Emcore OTP-1DVIR2AR-C0-XX-IC Dvi / vga & stereo audio Datasheet

OTP-1DVI2A
Optiva® DVI / VGA & Stereo Audio
Optiva® SERIES Professional Media Transport
The Optiva® OTP-1DVI2A is the perfect solution for transmitting
the full range of VESA dual-link DVI and SMPTE compliant video over
long or short distances with a single wavelength. Other transport
systems do not offer a comparable range of signals and resolutions
over a single wavelength. The single fiber, single wavelength solution
is perfect for any professional audio / visual application such as
remote digital theaters, concerts, video conferencing, digital signage,
and similar applications like electronic billboards and sports arena
screens.
Optiva® was designed to maintain a quality uncompressed signal. The video resolution
input is the same video resolution that is output. The OTP-1DVI2A enables one to input
Features
DVI and output VGA or vice-versa. Switching and multicasting the OTP-1DVI2A over the
„
Optiva® Daisy-Chain Technology
OptiLinx® Switching Platform is quick and simple, making the OTP-1DVI2A the perfect
„
Multimode or single mode options (up to 80
solution for large-screen, high-resolution digital presentations allocating only one fiber
to each display.
km over one fiber)
Supports single and dual-link DVI resolutions
System Design
up to 2048 x 1536
Optiva® insert cards support both 19” rack mount and compact table top or wall mount-
„
Supports VGA resolutions up to 1920 x 1200
able enclosures. The 19” rack mount enclosure (Model: OT-CC-16-100) can support up to
„
Supports Component Video (RGB) up to 1080p
„
H & V Sync Frequency range of 60 to 85 Hz
(Model: OT-CC-16-200-RPS). Also available in the 19” rack mount form factor is a 4-slot
(vertical)
enclosure; which houses 4 insert cards in 1RU of rack space (Model: OT-CC-4-1U). The
Uses all-digital processing for crystal clear
compact one slot (Model: OT-DTCR-1) and two slot (Model: OT-DTCR-2) enclosures both
picture with zero signal degradation
use an external power supply (Model: PS-9012).
„
16 insert cards. It also supports dual-redundant, hot-swappable power supplies (Model:
OT-CC-16-100-RPS) utilizing two PS-100 power supplies or two PS-200 power supplies
„
„
Real-time video transmission for exceptional
quality and resolution
„
Standard DVI-I video connector (HD-15
adapter is available for RGB/VGA interface)
Applications
„
Digital Signage / Remote Kiosks
„
Video Conferencing / Digital Cinema
„
High-Resolution Presentations
„
DVI / VGA Switching & Routing
„
Professional Home Theater
Copyright © 2008 Emcore Corporation
VGA
DVI
•
•
640 x 480
VGA
•
•
800 x 600
SVGA
85
•
•
1024 x 768
XGA
85
•
•
1280 x 720
WXGA
85
•
•
1280 x 1024
SXGA
85
•
•
1400 x 1050
SXGA+
75
•
•
1600 x 1050
UXGA
60 (VGA), 75 (DVI)
•
•
1680 x 1050
WSXGA+
60
•
•
1920 x 1200
WUXGA
60 (VGA), 75 (DVI)
•
2048 x 1536
QXGA
xRGB
Resolutions
Max Refresh Rate (Hz)
85
60
Resolutions
Max Refresh Rate (Hz)
•
480i / 480p
60
•
720p
60
•
1080i / 1080p
60
858 450 0143
858 450 0155
[email protected]
„
Some Resolutions utilize
Reduced Blanking Technology
www.emcore.com
OTP-1DVI2A
Optiva® DVI / VGA & Stereo Audio
Optiva® SERIES Professional Media Transport
Models
Video
„
Transmitter
Receiver
OTP-1DVIT2AT-C0-XX-IC
OTP-1DVIR2AR-C0-XX-IC
OTP-1DVIT2AT-C1-XX-IC
OTP-1DVIR2AR-C1-XX-IC
OTP-1DVIT2AT-C2-XX-IC
For ordering, please substitute
“XX” in the model for one of
the following optical
connectors: ST, FC, SC, or LC.
Specifications
Values
Standards
DVI 1.0/VESA
Resolutions
(see chart on front side)
OTP-1DVIR2AR-C2-XX-IC
Connector
DVI-I (VGA adapter avaiable)
OTP-1DVIT2AT-C2D-XX-IC
OTP-1DVIR2AR-C2D-XX-IC
Color Depth
24 Bit
OTP-1DVIT2AT-C3-XX-IC
OTP-1DVIR2AR-C3-XX-IC
VGA Video Bandwidth
780 MHz
OTP-1DVIT2AT-C3D-XX-IC
OTP-1DVIR2AR-C3D-XX-IC
Analog Video Output Level
1V p-p
OTP-1DVIT2AT-L4X3-XX-IC
OTP-1DVIR2AR-L4X3-XX-IC
Video Signal-to-Noise Ratio
>55 dB
Audio
Optical Specifications
Code
Fiber Type
C0
Multimode
Wavelength
Optical Budget
850 nm
7 dB
Distance
100 m
C1
Multimode
1310 nm
7 dB
1 Km
C2
Singlemode
1310 nm
7 dB
10 Km
C2D
Singlemode
1310 nm (D)
12 dB
Singlemode
1550 nm
17 dB
40 Km
C3D
Singlemode
1550 nm (D)
25 dB
60 Km
Singlemode
1270-1610 nm (CWDM)
Varies
Chromatic dispersion as well as
other losses should also be taken
into account
20 Km
C3
L4X3
„
20-70 Km
Specifications
Values
Channels
24-Bit Stereo Audio
Impedance
47k Ohm Unbalanced
Audio Levels
2V p-p Max
Frequency Response
20 Hz to 20 KHz (±0.1 dB)
Signal-to-Noise Ratio
> 85 dB @ 1KHz (weighted)
Total Harmonic Distortion
< 0.1% @ 1KHz
Connector Type
1/8” Stereo Headphone Jack
General
Functional Diagram
Specifications
OTP-1DVIT2AT
DVI Input
VGA Input
2 Analog Audio Inputs
AutoSense
Values
Dimensions (Insert Card)
6.3”D x 0.8”W x 4.0”H
Weight
11 oz.
Operating Temperature
0˚ to +50˚C
OTP-1DVIR2AR
DVI Output
Opti va®
Core
Optical
Transmitter
Opti va®
Daisy-Chain®
Processing
VGA Output
Opti va®
Core
Opti va®
SNMP
2 Analog Audio Outputs
Optical
Recei ver
Opti va®
SNMP
Storage Temperature
-30˚C to +85˚C
Humidity
0 to 95% non-condensing
Power Consumption
~8 Watts
MTBF
100 K Hours
Opti va®
Daisy-Chain®
Processing
Monitoring & Control
Daisy-Chaine d
Vi deo/ Audi o/Data
Opti va® Insert Car ds
Opti vaVie w®
SNMP
Manage ment
Suite
Opti vaVie w®
SNMP
Manage ment
Suite
Daisy-Chaine d
Vi deo/ Audi o/Data
Opti va® Insert Car ds
Specifications
Values
Local
Front panel LED status and alert
indicators
Remote
OptivaView® SNMP
Management Suite
FCC
MADE IN
PART 15
COMPLIANT
USA
Document Revision 08/14/2008
Copyright © 2008 Emcore Corporation
858 450 0143
858 450 0155
[email protected]
www.emcore.com
Similar pages