100
1k
10k
FREQUENCY (Hz)
100
CF = 0µF
CF = 0.1µF
10
1
CF = 0µF
100
CF = 0.1µF
10
1
10
100
1k
FREQUENCY (Hz)
Maxim Integrated
1k
OUTPUT NOISE DENSITY (nV/√Hz)
MAX6070 toc10b
OUTPUT NOISE DENSITY (nV/√Hz)
1k
MAX6070_41
OUTPUT NOISE DENSITY vs. FREQUENCY
MAX6070 toc10c
MAX6070_25
OUTPUT NOISE DENSITY vs. FREQUENCY
10k
10
100
1k
10k
FREQUENCY (Hz)
15
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
MAX6070_12 TURN-ON TRANSIENT
(CFILTER = 0µF)
MAX6070_25 TURN-ON TRANSIENT
(CFILTER = 0µF)
MAX6070 toc11a
VIN = 0V
MAX6070 toc11b
VIN = 5V
0.01% SETTLING
TIME = 21µs
VIN = 5V
VOUT = 1.25V
VIN
0V
0.01% SETTLING
TIME = 33µs
VOUT = 2.5V
VOUT
0V
VOUT = 0V
10µs/div
10µs/div
MAX6070_41 TURN-ON TRANSIENT
(CFILTER = 0µF)
MAX6070_12 TURN-ON TRANSIENT
(CFILTER = 0.1µF)
MAX6070 toc11c
VIN = 5V
VIN = 0V
0.01% SETTLING
TIME = 41µs
MAX6070 toc12a
VIN = 0V
0.01% SETTLING VIN = 5V
TIME = 6.1ms
VOUT = 1.25V
VOUT = 4.096V
VOUT = 0V
VOUT = 0V
2ms/div
10µs/div
MAX6070_25 TURN-ON TRANSIENT
(CFILTER = 0.1µF)
MAX6070_41 TURN-ON TRANSIENT
(CFILTER = 0.1µF)
MAX6070 toc12b
VIN = 5V
VIN
0V
MAX6070 toc12c
VIN = 0V
0.01% SETTLING TIME = 9.6ms
VIN = 5V
0.01% SETTLING
TIME = 10ms
VOUT = 2.5V
VOUT = 4.096V
VOUT
0V
VOUT = 0V
4ms/div
Maxim Integrated
4ms/div
16
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
MAX6071_12 ±10mA LOAD TRANSIENT
(COUT = 0.1µF)
MAX6071_25 ±10mA LOAD TRANSIENT
(COUT = 0.1µF)
MAX6070 toc13a
MAX6070 toc13b
VOUT
VOUT = 1.25V
SINK 10mA
SOURCE
10mA
VOUT = 2.5V
SINK 10mA
IOUT
SOURCE
10mA
VOUT
IOUT
VOUT = 0V
VOUT = 0V
10µs/div
10µs/div
MAX6071_41 ±10mA LOAD TRANSIENT
(COUT = 0.1µF)
MAX6070_12 LINE TRANSIENT
(COUT = 0.1µF)
MAX6070 toc14a
MAX6070 toc13c
VIN = 4.35V
VOUT = 4.096V
SINK 10mA
SOURCE
10mA
VOUT
VIN
200mV/div
VIN = 3.85V
VOUT
20mV/div
IOUT
VOUT = 0V
10µs/div
20µs/div
MAX6070_25 LINE TRANSIENT
(COUT = 0.1µF)
MAX6070_41 LINE TRANSIENT
(COUT = 0.1µF)
MAX6070 toc14c
MAX6070 toc14b
VIN = 5.25V
VIN = 4.35V
VIN
200mV/div
VIN
200mV/div VIN = 4.75V
VIN = 3.85V
VOUT
20mV/div
VOUT
200mV/div
20µs/div
Maxim Integrated
20µs/div
17
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
MAX6070_12 ENABLE TRANSIENT
(CFILTER = 0µF)
MAX6070_12 ENABLE TRANSIENT
(CFILTER = 0.1µF)
MAX6070 toc15
VIN = 0V
0.01% SETTLING
TIME = 63µs
VIN = 5V
VOUT = 1.25V
MAX6070 toc16
VIN = 0V
VIN = 5V
0.01% SETTLING
TIME = 6.1ms
VOUT = 1.25V
VOUT = 0V
VOUT = 0V
10µs/div
2ms/div
MAX6070_25 ENABLE TRANSIENT
(CFILTER = 0µF)
MAX6070_25 ENABLE TRANSIENT
(CFILTER = 0.1µF)
MAX6070 toc17
VIN = 0V
MAX6070 toc18
VIN = 5V
VIN = 5V
0.01% SETTLING TIME = 75µs
VOUT = 2.5V
VOUT = 0V
VIN = 0V
4ms/div
MAX6070_41 ENABLE TRANSIENT
(CFILTER = 0µF)
MAX6070_41 ENABLE TRANSIENT
(CFILTER = 0.1µF)
MAX6070 toc19
VIN = 5V
0.01% SETTLING TIME = 85µs
MAX6070 toc20
VIN = 0V
VOUT = 4.096V
0.01% SETTLING
TIME = 10ms
VIN = 5V
VOUT = 4.096V
VOUT = 0V
VOUT = 0V
10µs/div
Maxim Integrated
VOUT = 2.5V
VOUT = 0V
10µs/div
VIN = 0V
0.01% SETTLING
TIME = 9.6ms
4ms/div
18
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Pin Configurations
TOP VIEW
+
FILTER
1
GND
2
EN
3
+
MAX6070
6
OUTF
GNDF
1
5
OUTS
GNDS
2
4
IN
EN
3
SOT23
MAX6071
6
OUTF
5
OUTS
4
IN
SOT23
Pin Description
PIN
NAME
FUNCTION
MAX6070
MAX6071
1
—
FILTER
Filter Input. Connect a 0.1µF capacitor from FILTER to ground to provide high-frequency
bypass. Leave unconnected, if not used.
