TLP597A TOSHIBA PHOTOCOUPLER PHOTO RELAY TLP597A TELECOMMUNICATION DATA ACQUISITION MEASUREMENT INSTRUMENTATION Unit: mm The TOSHIBA TLP597A consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP597A is a bi-directional switch can replace mechanical relays in many applications. Features • 6 pin DIP (DIP6) • 1-Form-A • Peak Off-State Voltage : 60 V (MIN.) • Trigger LED Current : 3 mA (MAX.) • On-State Current : 500 mA (MAX.) • On-State Resistance : 2 Ω (MAX.) • Isolation Voltage : 2500 Vrms (MIN.) • UL Recognized : UL1577, File No. E67349 JEDEC EIAJ TOSHIBA Weight: 0.4 g Pin Configuration (top view) 1 6 2 5 3 4 11−7A8 1 : ANODE 2 : CATHODE 3 : N.C. 4 : DRAIN D1 5 : SOURCE 6 : DRAIN D2 Schematic 1 6 2 5 4 1 2007-10-01 TLP597A Absolute Maximum Ratings (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT IF 50 mA Forward Current LED Forward Current Derating (Ta > = 25°C) ΔIF/°C −0.5 mA/°C Peak Forward Current (100 μs pulse, 100 pps) IFP 1 A Reverse Voltage VR 5 V Junction Temperature Tj 125 °C 60 V Off-State Output Terminal Voltage VOFF DETECTOR A Connection On-State RMS Current 500 ION B Connection On-State Current Derating (Ta > = 25°C) C Connection 1000 A Connection −5.0 ΔION/°C B Connection mA 500 −5.0 mA/°C −10.0 C Connection Tj 125 °C Operating Temperature Range Junction Temperature Topr −40~85 °C Storage Temperature Range Tstg −55~125 °C Lead Soldering Temperature (10 s) Tsol 260 °C Isolation Voltage (AC, 1 minute, R.H. < = 60%) (NOTE1) BVS 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (NOTE1):Device considered a two-terminal device : Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together. Recommended Operating Conditions CHARACTERISTIC Supply Voltage SYMBOL MIN. TYP. MAX. UNIT VDD ⎯ ⎯ 48 V Forward Current IF 5 7.5 25 mA On-State Current ION ⎯ ⎯ 400 mA Operating Temperature Topr −20 ⎯ 65 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 6 LOAD 1 6 2 5 AC or DC 2 5 3 4 3 4 A Connection LOAD B Connection 2 DC 1 6 2 5 3 4 LOAD DC C Connection 2007-10-01 TLP597A Individual Electrical Characteristics (Ta = 25°C) DETECTOR LED CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Forward Voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse Current IR VR = 5 V ⎯ ⎯ 10 μA Capacitance CT V = 0, f = 1 MHz ⎯ 30 ⎯ pF Off-State Current IOFF VOFF = 60 V ⎯ ⎯ 1 μA Capacitance COFF V = 0, f = 1 MHz ⎯ 130 ⎯ pF MIN. TYP. MAX. UNIT Coupled Electrical Characteristics (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION Trigger LED Current IFT ION = 500 mA ⎯ ⎯ 3 mA Close LED Current IFC IOFF = 100 μA 0.1 ⎯ ⎯ mA ION = 500 mA, IF = 5 mA ⎯ 1 2 ION = 500 mA, IF = 5 mA ⎯ 0.5 1 ION = 1000 mA, IF = 5 mA ⎯ 0.25 ⎯ MIN. TYP. MAX. UNIT ⎯ 0.8 ⎯ pF ⎯ Ω A Connection On-State Resistance RON B Connection C Connection Ω Isolation Characteristics (Ta = 25°C) CHARACTERISTIC SYMBOL Capacitance Input to Output Isolation Resistance TEST CONDITION CS VS = 0 V, f = 1 MHz RS VS = 500 V, R.H. < = 60% 5 × 10 BVS 10 14 2500 ⎯ ⎯ AC, 1 second (in oil) ⎯ 5000 ⎯ DC, 1 minute (in oil) ⎯ 5000 ⎯ Vdc MIN. TYP. MAX. UNIT ⎯ 0.6 2 ⎯ 0.1 1 ⎯ 0.3 1 ⎯ 0.1 1 AC, 1 minute Isolation Voltage 10 Vrms Switching Characteristics (Ta = 25°C) CHARACTERISTIC SYMBOL Turn-on Time tON Turn-off Time tOFF Turn-on Time tON Turn-off Time tOFF TEST CONDITION RL = 200 Ω VDD = 20 V, IF = 5 mA (NOTE 2) RL = 200 Ω VDD = 20 V, IF = 10 mA (NOTE 2) ms ms (NOTE 2) : SWITCHING TIME TEST CIRCUIT IF 1 6 RL VDD IF 2 VOUT VOUT 4 90% 10% tON 3 tOFF 2007-10-01 TLP597A IF - Ta ION - Ta 1200 ON-STATE CURRENT ION (mA) ALLOWABLE FORWARD CURRENT IF (mA) 100 60 40 20 0 -20 600 A,B CONNECTION 400 200 0 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE Ta(℃) ION - V ON - VF 100 750 50 30 ON-STATE CURRENT ION(mA) FORWARD CURRENT IF (mA) 800 0 20 40 60 80 100 120 AMBIENT TEMPERATURE Ta(℃) IF 10 5 3 1 0.5 0.3 0.1 0.6 C CONNECTION 1000 80 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE V（V) F 500 Ta=25℃,IF =5mA A CONNECTION 250 0 -250 -500 -750 -1 1.8 -0.5 0 0.5 ON-STATE VOLTAGE VON(V) IFT 5 TRIGGER LED CURRENT IFT(mA) ON-STATE RESISTANCE R ON(Ω) RON - Ta 2 ION =500mA IF =5mA 1.5 1 0.5 0 -20 0 20 40 60 80 AMBIENT TEMPERATURE Ta(℃) 100 4 4 1 - Ta ION=500mA t<1s 3 2 1 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE Ta(℃) 100 2007-10-01 TLP597A tON,tOFF - IF Ta=25℃ tON 1000 SWITCHING TIME tON,tOFF(μs) SWITCHING TIME tON,tOFF(μs) tON,tOFF 2000 VDD=20V, RL=200Ω 500 300 tOFF 100 50 30 1 30 50 100 3 5 10 FORWARD CURRENT IF (mA) 1000 800 - Ta VDD =20V, R L=200Ω IF =5mA tON 600 400 200 0 -40 tOFF -20 0 20 40 60 80 AMBIENT TEMPERATURE Ta(℃) 100 IOFF - Ta OFF-STATE CURRENT IOFF (nA) 100 V OFF =60V 10 1 0.1 -20 0 20 40 60 80 AMBIENT TEMPERATURE Ta(℃) 100 5 2007-10-01 TLP597A RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01