Vectron OX-0416-BED-108 Oven controlled crystal oscillator Datasheet

OX-041
Oven Controlled Crystal Oscillator
OX-041
Features
Applications
• Low Phase Noise
• High Stability
• SC-Cut Crystal Standard
• Frequency Range: 5 MHZ to 20 MHZ
• Previous Model: C4710, CO-724, CO-725, 6012, MC886
series, CO-714, CO-717
•
•
•
•
Test Equipment
Frequency Synthesizers
Position Location
Satellite Communications
Performance Specifications
Parameter
Min
Typ
Max
Units
Condition
1
Frequency Stabilities
vs. operating temperature range
(referenced to +25°C)
-30
-25
-20
-10
+30
+25
+20
+10
ppb
ppb
ppb
ppb
-40… +85°C
-40… +70°C
-20… +70°C
0… +70°C
Initial Tolerance
vs. supply voltage change
vs. load change
vs. aging / daily
vs. aging / 1 year
vs. aging / year (following years)
Warm-up Time
-100
-2.0
-2.0
-1.0
-100
-50
+100
+2.0
+2.0
+1.0
+100
+50
5
ppb
ppb
ppb
ppb
ppb
ppb
minutes
at time of shipment, nominal EFC
Vs ± 5%
Load ± 5%
after 72 hours of operation
after 72 hours of operation
to ± 10ppb of final frequency
(1 hour reading) @ +25°C
Supply Voltage (Vs)
Supply voltage (Standard)
11.4
12.0
12.6
VDC
Supply voltage (Option)
14.25
15.0
15.75
VDC
Oscillator Power Consumption
0.5
Watts
Oven Power Consumption
6.0
2.0
Watts
Watts
during warm-up
steady state @ +25°C
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Specifications
Parameter
Min
Typ
Max
Units
Condition
RF Output
Signal (Standard)
Sinewave
Load
50
Output Power
+3.0
ohm
+5.5
Harmonics
40
Duty cycle
+8.0
dBm
50 ohm load
-30
dBc
50 ohm load
60
%
HCMOS
Signal (Option)
15
Load
pF
Signal Level (Vol)
+0.5
+4.5
Signal Level (Voh)
VDC
45
Duty cycle
VDC
55
%
@ (Voh-Vol)/2
Frequency Tuning (EFC)
Tuning Range
±0.75
±1.25
Linearity
±2.0
ppm
20
%
Positive
Tuning Slope
Control Voltage Range
0.0
2.5
5.0
VDC
Additional Parameters1
Reference Voltage
4.9
5.1
VDC
Phase Noise (Standard) @10 MHZ
-80
-120
-140
-145
-150
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
Phase Noise3 (Option) @ 10 MHZ
-95
-125
-150
-160
-165
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
Weight
100
g
3
5.0
Processing & Packing
Handling & processing note
Absolute Maximum Ratings
Supply voltage (Vs)
28
V
Output Load
50
25
pF
ohm
Operable temperature range
-55
+85
°C
Storage temperature range
-55
+125
°C
with HCMOS signal
with Sinewave signal
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Outline Drawing / Enclosure
Dimensions in [mm] inches
Type A
Code
Height “H”
Pin Length “L”
0
26.42
6.35
1
20.00
6.35
Pin Connections
1
Oven Return
2
Oscillator Supply
3
Electronic Frequency Control (EFC)
4
Oven Supply
5
RF Output
6
Oscillator and Case Ground
7
Ground (Case)
Dimensions in [mm] inches
Type B
Code
Height “H”
Pin Length “L”
2
26.42
6.35
3
20.00
6.35
Pin Connections
1
Electronic Frequency Control (EFC)
2
Reference Voltage Output
3
RF Output
4
Ground (Case)
5
Supply Voltage Input (Vs)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Outline Drawing / Enclosure
Dimensions in [mm] inches
Type C
Code
Height “H”
Pin Length “L”
4
26.42
6.35
5
20.00
6.35
6
25.40
6.35
Pin Connections
1
Electronic Frequency Control (EFC)
2
Reference Voltage Output
3
RF Output
4
Ground (Case)
5
Supply Voltage Input (Vs)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
OX - 041 0 - B A T-108
0 - 10M0000000
Frequency
Product Family
OX: OCXO
Phase Noise Option
0: Standard
1: Option
Package
50 x 50 mm
Height
0: A26.42mm
1: A20.00mm
2: B26.42mm
3: B20.00mm
4: C26.42mm
5: C20.00mm
6: C25.40mm
Supply Voltage
A: 15 Vdc
B: 12 Vdc
Temperature Range / Stability Code
E-308: -40°C to +85°C, ±30ppb
D-258: -40°C to +70°C, ±25ppb
J-208: -20°C to +70°C, ±20ppb
T-108: 0°C to +70°C, ±10ppb
RF Output Code
A: HCMOS
E: Sinewave
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 3/24/2009 daf
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Similar pages