Intelligent Power Devices (IPDs) MIP504 Silicon MOS IC ■ Features unit: mm ● 3-pin intelligent power device ● Five protective functions (over-current, over-voltage, short circuit load, over heat, ESD) are integrated ● Acceptable both AC and DC power supply 4.0±0.2 0.7±0.2 8.0±0.2 5.0±0.2 ■ Applications ● Lamp drive 13.5±0.5 0.7±0.1 ■ Absolute Maximum Ratings (Ta = 25°C) Symbol Ratings Unit Drain to Source voltage VDS 60 V Output peak current IOP ±5 A Output current IO −1 to 2*1 A Input voltage VIN − 0.5 to 6 V Input current IIN ±10 mA Allowable power dissipation PD 1 *2 W Operating ambient temperature Topr −40 to +85 °C Channel temperature Tch 150 °C Storage temperature Tstg −55 to +150 °C *1 *2 +0.15 0.45 –0.1 1.27 1.27 1 2 3 2.54±0.15 +0.15 0.45 –0.1 2.3±0.2 Parameter 1: Source 2: Drain 3: IN TO-92 NL Package Maximum load current, not the average current. Mounting on the PCB (Glass epoxy board, the size of 100mm × 100mm). (Ta = 25°C) ■ Block Diagram D Over voltage protection Short circuit load protection IN Gate cut-off circuit ESD protection Over heat protection Over current protection S 1 Intelligent Power Devices (IPDs) MIP504 ■ Electrical Characteristics (TC = 25 ± 2°C) Parameter Symbol Drain to Source ON-resistance RDS(on) VIN = 5V, IDS = 1.5A Conditions min Drain to Source ON-voltage VDS(on) VIN = 5V, IDS = 1.5A Drain clamp voltage VDS(CLP) VIN = 0, IDS = 3mA Drain OFF current (1) IDS(off)1 VIN = 0, VDS = 12V 50 80 µA Drain OFF current (2) IDS(off)2 VIN = 0, VDS = 25V 0.1 0.16 mA Drain OFF current (3) IDS(off)3 VIN = 0, VDS = 40V 0.16 0.26 mA Input voltage (High) VIN(H) IDS = 1.5A Input voltage (Low) VIN(L) IDS = 0.1mA Input current IIN(on) VIN = 5V, VDS = 0 Over current protection limit IOCP VIN = 5V, VDS = 3V Short circuit load protection limit VDS(SHT) VIN = 5V 60 typ max Unit 0.38 0.5 Ω 0.57 0.75 V 70 V 4 V 0.15 3.8 0.8 V 0.5 mA 5 A 3 V Note: The oscillation of the output current is caused when the drain voltage exceeds the short circuit load detection voltage under the ON state of output. ■ Electrical Characteristics (TC = 25 ± 2°C) Parameter Over heat protection temperature Symbol TSHD Conditions VIN = 5V min typ 140 Note 1: The above values of characteristics are not guaranteed values and are only references for designing. Note 2: If the chip temperature exceeds the "Over Heat Protection Temperature", output current is shut down. 2 max Unit °C