Series 804 Series 804 “Mighty Mouse” Push-Pull Quick-Disconnect Series 804 Receptacles With PCB or Solder Cup Contacts A Series 804 Receptacles feature factory-installed non-removable contacts. Connectors are backfilled with rigid epoxy for a watertight seal. B Solder Cup Contacts accept up to #22 AWG stranded wire. Series 804 QDC Receptacles are available in two jam nut shell styles. Style 00 for front panel mounting; and Style 07 for rear panel mounting. C D PCB Contacts feature .020" (0.5mm) diameter gold-plated tails for solder termination to rigid or flexible circuits. Series 804 Printed Circuit Board Receptacle E HOW TO ORDER SERIES 801 PRINTED CIRCUIT BOARD RECEPTACLES Sample Part Number F G H 804-005 -07 NF 9-4 E Series Shell Style Shell Material / Finish Shell Size- Insert Arrangement Contact Type 804-005 C Receptacle with Solder Cup Contacts or PC Tails Aluminum / Black Anodize M Aluminum / Electroless Nickel -00 NF Jam Nut, Front Panel Aluminum / Cadmium with Olive Drab Chromate ZN J Aluminum / Zinc-Nickel with Olive Drab Chromate ZNU K -07 Jam Nut, Rear Panel Aluminum / Zinc-Nickel with Black Chromate Z1 Stainless Steel 5-3 6-1 6-4 6-7 7-1 7-10 8-13 9-4 9-19 10-26 12-2 12-37 14-55 15-85 3 #23 1 #16 4 #23 7 #23 1 #12 10 #23 13 #23 4 #16 19 #23 26 #23 2 #12 37 #23 55 #23 85 #23 Shell Key Position P Omit Pin, PC Tail for Single Master Key S A Socket, PC Tail Pos. A (Normal) E B Pin, Solder Cup Pos. B C Pos. C F D Socket, Solder Cup Pos. D L M © 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-10 Rev. 05-APR-2007 E-Mail: [email protected] Series 804 Series 804 “Mighty Mouse” Push‑Pull Quick-Disconnect Series 804 PCB/Solder Receptacles – Rear Panel Jam Nut .940 (23.88) .275 (Ref) KEYWAY A .667/.657 (16.94/16.69) B øG C FLAT øE øF øb øA C .025 (0.64) MEdIUM RAISEd dIAMONd KNURL .125 (3.18) MAX PANEL THICKNESS d THREAd Rear Panel Jam Nut 804-005-07 D E dimensions Shell Size 5 6 7 8 9 10 12 14 15 In. ØA mm. .730 .730 .910 .955 1.000 1.085 1.190 1.325 1.375 In. ØB mm. 18.54 .562 18.54 .625 23.11 .750 24.26 .750 25.40 .812 27.48 .875 30.23 1.000 33.66 1.125 34.93 1.188 C Flat In. mm. 14.27 .415 15.87 .467 19.05 .594 19.05 .594 20.62 .655 22.22 .721 25.40 .843 28.57 .968 30.17 1.029 D Threads 10.54 .4375-32 UN-2A 14.40 .5000-32 UN-2A 15.09 .6250-28 UN-2A 15.09 .6250-28 UN-2A 16.64 .6875-28 UN-2A 18.31 .7500-28 UN-2A 21.41 .8750-28 UN-2A 24.59 1.0000-28 UN-2A 26.14 1.0625-20 UN-2A ALTERNATE KEY POSITIONS In. ØE mm. .244 .330 .432 .493 .551 .620 .703 .863 .912 In. ØF mm. 6.20 .435 8.38 .483 10.97 .570 12.52 .593 14.00 .685 15.75 .725 17.86 .850 21.92 .973 23.16 1.028 11.05 12.27 14.48 15.06 17.40 18.42 21.59 24.71 26.11 ØG Tail Dia. F #23 .018/.022 (0.46/0.56) #12 .092/.096 (2.34/2.44) © 2007 Glenair, Inc. H J JAM NUT PANEL CUTOUT A Flat A° b° G #16 .060/.064 (1.52/1.63) Pos. A° B° a 150° 210° b 75° 210° c 95° 230° d 140° 275° Shell Size øb A FLAT CAGE Code 06324 5 6 7 8 9 10 12 14 15 In. mm. ± .002 ± 0.05 .425 .477 .604 .604 .665 .731 .853 .978 1.039 In. ØB 10.80 .448 12.12 .510 15.34 .635 15.34 .635 16.89 .695 18.57 .760 21.67 .885 24.84 1.010 26.39 1.070 mm. 11.38 12.95 16.13 16.13 17.65 19.30 22.48 25.65 27.18 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-11 Rev. 17-FEB-2009 E-Mail: [email protected] K L M Series 804 A Series 804 “Mighty Mouse” Push‑Pull Quick-Disconnect Series 804 PCB/Solder Receptacles – Front Panel Jam Nut .940 (23.88) KEYWAY B .830/.820 (21.08/20.83) øA .125 (3.18) MIN .025 (0.64) bTHREAd .30 (7.6) MAX PANEL THICKNESS D Front Panel Jam Nut 804-005-00 E G H J E FLAT C C F ød F dimensions Shell Size 5 6 7 8 9 10 12 14 15 In. ØA mm. .830 .885 .995 .995 1.075 1.140 1.340 1.390 1.450 B Threads 21.08 .5000-32 UN-2A 22.48 .5625-28 UN-2A 25.27 .6875-28 UN-2A 25.27 .6875-28 UN-2A 27.31 .7500-28 UN-2A 28.95 .8125-28 UN-2A 34.04 1.0000-28 UN-2A 35.31 1.0625-20 UN-2A 36.83 1.1250-28 UN-2A In. ØC mm. .244 .330 .432 .493 .551 .620 .703 .863 .912 In. ØE mm. 6.20 .625 8.38 .688 10.97 .812 12.52 .812 14.00 .875 15.75 .938 17.86 1.125 21.92 1.188 23.16 1.250 ALTERNATE KEY POSITIONS E Flat In. mm. 15.87 .470 17.47 .530 20.62 .663 20.62 .663 22.22 .720 23.82 .788 28.57 .970 30.18 1.020 31.75 1.093 11.94 13.46 16.84 16.84 18.29 20.02 24.64 25.91 27.76 ØF Tail Dia. #23 .018/.022 (0.46/0.56) #16 .060/.064 (1.52/1.63) #12 .092/.096 (2.34/2.44) JAM NUT PANEL CUTOUT A Flat K A° b° L M © 2007 Glenair, Inc. Pos. A° B° a 150° 210° b 75° 210° c 95° 230° d 140° 275° Shell Size øb A FLAT CAGE Code 06324 5 6 7 8 9 10 12 14 15 In. mm. ± .002 ± 0.05 .480 .540 .674 .674 .730 .799 .980 1.030 1.013 In. ØB 12.19 .510 13.72 .575 17.12 .698 17.12 .698 18.54 .760 20.29 .822 24.89 1.010 26.16 1.075 25.73 1.135 mm. 12.95 14.61 17.73 17.73 19.30 20.88 25.65 27.31 28.83 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-12 Rev. 19-AUG-2008 E-Mail: [email protected]