—
1
GNDF
Ground Force
2
—
GND
Ground
-
2
GNDS
3
3
EN
Enable. Drive high to enable the device. Drive low to disable the device.
4
4
IN
Supply Input
5
5
OUTS
Voltage Reference Sense Output
6
6
OUTF
Voltage Reference Force Output. Short OUTF to OUTS as close as possible to the load.
Bypass OUTF with a capacitor (0.1µF to 10µF) to GND.
Maxim Integrated
Ground Sense. Connect to ground connection at the load.
19
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Detailed Description
Wideband Noise Reduction (FILTER)
To improve wideband noise and transient power-supply
noise with the MAX6070, connect a 0.1FF capacitor from
FILTER to GND (see the Typical Operating Characteristics).
Larger values do not appreciably improve noise reduction.
A 0.1FF capacitor reduces the spectral noise density at
1kHz from 60nV/√Hz to 30nV/√Hz for the 2.5V output.
Noise at the input pin can affect output noise, but can
be reduced by connecting an optional bypass capacitor
between IN and GND as shown in Figure 1.
accuracy is needed (see Figure 1). The MAX6071 features the same type of Kelvin connection to cancel drops
in the ground return line. Connect the load to ground and
connect GNDS to ground as close as possible to the load
ground connection (see Figure 2).
Shutdown
The MAX6070/MAX6071 feature an active-high enable
pin (EN). Pulling EN low disables the output with a resistive load to ground and forces the quiescent current to
less than 1µA. The value of the load is typically 200kω.
Pulling EN high enables normal operation.
Applications Information
Output Bypassing
The MAX6070/MAX6071 require an output capacitor
between 0.1FF and 10FF. Place the output capacitor
as close to OUTF as possible. For applications driving
switching capacitive loads or rapidly changing load currents, use a 0.1µF capacitor in parallel with a larger load
capacitor to reduce equivalent series resistance (ESR).
Larger capacitor values and lower ESR reduce transients
on the reference output.
Supply Current
The MAX6070/MAX6071 draw 150FA of current and are
virtually independent of the supply voltage, with only a
1.6FA / V variation with supply voltage.
Thermal Hysteresis
Thermal hysteresis is the change of output voltage at
TA = +25NC before and after the device is cycled over its
entire operating temperature range. The typical thermal
hysteresis value is 85ppm.
Wideband Noise Reduction
Figure 1 shows a typical noise reduction filter application
circuit. Note that the use of the wideband noise filter will
increase turn-on time.
High-Resolution DAC and
Reference from a Single Supply
Figure 2 shows a typical circuit providing the reference
for a high-resolution, 16-bit MAX541 DAC.
Precision Current Source
Figure 3 shows a typical circuit providing a precision current source. The OUTF output provides the bias current
for the bipolar transistor. OUTS and GNDS sense the voltage across the resistor and adjust the current sourced by
OUTF accordingly.
5V SUPPLY
Turn-On Time
These devices typically turn on and settle to within 0.01%
of their final value in 30Fs. A noise reduction capacitor of
0.1FF increases the turn-on time of the MAX6070 to 10ms.
EN
IN
Output Force and Sense
The MAX6070/MAX6071 provide independent connections for the force output (OUTF) supplying current to the
load and the circuit input regulating the load voltage via
the output sense pin (OUTS). This configuration allows for
the cancellation of the voltage drop on the lines connecting the MAX6070/MAX6071 and the load. When using
the Kelvin connection made possible by the independent
force and sense outputs, connect OUTF to the load and
connect OUTS to OUTF at the point where the voltage
Maxim Integrated
LOAD
OUTF
OUTS
0.1µF
FILTER
0.1µF
MAX6070
0.1µF
GND
Figure 1. Reference Output Kelvin Connection
20
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
5V SUPPLY
5V SUPPLY
IN
ISOURCE
0.1µF
IN
OUTF
EN
MAX6071
0.1µF
REF
VDD
MAX541
DAC
OUTS
MAX6071
OUTF
LOAD
OUT
OUTS
GND
GNDS
0.1µF
GND
GND
GNDS
R
VOUT(NOMINAL) / R = ISOURCE
Figure 2. Reference Ground Kelvin Connection
Figure 3. Precision Current Source
Selector Guide
PART
FILTER
VOUT (V)
ACCURACY (%)
TOP MARK
MAX6070AAUT12+T
Yes
1.25
0.04
+ACPF
MAX6070AAUT18+T
Yes
1.8
0.04
+ACPH
MAX6070AAUT21+T
Yes
2.048
0.04
+ACPJ
MAX6070AAUT25+T
Yes
2.5
0.04
+ACPL
MAX6070AAUT30+T
Yes
3.0
0.04
+ACPN
MAX6070AAUT33+T
Yes
3.3
0.04
+ACPP
MAX6070AAUT41+T
Yes
4.096
0.04
+ACPR
MAX6070AAUT50+T
Yes
5.0
0.04
+ACPV
MAX6070BAUT12+T
Yes
1.25
0.08
+ACPG
MAX6070BAUT18+T
Yes
1.8
0.08
+ACPI
MAX6070BAUT21+T
Yes
2.048
0.08
+ACPK
MAX6070BAUT25+T
Yes
2.5
0.08
+ACPM
MAX6070BAUT30+T
Yes
3.0
0.08
+ACPO
MAX6070BAUT33+T
Yes
3.3
0.08
+ACPQ
MAX6070BAUT41+T
Yes
4.096
0.08
+ACPS
MAX6070BAUT50+T
Yes
5.0
0.08
+ACPW
MAX6071AAUT12+T
No
1.25
0.04
+ACPX
MAX6071AAUT18+T
No
1.8
0.04
+ACPZ
MAX6071AAUT21+T
No
2.048
0.04
+ACQB
MAX6071AAUT25+T
No
2.5
0.04
+ACQD
MAX6071AAUT30+T
No
3.0
0.04
+ACQF
Maxim Integrated
21
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Selector Guide (continued)
PART
FILTER
VOUT (V)
ACCURACY (%)
TOP MARK
MAX6071AAUT33+T
MAX6071AAUT41+T
No
3.3
0.04
+ACQH
No
4.096
0.04
+ACQJ
MAX6071AAUT50+T
MAX6071BAUT12+T
No
5.0
0.04
+ACQN
No
1.25
0.08
+ACPY
MAX6071BAUT18+T
No
1.8
0.08
+ACQA
MAX6071BAUT21+T
No
2.048
0.08
+ACQC
MAX6071BAUT25+T
No
2.5
0.08
+ACQE
MAX6071BAUT30+T
No
3.0
0.08
+ACQG
MAX6071BAUT33+T
No
3.3
0.08
+ACQI
MAX6071BAUT41+T
No
4.096
0.08
+ACQK
MAX6071BAUT50+T
No
5.0
0.08
+ACQO
Package Information
Ordering Information
TEMP RANGE
PINPACKAGE
MAX6070_AUT_ _+T
-40NC to +125NC
6 SOT23
MAX6071_AUT_ _+T
-40NC to +125NC
6 SOT23
PART
+Denotes a lead(Pb)-free/RoHS-compliant package.
Note: The MAX6070/MAX6071 are available in A or B grade
with various output voltages. Choose the desired grade and
output voltage from the Selector Guide and insert the suffix in
the blank above to complete the part number.
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
DOCUMENT
NO.
LAND
PATTERN NO.
SOT23-6
U6+5
21-0058
90-0175
Chip Information
PROCESS: BIPOLAR
Maxim Integrated
22
MAX6070/MAX6071
Low-Noise, High-Precision Series
Voltage References
Revision History
REVISION
NUMBER
REVISION
DATE
0
10/12
Initial release
1
1/13
Added 2.048V, 3.0V, and 5.0V options to data sheet. Revised General Description,
Benefits and Features, Absolute Maximum Ratings, Electrical Characteristics, and
Selector Guide.
1–9, 17, 18
2
3/13
Added 1.8V and 3.3V options to data sheet. Revised General Description, Benefits
and Features, Electrical Characteristics, and Selector Guide.
1, 2–12, 21, 22
DESCRIPTION
PAGES
CHANGED
—
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent
licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and
max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
©
2013 Maxim Integrated Products, Inc.
23
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Maxim Integrated:
MAX6071AAUT41+T MAX6071BAUT25+T MAX6070BAUT12+T MAX6070AAUT25+T MAX6071BAUT12+T
MAX6070AAUT12+T MAX6070BAUT21+T MAX6071BAUT21+T MAX6071AAUT12+T MAX6070BAUT30+T
MAX6070BAUT41+T MAX6070AAUT41+T MAX6070AAUT21+T MAX6071AAUT21+T MAX6071AAUT50+T
MAX6071AAUT30+T MAX6071BAUT30+T MAX6070AAUT30+T MAX6071BAUT41+T MAX6071AAUT25+T
MAX6070BAUT50+T MAX6071BAUT50+T MAX6070AAUT50+T MAX6070BAUT25+T
Similar pages